This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013/Debian) (format=pdflatex 2014.6.20) 23 JUN 2014 17:12 entering extended mode restricted \write18 enabled. %&-line parsing enabled. **refman (./refman.tex LaTeX2e <2011/06/27> Babel <3.9h> and hyphenation patterns for 13 languages loaded. (/usr/share/texlive/texmf-dist/tex/latex/base/book.cls Document Class: book 2007/10/19 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/bk10.clo File: bk10.clo 2007/10/19 v1.4h Standard LaTeX file (size option) ) \c@part=\count79 \c@chapter=\count80 \c@section=\count81 \c@subsection=\count82 \c@subsubsection=\count83 \c@paragraph=\count84 \c@subparagraph=\count85 \c@figure=\count86 \c@table=\count87 \abovecaptionskip=\skip41 \belowcaptionskip=\skip42 \bibindent=\dimen102 ) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty Package: geometry 2010/09/12 v5.6 Page Geometry (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty Package: keyval 1999/03/16 v1.13 key=value parser (DPC) \KV@toks@=\toks14 ) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO) Package ifpdf Info: pdfTeX in PDF mode is detected. ) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty Package: ifvtex 2010/03/01 v1.5 Detect VTeX and its facilities (HO) Package ifvtex Info: VTeX not detected. ) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional ) \Gm@cnth=\count88 \Gm@cntv=\count89 \c@Gm@tempcnt=\count90 \Gm@bindingoffset=\dimen103 \Gm@wd@mp=\dimen104 \Gm@odd@mp=\dimen105 \Gm@even@mp=\dimen106 \Gm@layoutwidth=\dimen107 \Gm@layoutheight=\dimen108 \Gm@layouthoffset=\dimen109 \Gm@layoutvoffset=\dimen110 \Gm@dimlist=\toks15 ) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty Package: makeidx 2000/03/29 v1.0m Standard LaTeX package ) (/usr/share/texlive/texmf-dist/tex/latex/natbib/natbib.sty Package: natbib 2010/09/13 8.31b (PWD, AO) \bibhang=\skip43 \bibsep=\skip44 LaTeX Info: Redefining \cite on input line 694. \c@NAT@ctr=\count91 ) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR) (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty Package: trig 1999/03/16 v1.09 sin cos tan (DPC) ) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/graphics.cfg File: graphics.cfg 2010/04/23 v1.9 graphics configuration of TeX Live ) Package graphics Info: Driver file: pdftex.def on input line 91. (/usr/share/texlive/texmf-dist/tex/latex/pdftex-def/pdftex.def File: pdftex.def 2011/05/27 v0.06d Graphics/color for pdfTeX (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO) ) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO) ) \Gread@gobject=\count92 )) \Gin@req@height=\dimen111 \Gin@req@width=\dimen112 ) (/usr/share/texlive/texmf-dist/tex/latex/tools/multicol.sty Package: multicol 2011/06/27 v1.7a multicolumn formatting (FMi) \c@tracingmulticols=\count93 \mult@box=\box26 \multicol@leftmargin=\dimen113 \c@unbalance=\count94 \c@collectmore=\count95 \doublecol@number=\count96 \multicoltolerance=\count97 \multicolpretolerance=\count98 \full@width=\dimen114 \page@free=\dimen115 \premulticols=\dimen116 \postmulticols=\dimen117 \multicolsep=\skip45 \multicolbaselineskip=\skip46 \partial@page=\box27 \last@line=\box28 \mult@rightbox=\box29 \mult@grightbox=\box30 \mult@gfirstbox=\box31 \mult@firstbox=\box32 \@tempa=\box33 \@tempa=\box34 \@tempa=\box35 \@tempa=\box36 \@tempa=\box37 \@tempa=\box38 \@tempa=\box39 \@tempa=\box40 \@tempa=\box41 \@tempa=\box42 \@tempa=\box43 \@tempa=\box44 \@tempa=\box45 \@tempa=\box46 \@tempa=\box47 \@tempa=\box48 \@tempa=\box49 \c@columnbadness=\count99 \c@finalcolumnbadness=\count100 \last@try=\dimen118 \multicolovershoot=\dimen119 \multicolundershoot=\dimen120 \mult@nat@firstbox=\box50 \colbreak@box=\box51 \multicol@sort@counter=\count101 ) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty Package: float 2001/11/08 v1.3d Float enhancements (AL) \c@float@type=\count102 \float@exts=\toks16 \float@box=\box52 \@float@everytoks=\toks17 \@floatcapt=\box53 ) (/usr/share/texlive/texmf-dist/tex/latex/listings/listings.sty \lst@mode=\count103 \lst@gtempboxa=\box54 \lst@token=\toks18 \lst@length=\count104 \lst@currlwidth=\dimen121 \lst@column=\count105 \lst@pos=\count106 \lst@lostspace=\dimen122 \lst@width=\dimen123 \lst@newlines=\count107 \lst@lineno=\count108 \lst@maxwidth=\dimen124 (/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty File: lstmisc.sty 2013/08/26 1.5b (Carsten Heinz) \c@lstnumber=\count109 \lst@skipnumbers=\count110 \lst@framebox=\box55 ) (/usr/share/texlive/texmf-dist/tex/latex/listings/listings.cfg File: listings.cfg 2013/08/26 1.5b listings configuration )) Package: listings 2013/08/26 1.5b (Carsten Heinz) (/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty Package: color 2005/11/14 v1.0j Standard LaTeX Color (DPC) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/color.cfg File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive ) Package color Info: Driver file: pdftex.def on input line 130. ) (/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty Package: ifthen 2001/05/26 v1.1c Standard LaTeX ifthen package (DPC) ) (/usr/share/texmf/tex/latex/xcolor/xcolor.sty Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/color.cfg File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive ) Package xcolor Info: Driver file: pdftex.def on input line 225. (/usr/share/texlive/texmf-dist/tex/latex/colortbl/colortbl.sty Package: colortbl 2012/02/13 v1.0a Color table columns (DPC) (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty Package: array 2008/09/09 v2.4c Tabular extension package (FMi) \col@sep=\dimen125 \extrarowheight=\dimen126 \NC@list=\toks19 \extratabsurround=\skip47 \backup@length=\skip48 ) \everycr=\toks20 \minrowclearance=\skip49 ) LaTeX Info: Redefining \color on input line 702. \rownum=\count111 Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337. Package xcolor Info: Model `hsb' substituted by `rgb' on input line 1341. Package xcolor Info: Model `RGB' extended on input line 1353. Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355. Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356. Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357. Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358. Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359. Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360. ) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty Package: textcomp 2005/09/27 v1.99g Standard LaTeX package Package textcomp Info: Sub-encoding information: (textcomp) 5 = only ISO-Adobe without \textcurrency (textcomp) 4 = 5 + \texteuro (textcomp) 3 = 4 + \textohm (textcomp) 2 = 3 + \textestimated + \textcurrency (textcomp) 1 = TS1 - \textcircled - \t (textcomp) 0 = TS1 (full) (textcomp) Font families with sub-encoding setting implement (textcomp) only a restricted character set as indicated. (textcomp) Family '?' is the default used for unknown fonts. (textcomp) See the documentation for details. Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 71. (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file ) LaTeX Info: Redefining \oldstylenums on input line 266. Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 281. Package textcomp Info: Setting cmss sub-encoding to TS1/0 on input line 282. Package textcomp Info: Setting cmtt sub-encoding to TS1/0 on input line 283. Package textcomp Info: Setting cmvtt sub-encoding to TS1/0 on input line 284. Package textcomp Info: Setting cmbr sub-encoding to TS1/0 on input line 285. Package textcomp Info: Setting cmtl sub-encoding to TS1/0 on input line 286. Package textcomp Info: Setting ccr sub-encoding to TS1/0 on input line 287. Package textcomp Info: Setting ptm sub-encoding to TS1/4 on input line 288. Package textcomp Info: Setting pcr sub-encoding to TS1/4 on input line 289. Package textcomp Info: Setting phv sub-encoding to TS1/4 on input line 290. Package textcomp Info: Setting ppl sub-encoding to TS1/3 on input line 291. Package textcomp Info: Setting pag sub-encoding to TS1/4 on input line 292. Package textcomp Info: Setting pbk sub-encoding to TS1/4 on input line 293. Package textcomp Info: Setting pnc sub-encoding to TS1/4 on input line 294. Package textcomp Info: Setting pzc sub-encoding to TS1/4 on input line 295. Package textcomp Info: Setting bch sub-encoding to TS1/4 on input line 296. Package textcomp Info: Setting put sub-encoding to TS1/5 on input line 297. Package textcomp Info: Setting uag sub-encoding to TS1/5 on input line 298. Package textcomp Info: Setting ugq sub-encoding to TS1/5 on input line 299. Package textcomp Info: Setting ul8 sub-encoding to TS1/4 on input line 300. Package textcomp Info: Setting ul9 sub-encoding to TS1/4 on input line 301. Package textcomp Info: Setting augie sub-encoding to TS1/5 on input line 302. Package textcomp Info: Setting dayrom sub-encoding to TS1/3 on input line 303. Package textcomp Info: Setting dayroms sub-encoding to TS1/3 on input line 304. Package textcomp Info: Setting pxr sub-encoding to TS1/0 on input line 305. Package textcomp Info: Setting pxss sub-encoding to TS1/0 on input line 306. Package textcomp Info: Setting pxtt sub-encoding to TS1/0 on input line 307. Package textcomp Info: Setting txr sub-encoding to TS1/0 on input line 308. Package textcomp Info: Setting txss sub-encoding to TS1/0 on input line 309. Package textcomp Info: Setting txtt sub-encoding to TS1/0 on input line 310. Package textcomp Info: Setting lmr sub-encoding to TS1/0 on input line 311. Package textcomp Info: Setting lmdh sub-encoding to TS1/0 on input line 312. Package textcomp Info: Setting lmss sub-encoding to TS1/0 on input line 313. Package textcomp Info: Setting lmssq sub-encoding to TS1/0 on input line 314. Package textcomp Info: Setting lmvtt sub-encoding to TS1/0 on input line 315. Package textcomp Info: Setting qhv sub-encoding to TS1/0 on input line 316. Package textcomp Info: Setting qag sub-encoding to TS1/0 on input line 317. Package textcomp Info: Setting qbk sub-encoding to TS1/0 on input line 318. Package textcomp Info: Setting qcr sub-encoding to TS1/0 on input line 319. Package textcomp Info: Setting qcs sub-encoding to TS1/0 on input line 320. Package textcomp Info: Setting qpl sub-encoding to TS1/0 on input line 321. Package textcomp Info: Setting qtm sub-encoding to TS1/0 on input line 322. Package textcomp Info: Setting qzc sub-encoding to TS1/0 on input line 323. Package textcomp Info: Setting qhvc sub-encoding to TS1/0 on input line 324. Package textcomp Info: Setting futs sub-encoding to TS1/4 on input line 325. Package textcomp Info: Setting futx sub-encoding to TS1/4 on input line 326. Package textcomp Info: Setting futj sub-encoding to TS1/4 on input line 327. Package textcomp Info: Setting hlh sub-encoding to TS1/3 on input line 328. Package textcomp Info: Setting hls sub-encoding to TS1/3 on input line 329. Package textcomp Info: Setting hlst sub-encoding to TS1/3 on input line 330. Package textcomp Info: Setting hlct sub-encoding to TS1/5 on input line 331. Package textcomp Info: Setting hlx sub-encoding to TS1/5 on input line 332. Package textcomp Info: Setting hlce sub-encoding to TS1/5 on input line 333. Package textcomp Info: Setting hlcn sub-encoding to TS1/5 on input line 334. Package textcomp Info: Setting hlcw sub-encoding to TS1/5 on input line 335. Package textcomp Info: Setting hlcf sub-encoding to TS1/5 on input line 336. Package textcomp Info: Setting pplx sub-encoding to TS1/3 on input line 337. Package textcomp Info: Setting pplj sub-encoding to TS1/3 on input line 338. Package textcomp Info: Setting ptmx sub-encoding to TS1/4 on input line 339. Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 340. ) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty Package: alltt 1997/06/16 v2.0g defines alltt environment ) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty Package: hyperref 2012/11/06 v6.83m Hypertext links for LaTeX (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty Package: hobsub-hyperref 2012/05/28 v1.13 Bundle oberdiek, subset hyperref (HO) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty Package: hobsub-generic 2012/05/28 v1.13 Bundle oberdiek, subset generic (HO) Package: hobsub 2012/05/28 v1.13 Construct package bundles (HO) Package hobsub Info: Skipping package `infwarerr' (already loaded). Package hobsub Info: Skipping package `ltxcmds' (already loaded). Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO) Package ifluatex Info: LuaTeX not detected. Package hobsub Info: Skipping package `ifvtex' (already loaded). Package: intcalc 2007/09/27 v1.1 Expandable calculations with integers (HO) Package hobsub Info: Skipping package `ifpdf' (already loaded). Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO) Package etexcmds Info: Could not find \expanded. (etexcmds) That can mean that you are not using pdfTeX 1.50 or (etexcmds) that some package has redefined \expanded. (etexcmds) In the latter case, load this package earlier. Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO) Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO) Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO ) Package pdftexcmds Info: LuaTeX not detected. Package pdftexcmds Info: \pdf@primitive is available. Package pdftexcmds Info: \pdf@ifprimitive is available. Package pdftexcmds Info: \pdfdraftmode found. Package: pdfescape 2011/11/25 v1.13 Implements pdfTeX's escape features (HO) Package: bigintcalc 2012/04/08 v1.3 Expandable calculations on big integers (HO ) Package: bitset 2011/01/30 v1.1 Handle bit-vector datatype (HO) Package: uniquecounter 2011/01/30 v1.2 Provide unlimited unique counter (HO) ) Package hobsub Info: Skipping package `hobsub' (already loaded). Package: letltxmacro 2010/09/02 v1.4 Let assignment for LaTeX macros (HO) Package: hopatch 2012/05/28 v1.2 Wrapper for package hooks (HO) Package: xcolor-patch 2011/01/30 xcolor patch Package: atveryend 2011/06/30 v1.8 Hooks at the very end of document (HO) Package atveryend Info: \enddocument detected (standard20110627). Package: atbegshi 2011/10/05 v1.16 At begin shipout hook (HO) Package: refcount 2011/10/16 v3.4 Data extraction from label references (HO) Package: hycolor 2011/01/30 v1.7 Color options for hyperref/bookmark (HO) ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty Package: auxhook 2011/03/04 v1.3 Hooks for auxiliary files (HO) ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty Package: kvoptions 2011/06/30 v3.11 Key value format for package options (HO) ) \@linkdim=\dimen127 \Hy@linkcounter=\count112 \Hy@pagecounter=\count113 (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def File: pd1enc.def 2012/11/06 v6.83m Hyperref: PDFDocEncoding definition (HO) ) \Hy@SavedSpaceFactor=\count114 (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive ) Package hyperref Info: Option `colorlinks' set `true' on input line 4319. Package hyperref Info: Option `unicode' set `true' on input line 4319. (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def File: puenc.def 2012/11/06 v6.83m Hyperref: PDF Unicode definition (HO) ) Package hyperref Info: Hyper figures OFF on input line 4443. Package hyperref Info: Link nesting OFF on input line 4448. Package hyperref Info: Hyper index ON on input line 4451. Package hyperref Info: Plain pages OFF on input line 4458. Package hyperref Info: Backreferencing ON on input line 4461. Package hyperref Info: Implicit mode ON; LaTeX internals redefined. Package hyperref Info: Bookmarks ON on input line 4688. (/usr/share/texlive/texmf-dist/tex/latex/hyperref/backref.sty Package: backref 2012/07/25 v1.38 Bibliographical back referencing (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty Package: rerunfilecheck 2011/04/15 v1.7 Rerun checks for auxiliary files (HO) Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 2 82. )) \c@Hy@tempcnt=\count115 (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty \Urlmuskip=\muskip10 Package: url 2013/09/16 ver 3.4 Verb mode for urls, etc. ) LaTeX Info: Redefining \url on input line 5041. \XeTeXLinkMargin=\dimen128 \Fld@menulength=\count116 \Field@Width=\dimen129 \Fld@charsize=\dimen130 Package hyperref Info: Hyper figures OFF on input line 6295. Package hyperref Info: Link nesting OFF on input line 6300. Package hyperref Info: Hyper index ON on input line 6303. Package hyperref Info: backreferencing ON on input line 6308. Package hyperref Info: Link coloring ON on input line 6313. Package hyperref Info: Link coloring with OCG OFF on input line 6320. Package hyperref Info: PDF/A mode OFF on input line 6325. LaTeX Info: Redefining \ref on input line 6365. LaTeX Info: Redefining \pageref on input line 6369. \Hy@abspage=\count117 \c@Item=\count118 \c@Hfootnote=\count119 ) Package hyperref Message: Driver: hpdftex. (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def File: hpdftex.def 2012/11/06 v6.83m Hyperref driver for pdfTeX \Fld@listcount=\count120 \c@bookmark@seq@number=\count121 \Hy@SectionHShift=\skip50 ) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty Package: inputenc 2008/03/30 v1.1d Input encoding file \inpenc@prehook=\toks21 \inpenc@posthook=\toks22 (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def File: utf8.def 2008/04/05 v1.1m UTF-8 support for inputenc Now handling font encoding OML ... ... no UTF-8 mapping file for font encoding OML Now handling font encoding T1 ... ... processing UTF-8 mapping file for font encoding T1 (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu File: t1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc defining Unicode char U+00A1 (decimal 161) defining Unicode char U+00A3 (decimal 163) defining Unicode char U+00AB (decimal 171) defining Unicode char U+00BB (decimal 187) defining Unicode char U+00BF (decimal 191) defining Unicode char U+00C0 (decimal 192) defining Unicode char U+00C1 (decimal 193) defining Unicode char U+00C2 (decimal 194) defining Unicode char U+00C3 (decimal 195) defining Unicode char U+00C4 (decimal 196) defining Unicode char U+00C5 (decimal 197) defining Unicode char U+00C6 (decimal 198) defining Unicode char U+00C7 (decimal 199) defining Unicode char U+00C8 (decimal 200) defining Unicode char U+00C9 (decimal 201) defining Unicode char U+00CA (decimal 202) defining Unicode char U+00CB (decimal 203) defining Unicode char U+00CC (decimal 204) defining Unicode char U+00CD (decimal 205) defining Unicode char U+00CE (decimal 206) defining Unicode char U+00CF (decimal 207) defining Unicode char U+00D0 (decimal 208) defining Unicode char U+00D1 (decimal 209) defining Unicode char U+00D2 (decimal 210) defining Unicode char U+00D3 (decimal 211) defining Unicode char U+00D4 (decimal 212) defining Unicode char U+00D5 (decimal 213) defining Unicode char U+00D6 (decimal 214) defining Unicode char U+00D8 (decimal 216) defining Unicode char U+00D9 (decimal 217) defining Unicode char U+00DA (decimal 218) defining Unicode char U+00DB (decimal 219) defining Unicode char U+00DC (decimal 220) defining Unicode char U+00DD (decimal 221) defining Unicode char U+00DE (decimal 222) defining Unicode char U+00DF (decimal 223) defining Unicode char U+00E0 (decimal 224) defining Unicode char U+00E1 (decimal 225) defining Unicode char U+00E2 (decimal 226) defining Unicode char U+00E3 (decimal 227) defining Unicode char U+00E4 (decimal 228) defining Unicode char U+00E5 (decimal 229) defining Unicode char U+00E6 (decimal 230) defining Unicode char U+00E7 (decimal 231) defining Unicode char U+00E8 (decimal 232) defining Unicode char U+00E9 (decimal 233) defining Unicode char U+00EA (decimal 234) defining Unicode char U+00EB (decimal 235) defining Unicode char U+00EC (decimal 236) defining Unicode char U+00ED (decimal 237) defining Unicode char U+00EE (decimal 238) defining Unicode char U+00EF (decimal 239) defining Unicode char U+00F0 (decimal 240) defining Unicode char U+00F1 (decimal 241) defining Unicode char U+00F2 (decimal 242) defining Unicode char U+00F3 (decimal 243) defining Unicode char U+00F4 (decimal 244) defining Unicode char U+00F5 (decimal 245) defining Unicode char U+00F6 (decimal 246) defining Unicode char U+00F8 (decimal 248) defining Unicode char U+00F9 (decimal 249) defining Unicode char U+00FA (decimal 250) defining Unicode char U+00FB (decimal 251) defining Unicode char U+00FC (decimal 252) defining Unicode char U+00FD (decimal 253) defining Unicode char U+00FE (decimal 254) defining Unicode char U+00FF (decimal 255) defining Unicode char U+0102 (decimal 258) defining Unicode char U+0103 (decimal 259) defining Unicode char U+0104 (decimal 260) defining Unicode char U+0105 (decimal 261) defining Unicode char U+0106 (decimal 262) defining Unicode char U+0107 (decimal 263) defining Unicode char U+010C (decimal 268) defining Unicode char U+010D (decimal 269) defining Unicode char U+010E (decimal 270) defining Unicode char U+010F (decimal 271) defining Unicode char U+0110 (decimal 272) defining Unicode char U+0111 (decimal 273) defining Unicode char U+0118 (decimal 280) defining Unicode char U+0119 (decimal 281) defining Unicode char U+011A (decimal 282) defining Unicode char U+011B (decimal 283) defining Unicode char U+011E (decimal 286) defining Unicode char U+011F (decimal 287) defining Unicode char U+0130 (decimal 304) defining Unicode char U+0131 (decimal 305) defining Unicode char U+0132 (decimal 306) defining Unicode char U+0133 (decimal 307) defining Unicode char U+0139 (decimal 313) defining Unicode char U+013A (decimal 314) defining Unicode char U+013D (decimal 317) defining Unicode char U+013E (decimal 318) defining Unicode char U+0141 (decimal 321) defining Unicode char U+0142 (decimal 322) defining Unicode char U+0143 (decimal 323) defining Unicode char U+0144 (decimal 324) defining Unicode char U+0147 (decimal 327) defining Unicode char U+0148 (decimal 328) defining Unicode char U+014A (decimal 330) defining Unicode char U+014B (decimal 331) defining Unicode char U+0150 (decimal 336) defining Unicode char U+0151 (decimal 337) defining Unicode char U+0152 (decimal 338) defining Unicode char U+0153 (decimal 339) defining Unicode char U+0154 (decimal 340) defining Unicode char U+0155 (decimal 341) defining Unicode char U+0158 (decimal 344) defining Unicode char U+0159 (decimal 345) defining Unicode char U+015A (decimal 346) defining Unicode char U+015B (decimal 347) defining Unicode char U+015E (decimal 350) defining Unicode char U+015F (decimal 351) defining Unicode char U+0160 (decimal 352) defining Unicode char U+0161 (decimal 353) defining Unicode char U+0162 (decimal 354) defining Unicode char U+0163 (decimal 355) defining Unicode char U+0164 (decimal 356) defining Unicode char U+0165 (decimal 357) defining Unicode char U+016E (decimal 366) defining Unicode char U+016F (decimal 367) defining Unicode char U+0170 (decimal 368) defining Unicode char U+0171 (decimal 369) defining Unicode char U+0178 (decimal 376) defining Unicode char U+0179 (decimal 377) defining Unicode char U+017A (decimal 378) defining Unicode char U+017B (decimal 379) defining Unicode char U+017C (decimal 380) defining Unicode char U+017D (decimal 381) defining Unicode char U+017E (decimal 382) defining Unicode char U+200C (decimal 8204) defining Unicode char U+2013 (decimal 8211) defining Unicode char U+2014 (decimal 8212) defining Unicode char U+2018 (decimal 8216) defining Unicode char U+2019 (decimal 8217) defining Unicode char U+201A (decimal 8218) defining Unicode char U+201C (decimal 8220) defining Unicode char U+201D (decimal 8221) defining Unicode char U+201E (decimal 8222) defining Unicode char U+2030 (decimal 8240) defining Unicode char U+2031 (decimal 8241) defining Unicode char U+2039 (decimal 8249) defining Unicode char U+203A (decimal 8250) defining Unicode char U+2423 (decimal 9251) ) Now handling font encoding OT1 ... ... processing UTF-8 mapping file for font encoding OT1 (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu File: ot1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc defining Unicode char U+00A1 (decimal 161) defining Unicode char U+00A3 (decimal 163) defining Unicode char U+00B8 (decimal 184) defining Unicode char U+00BF (decimal 191) defining Unicode char U+00C5 (decimal 197) defining Unicode char U+00C6 (decimal 198) defining Unicode char U+00D8 (decimal 216) defining Unicode char U+00DF (decimal 223) defining Unicode char U+00E6 (decimal 230) defining Unicode char U+00EC (decimal 236) defining Unicode char U+00ED (decimal 237) defining Unicode char U+00EE (decimal 238) defining Unicode char U+00EF (decimal 239) defining Unicode char U+00F8 (decimal 248) defining Unicode char U+0131 (decimal 305) defining Unicode char U+0141 (decimal 321) defining Unicode char U+0142 (decimal 322) defining Unicode char U+0152 (decimal 338) defining Unicode char U+0153 (decimal 339) defining Unicode char U+2013 (decimal 8211) defining Unicode char U+2014 (decimal 8212) defining Unicode char U+2018 (decimal 8216) defining Unicode char U+2019 (decimal 8217) defining Unicode char U+201C (decimal 8220) defining Unicode char U+201D (decimal 8221) ) Now handling font encoding OMS ... ... processing UTF-8 mapping file for font encoding OMS (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu File: omsenc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc defining Unicode char U+00A7 (decimal 167) defining Unicode char U+00B6 (decimal 182) defining Unicode char U+00B7 (decimal 183) defining Unicode char U+2020 (decimal 8224) defining Unicode char U+2021 (decimal 8225) defining Unicode char U+2022 (decimal 8226) ) Now handling font encoding OMX ... ... no UTF-8 mapping file for font encoding OMX Now handling font encoding U ... ... no UTF-8 mapping file for font encoding U Now handling font encoding TS1 ... ... processing UTF-8 mapping file for font encoding TS1 (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu File: ts1enc.dfu 2008/04/05 v1.1m UTF-8 support for inputenc defining Unicode char U+00A2 (decimal 162) defining Unicode char U+00A3 (decimal 163) defining Unicode char U+00A4 (decimal 164) defining Unicode char U+00A5 (decimal 165) defining Unicode char U+00A6 (decimal 166) defining Unicode char U+00A7 (decimal 167) defining Unicode char U+00A8 (decimal 168) defining Unicode char U+00A9 (decimal 169) defining Unicode char U+00AA (decimal 170) defining Unicode char U+00AC (decimal 172) defining Unicode char U+00AE (decimal 174) defining Unicode char U+00AF (decimal 175) defining Unicode char U+00B0 (decimal 176) defining Unicode char U+00B1 (decimal 177) defining Unicode char U+00B2 (decimal 178) defining Unicode char U+00B3 (decimal 179) defining Unicode char U+00B4 (decimal 180) defining Unicode char U+00B5 (decimal 181) defining Unicode char U+00B6 (decimal 182) defining Unicode char U+00B7 (decimal 183) defining Unicode char U+00B9 (decimal 185) defining Unicode char U+00BA (decimal 186) defining Unicode char U+00BC (decimal 188) defining Unicode char U+00BD (decimal 189) defining Unicode char U+00BE (decimal 190) defining Unicode char U+00D7 (decimal 215) defining Unicode char U+00F7 (decimal 247) defining Unicode char U+0192 (decimal 402) defining Unicode char U+02C7 (decimal 711) defining Unicode char U+02D8 (decimal 728) defining Unicode char U+02DD (decimal 733) defining Unicode char U+0E3F (decimal 3647) defining Unicode char U+2016 (decimal 8214) defining Unicode char U+2020 (decimal 8224) defining Unicode char U+2021 (decimal 8225) defining Unicode char U+2022 (decimal 8226) defining Unicode char U+2030 (decimal 8240) defining Unicode char U+2031 (decimal 8241) defining Unicode char U+203B (decimal 8251) defining Unicode char U+203D (decimal 8253) defining Unicode char U+2044 (decimal 8260) defining Unicode char U+204E (decimal 8270) defining Unicode char U+2052 (decimal 8274) defining Unicode char U+20A1 (decimal 8353) defining Unicode char U+20A4 (decimal 8356) defining Unicode char U+20A6 (decimal 8358) defining Unicode char U+20A9 (decimal 8361) defining Unicode char U+20AB (decimal 8363) defining Unicode char U+20AC (decimal 8364) defining Unicode char U+20B1 (decimal 8369) defining Unicode char U+2103 (decimal 8451) defining Unicode char U+2116 (decimal 8470) defining Unicode char U+2117 (decimal 8471) defining Unicode char U+211E (decimal 8478) defining Unicode char U+2120 (decimal 8480) defining Unicode char U+2122 (decimal 8482) defining Unicode char U+2126 (decimal 8486) defining Unicode char U+2127 (decimal 8487) defining Unicode char U+212E (decimal 8494) defining Unicode char U+2190 (decimal 8592) defining Unicode char U+2191 (decimal 8593) defining Unicode char U+2192 (decimal 8594) defining Unicode char U+2193 (decimal 8595) defining Unicode char U+2329 (decimal 9001) defining Unicode char U+232A (decimal 9002) defining Unicode char U+2422 (decimal 9250) defining Unicode char U+25E6 (decimal 9702) defining Unicode char U+25EF (decimal 9711) defining Unicode char U+266A (decimal 9834) ) Now handling font encoding PD1 ... ... no UTF-8 mapping file for font encoding PD1 Now handling font encoding PU ... ... no UTF-8 mapping file for font encoding PU defining Unicode char U+00A9 (decimal 169) defining Unicode char U+00AA (decimal 170) defining Unicode char U+00AE (decimal 174) defining Unicode char U+00BA (decimal 186) defining Unicode char U+02C6 (decimal 710) defining Unicode char U+02DC (decimal 732) defining Unicode char U+200C (decimal 8204) defining Unicode char U+2026 (decimal 8230) defining Unicode char U+2122 (decimal 8482) defining Unicode char U+2423 (decimal 9251) )) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/mathptmx.sty Package: mathptmx 2005/04/12 PSNFSS-v9.2a Times w/ Math, improved (SPQR, WaS) LaTeX Font Info: Redeclaring symbol font `operators' on input line 28. LaTeX Font Info: Overwriting symbol font `operators' in version `normal' (Font) OT1/cmr/m/n --> OT1/ztmcm/m/n on input line 28. LaTeX Font Info: Overwriting symbol font `operators' in version `bold' (Font) OT1/cmr/bx/n --> OT1/ztmcm/m/n on input line 28. LaTeX Font Info: Redeclaring symbol font `letters' on input line 29. LaTeX Font Info: Overwriting symbol font `letters' in version `normal' (Font) OML/cmm/m/it --> OML/ztmcm/m/it on input line 29. LaTeX Font Info: Overwriting symbol font `letters' in version `bold' (Font) OML/cmm/b/it --> OML/ztmcm/m/it on input line 29. LaTeX Font Info: Redeclaring symbol font `symbols' on input line 30. LaTeX Font Info: Overwriting symbol font `symbols' in version `normal' (Font) OMS/cmsy/m/n --> OMS/ztmcm/m/n on input line 30. LaTeX Font Info: Overwriting symbol font `symbols' in version `bold' (Font) OMS/cmsy/b/n --> OMS/ztmcm/m/n on input line 30. LaTeX Font Info: Redeclaring symbol font `largesymbols' on input line 31. LaTeX Font Info: Overwriting symbol font `largesymbols' in version `normal' (Font) OMX/cmex/m/n --> OMX/ztmcm/m/n on input line 31. LaTeX Font Info: Overwriting symbol font `largesymbols' in version `bold' (Font) OMX/cmex/m/n --> OMX/ztmcm/m/n on input line 31. \symbold=\mathgroup4 \symitalic=\mathgroup5 LaTeX Font Info: Redeclaring math alphabet \mathbf on input line 34. LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal' (Font) OT1/cmr/bx/n --> OT1/ptm/bx/n on input line 34. LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `bold' (Font) OT1/cmr/bx/n --> OT1/ptm/bx/n on input line 34. LaTeX Font Info: Redeclaring math alphabet \mathit on input line 35. LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal' (Font) OT1/cmr/m/it --> OT1/ptm/m/it on input line 35. LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold' (Font) OT1/cmr/bx/it --> OT1/ptm/m/it on input line 35. LaTeX Info: Redefining \hbar on input line 50. ) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/helvet.sty Package: helvet 2005/04/12 PSNFSS-v9.2a (WaS) ) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/courier.sty Package: courier 2005/04/12 PSNFSS-v9.2a (WaS) ) (/usr/share/texlive/texmf-dist/tex/latex/sectsty/sectsty.sty Package: sectsty 2002/02/25 v2.0.2 Commands to change all sectional heading sty les ) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty Package: amssymb 2013/01/14 v3.01 AMS font symbols (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty Package: amsfonts 2013/01/14 v3.01 Basic AMSFonts support \@emptytoks=\toks23 \symAMSa=\mathgroup6 \symAMSb=\mathgroup7 LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold' (Font) U/euf/m/n --> U/euf/b/n on input line 106. )) (/usr/share/texlive/texmf-dist/tex/latex/tocloft/tocloft.sty Package: tocloft 2013/05/02 v2.3f parameterised ToC, etc., typesetting Package tocloft Info: The document has chapter divisions on input line 44. \cftparskip=\skip51 \cftbeforetoctitleskip=\skip52 \cftaftertoctitleskip=\skip53 \cftbeforepartskip=\skip54 \cftpartnumwidth=\skip55 \cftpartindent=\skip56 \cftbeforechapskip=\skip57 \cftchapindent=\skip58 \cftchapnumwidth=\skip59 \cftbeforesecskip=\skip60 \cftsecindent=\skip61 \cftsecnumwidth=\skip62 \cftbeforesubsecskip=\skip63 \cftsubsecindent=\skip64 \cftsubsecnumwidth=\skip65 \cftbeforesubsubsecskip=\skip66 \cftsubsubsecindent=\skip67 \cftsubsubsecnumwidth=\skip68 \cftbeforeparaskip=\skip69 \cftparaindent=\skip70 \cftparanumwidth=\skip71 \cftbeforesubparaskip=\skip72 \cftsubparaindent=\skip73 \cftsubparanumwidth=\skip74 \cftbeforeloftitleskip=\skip75 \cftafterloftitleskip=\skip76 \cftbeforefigskip=\skip77 \cftfigindent=\skip78 \cftfignumwidth=\skip79 \c@lofdepth=\count122 \c@lotdepth=\count123 \cftbeforelottitleskip=\skip80 \cftafterlottitleskip=\skip81 \cftbeforetabskip=\skip82 \cfttabindent=\skip83 \cfttabnumwidth=\skip84 ) (./doxygen.sty Package: doxygen (/usr/share/texlive/texmf-dist/tex/latex/tools/calc.sty Package: calc 2007/08/22 v4.3 Infix arithmetic (KKT,FJ) \calc@Acount=\count124 \calc@Bcount=\count125 \calc@Adimen=\dimen131 \calc@Bdimen=\dimen132 \calc@Askip=\skip85 \calc@Bskip=\skip86 LaTeX Info: Redefining \setlength on input line 76. LaTeX Info: Redefining \addtolength on input line 77. \calc@Ccount=\count126 \calc@Cskip=\skip87 ) (/usr/share/texlive/texmf-dist/tex/latex/tools/verbatim.sty Package: verbatim 2003/08/22 v1.5q LaTeX2e package for verbatim enhancements \every@verbatim=\toks24 \verbatim@line=\toks25 \verbatim@in@stream=\read1 ) (/usr/share/texlive/texmf-dist/tex/latex/xtab/xtab.sty Package: xtab 2011/07/31 v2.3f Extended supertabular package \c@tracingst=\count127 \PWSTcapht=\dimen133 \ST@wd=\dimen134 \ST@rightskip=\skip88 \ST@leftskip=\skip89 \ST@parfillskip=\skip90 \c@PWSTtable=\count128 \PWSTlastpage=\count129 \PWSTpenultimate=\count130 \PWSTcurpage=\count131 \PWSTtempc=\count132 \PWSTlines=\count133 \PWST@lastht=\dimen135 \PWST@generalht=\dimen136 \PWST@ht=\dimen137 \ST@pageleft=\dimen138 \ST@headht=\dimen139 \ST@tailht=\dimen140 \ST@pagesofar=\dimen141 \ST@pboxht=\dimen142 \ST@lineht=\dimen143 \ST@stretchht=\dimen144 \ST@prevht=\dimen145 \ST@toadd=\dimen146 \ST@dimen=\dimen147 \ST@pbox=\box56 ) \xrefbox=\box57 \xreflength=\skip91 \tmplength=\skip92 ) (/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty File: lstlang1.sty 2013/08/26 1.5b listings language file ) (/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty File: lstlang1.sty 2013/08/26 1.5b listings language file ) (/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty File: lstmisc.sty 2013/08/26 1.5b (Carsten Heinz) ) \@indexfile=\write3 \openout3 = `refman.idx'. Writing index file refman.idx ! LaTeX Error: \footrulewidth undefined. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.43 \renewcommand{\footrulewidth} {0.4pt} ? No file refman.aux. \openout1 = `refman.aux'. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for TS1/cmr/m/n on input line 49. LaTeX Font Info: Try loading font information for TS1+cmr on input line 49. (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd File: ts1cmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions ) LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for PD1/pdf/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Checking defaults for PU/pdf/m/n on input line 49. LaTeX Font Info: ... okay on input line 49. LaTeX Font Info: Try loading font information for OT1+phv on input line 49. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ot1phv.fd File: ot1phv.fd 2001/06/04 scalable font definitions for OT1/phv. ) LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 8.99994pt on input line 49. *geometry* driver: auto-detecting *geometry* detected driver: pdftex *geometry* verbose mode - [ preamble ] result: * driver: pdftex * paper: a4paper * layout: * layoutoffset:(h,v)=(0.0pt,0.0pt) * modes: twoside * h-part:(L,W,R)=(71.13188pt, 455.24411pt, 71.13188pt) * v-part:(T,H,B)=(71.13188pt, 702.78308pt, 71.13188pt) * \paperwidth=597.50787pt * \paperheight=845.04684pt * \textwidth=455.24411pt * \textheight=702.78308pt * \oddsidemargin=-1.1381pt * \evensidemargin=-1.1381pt * \topmargin=-31.2056pt * \headheight=12.0pt * \headsep=18.06749pt * \topskip=10.0pt * \footskip=25.29494pt * \marginparwidth=125.0pt * \marginparsep=7.0pt * \columnsep=10.0pt * \skip\footins=9.0pt plus 4.0pt minus 2.0pt * \hoffset=0.0pt * \voffset=0.0pt * \mag=1000 * \@twocolumnfalse * \@twosidetrue * \@mparswitchtrue * \@reversemarginfalse * (1in=72.27pt=25.4mm, 1cm=28.453pt) (/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] \scratchcounter=\count134 \scratchdimen=\dimen148 \scratchbox=\box58 \nofMPsegments=\count135 \nofMParguments=\count136 \everyMPshowfont=\toks26 \MPscratchCnt=\count137 \MPscratchDim=\dimen149 \MPnumerator=\count138 \makeMPintoPDFobject=\count139 \everyMPtoPDFconversion=\toks27 ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty Package: epstopdf-base 2010/02/09 v2.5 Base part for package epstopdf (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty Package: grfext 2010/08/19 v1.1 Manage graphics extensions (HO) ) Package grfext Info: Graphics extension search list: (grfext) [.png,.pdf,.jpg,.mps,.jpeg,.jbig2,.jb2,.PNG,.PDF,.JPG,.JPE G,.JBIG2,.JB2,.eps] (grfext) \AppendGraphicsExtensions on input line 452. (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Liv e )) \c@lstlisting=\count140 \AtBeginShipoutBox=\box59 Package backref Info: ** backref set up for natbib ** on input line 49. Package hyperref Info: Link coloring ON on input line 49. (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty Package: nameref 2012/10/27 v2.43 Cross-referencing by name of section (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty Package: gettitlestring 2010/12/03 v1.4 Cleanup title references (HO) ) \c@section@level=\count141 ) LaTeX Info: Redefining \ref on input line 49. LaTeX Info: Redefining \pageref on input line 49. LaTeX Info: Redefining \nameref on input line 49. \@outlinefile=\write4 \openout4 = `refman.out'. \big@size=\dimen150 Package hyperref Info: Option `pageanchor' set `false' on input line 50. LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 12.9599pt on input line 54. LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 10.79993pt on input line 56. LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 8.09995pt on input line 58. [1 {/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] ! Undefined control sequence. l.61 \clearemptydoublepage ? LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 22.39185pt on input line 63. LaTeX Font Info: Font shape `OT1/phv/bx/n' in size <24.88> not available (Font) Font shape `OT1/phv/b/n' tried instead on input line 63. LaTeX Font Info: Font shape `OT1/phv/b/n' will be (Font) scaled to size 22.39185pt on input line 63. \tf@toc=\write5 \openout5 = `refman.toc'. ! Undefined control sequence. l.64 \clearemptydoublepage ? Package hyperref Info: Option `pageanchor' set `true' on input line 66. [1 ] LaTeX Font Info: Font shape `OT1/phv/m/sl' will be (Font) scaled to size 8.99994pt on input line 68. [2 ] Chapter 1. LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 18.66588pt on input line 68. LaTeX Font Info: Font shape `OT1/phv/bx/n' in size <20.74> not available (Font) Font shape `OT1/phv/b/n' tried instead on input line 68. LaTeX Font Info: Font shape `OT1/phv/b/n' will be (Font) scaled to size 18.66588pt on input line 68. (./namespaces.tex LaTeX Font Info: Font shape `OT1/phv/bx/n' in size <14.4> not available (Font) Font shape `OT1/phv/b/n' tried instead on input line 1. LaTeX Font Info: Font shape `OT1/phv/b/n' will be (Font) scaled to size 12.9599pt on input line 1. LaTeX Font Info: Try loading font information for OT1+ztmcm on input line 3. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ot1ztmcm.fd File: ot1ztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OT1/ztmcm. ) LaTeX Font Info: Try loading font information for OML+ztmcm on input line 3. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/omlztmcm.fd File: omlztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OML/ztmcm. ) LaTeX Font Info: Try loading font information for OMS+ztmcm on input line 3. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/omsztmcm.fd File: omsztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMS/ztmcm. ) LaTeX Font Info: Try loading font information for OMX+ztmcm on input line 3. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/omxztmcm.fd File: omxztmcm.fd 2000/01/03 Fontinst v1.801 font definitions for OMX/ztmcm. ) LaTeX Font Info: Try loading font information for OT1+ptm on input line 3. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ot1ptm.fd File: ot1ptm.fd 2001/06/04 font definitions for OT1/ptm. ) LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <10> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 3. LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <7.4> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 3. LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <6> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 3. LaTeX Font Info: Font shape `OT1/phv/bx/n' in size <10> not available (Font) Font shape `OT1/phv/b/n' tried instead on input line 3. LaTeX Font Info: Font shape `OT1/phv/b/n' will be (Font) scaled to size 8.99994pt on input line 3. LaTeX Warning: Reference `namespacemeow' on page 3 undefined on input line 3. ) [3] [4 ] Chapter 2. (./hierarchy.tex LaTeX Warning: Reference `classmeow_1_1BinaryIndexTree' on page 5 undefined on input line 3. LaTeX Warning: Reference `classmeow_1_1Color3__Space' on page 5 undefined on in put line 4. LaTeX Warning: Reference `classmeow_1_1Color3__Space' on page 5 undefined on in put line 5. LaTeX Warning: Reference `classmeow_1_1HSLf__Space' on page 5 undefined on inpu t line 7. LaTeX Warning: Reference `classmeow_1_1HSVf__Space' on page 5 undefined on inpu t line 8. LaTeX Warning: Reference `classmeow_1_1RGBf__Space' on page 5 undefined on inpu t line 9. LaTeX Warning: Reference `classmeow_1_1YUVf__Space' on page 5 undefined on inpu t line 10. LaTeX Warning: Reference `classmeow_1_1Color3__Space' on page 5 undefined on in put line 12. LaTeX Warning: Reference `classmeow_1_1RGBi__Space' on page 5 undefined on inpu t line 14. LaTeX Warning: Reference `classmeow_1_1DisjointSet' on page 5 undefined on inpu t line 16. LaTeX Warning: Reference `classmeow_1_1SplayTree__Range_1_1Element' on page 5 u ndefined on input line 17. LaTeX Warning: Reference `classmeow_1_1SplayTree_1_1Element' on page 5 undefine d on input line 18. LaTeX Warning: Reference `classmeow_1_1HashTableList' on page 5 undefined on in put line 19. LaTeX Warning: Reference `classmeow_1_1HSL' on page 5 undefined on input line 2 0. LaTeX Warning: Reference `classmeow_1_1HSL' on page 5 undefined on input line 2 1. LaTeX Warning: Reference `classmeow_1_1HSLf' on page 5 undefined on input line 23. LaTeX Warning: Reference `classmeow_1_1HSV' on page 5 undefined on input line 2 5. LaTeX Warning: Reference `classmeow_1_1HSV' on page 5 undefined on input line 2 6. LaTeX Warning: Reference `classmeow_1_1HSVf' on page 5 undefined on input line 28. LaTeX Warning: Reference `classmeow_1_1ImplementInterface' on page 5 undefined on input line 30. LaTeX Warning: Reference `classmeow_1_1KD__Tree' on page 5 undefined on input l ine 31. LaTeX Warning: Reference `classmeow_1_1Matrix' on page 5 undefined on input lin e 32. LaTeX Warning: Reference `classmeow_1_1Matrix' on page 5 undefined on input lin e 33. LaTeX Warning: Reference `classmeow_1_1Matrix' on page 5 undefined on input lin e 34. LaTeX Warning: Reference `classmeow_1_1Matrix' on page 5 undefined on input lin e 35. LaTeX Warning: Reference `classmeow_1_1Matrix' on page 5 undefined on input lin e 36. LaTeX Warning: Reference `classmeow_1_1MergeableHeap' on page 5 undefined on in put line 37. LaTeX Warning: Reference `classmeow_1_1ObjBase' on page 5 undefined on input li ne 38. LaTeX Warning: Reference `classmeow_1_1IdentityPoints' on page 5 undefined on i nput line 40. LaTeX Warning: Reference `classmeow_1_1Bitmap' on page 5 undefined on input lin e 41. LaTeX Warning: Reference `classmeow_1_1BundleAdjustment' on page 5 undefined on input line 42. LaTeX Warning: Reference `classmeow_1_1BundleAdjustment__LM' on page 5 undefine d on input line 44. LaTeX Warning: Reference `classmeow_1_1Camera' on page 5 undefined on input lin e 46. LaTeX Warning: Reference `classmeow_1_1Eye' on page 5 undefined on input line 4 7. LaTeX Warning: Reference `classmeow_1_1FeaturePoint' on page 5 undefined on inp ut line 48. LaTeX Warning: Reference `classmeow_1_1FeaturePointsDetector' on page 5 undefin ed on input line 49. LaTeX Warning: Reference `classmeow_1_1FeaturePointsDetector__Harris' on page 5 undefined on input line 51. LaTeX Warning: Reference `classmeow_1_1FeaturePointsMatch' on page 5 undefined on input line 53. LaTeX Warning: Reference `classmeow_1_1FeaturePointsMatch__K__Match' on page 5 undefined on input line 55. LaTeX Warning: Reference `classmeow_1_1IdentityPoints' on page 5 undefined on i nput line 57. [5] LaTeX Warning: Reference `classmeow_1_1ObjArray' on page 6 undefined on input l ine 58. LaTeX Warning: Reference `classmeow_1_1ObjDictionary' on page 6 undefined on in put line 59. LaTeX Warning: Reference `classmeow_1_1ObjProperties' on page 6 undefined on in put line 60. LaTeX Warning: Reference `classmeow_1_1ObjType' on page 6 undefined on input li ne 61. LaTeX Warning: Reference `classmeow_1_1Photo' on page 6 undefined on input line 62. LaTeX Warning: Reference `classmeow_1_1ViewPort' on page 6 undefined on input l ine 63. LaTeX Warning: Reference `classmeow_1_1WatchBall' on page 6 undefined on input line 64. LaTeX Warning: Reference `classmeow_1_1ObjSelector' on page 6 undefined on inpu t line 66. LaTeX Warning: Reference `structmeow_1_1PairToPair' on page 6 undefined on inpu t line 67. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__double' on page 6 undefine d on input line 68. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__int' on page 6 undefined o n input line 69. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__size__t' on page 6 undefin ed on input line 70. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__string' on page 6 undefine d on input line 71. LaTeX Warning: Reference `classmeow_1_1RegisterInterface' on page 6 undefined o n input line 72. LaTeX Warning: Reference `classmeow_1_1RGB' on page 6 undefined on input line 7 3. LaTeX Warning: Reference `classmeow_1_1RGB' on page 6 undefined on input line 7 4. LaTeX Warning: Reference `classmeow_1_1RGBf' on page 6 undefined on input line 76. LaTeX Warning: Reference `classmeow_1_1RGB' on page 6 undefined on input line 7 8. LaTeX Warning: Reference `classmeow_1_1RGBi' on page 6 undefined on input line 80. LaTeX Warning: Reference `structmeow_1_1SceneInfo' on page 6 undefined on input line 82. LaTeX Warning: Reference `classmeow_1_1SegmentTree' on page 6 undefined on inpu t line 83. LaTeX Warning: Reference `classmeow_1_1Self' on page 6 undefined on input line 84. LaTeX Warning: Reference `classmeow_1_1Self' on page 6 undefined on input line 85. LaTeX Warning: Reference `classmeow_1_1Self' on page 6 undefined on input line 86. LaTeX Warning: Reference `classmeow_1_1SplayTree' on page 6 undefined on input line 87. LaTeX Warning: Reference `classmeow_1_1SplayTree__Range' on page 6 undefined on input line 88. LaTeX Warning: Reference `classmeow_1_1Transformation' on page 6 undefined on i nput line 89. LaTeX Warning: Reference `classmeow_1_1BallProjection' on page 6 undefined on i nput line 91. LaTeX Warning: Reference `classmeow_1_1LinearTransformation' on page 6 undefine d on input line 92. LaTeX Warning: Reference `classmeow_1_1Rotation3D' on page 6 undefined on input line 94. LaTeX Warning: Reference `classmeow_1_1PhotoProjection' on page 6 undefined on input line 96. LaTeX Warning: Reference `classmeow_1_1Transformation' on page 6 undefined on i nput line 98. LaTeX Warning: Reference `classmeow_1_1BallProjection' on page 6 undefined on i nput line 100. LaTeX Warning: Reference `classmeow_1_1LinearTransformation' on page 6 undefine d on input line 101. LaTeX Warning: Reference `classmeow_1_1Rotation3D' on page 6 undefined on input line 103. LaTeX Warning: Reference `classmeow_1_1PhotoProjection' on page 6 undefined on input line 105. LaTeX Warning: Reference `classmeow_1_1Usage' on page 6 undefined on input line 107. LaTeX Warning: Reference `classmeow_1_1Vector' on page 6 undefined on input lin e 108. LaTeX Warning: Reference `classmeow_1_1Vector2D' on page 6 undefined on input l ine 109. LaTeX Warning: Reference `classmeow_1_1Vector2D' on page 6 undefined on input l ine 110. LaTeX Warning: Reference `classmeow_1_1Vector3D' on page 6 undefined on input l ine 111. LaTeX Warning: Reference `classmeow_1_1Vector3D' on page 6 undefined on input l ine 112. LaTeX Warning: Reference `classmeow_1_1Vector3D' on page 6 undefined on input l ine 113. LaTeX Warning: Reference `classmeow_1_1Vector3D' on page 6 undefined on input l ine 114. LaTeX Warning: Reference `classmeow_1_1Vector' on page 6 undefined on input lin e 115. LaTeX Warning: Reference `classmeow_1_1VP__Tree' on page 6 undefined on input l ine 116. LaTeX Warning: Reference `classmeow_1_1YUV' on page 6 undefined on input line 1 17. LaTeX Warning: Reference `classmeow_1_1YUV' on page 6 undefined on input line 1 18. LaTeX Warning: Reference `classmeow_1_1YUVf' on page 6 undefined on input line 120. LaTeX Warning: Reference `classdouble' on page 6 undefined on input line 122. LaTeX Warning: Reference `classint' on page 6 undefined on input line 123. LaTeX Warning: Reference `classint32__t' on page 6 undefined on input line 124. ) [6] Chapter 3. (./annotated.tex LaTeX Warning: Reference `classmeow_1_1BallProjection' on page 7 undefined on i nput line 3. ! Package inputenc Error: Unicode char \u8:極 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:簡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? LaTeX Font Info: Try loading font information for OT1+pcr on input line 4. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ot1pcr.fd File: ot1pcr.fd 2001/06/04 font definitions for OT1/pcr. ) ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:更 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.4 ...}{\pageref{classmeow_1_1BinaryIndexTree}}{} ? LaTeX Warning: Reference `classmeow_1_1BinaryIndexTree' on page 7 undefined on input line 4. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.5 ...資料 }{\pageref{classmeow_1_1Bitmap}}{} ? ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.5 ...資料 }{\pageref{classmeow_1_1Bitmap}}{} ? ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.5 ...資料 }{\pageref{classmeow_1_1Bitmap}}{} ? ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.5 ...資料 }{\pageref{classmeow_1_1Bitmap}}{} ? ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.5 ...資料 }{\pageref{classmeow_1_1Bitmap}}{} ? ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.5 ...資料 }{\pageref{classmeow_1_1Bitmap}}{} ? LaTeX Warning: Reference `classmeow_1_1Bitmap' on page 7 undefined on input lin e 5. Underfull \hbox (badness 10000) in paragraph at lines 5--5 [] [] LaTeX Warning: Reference `classmeow_1_1BundleAdjustment' on page 7 undefined on input line 6. LaTeX Warning: Reference `classmeow_1_1BundleAdjustment__LM' on page 7 undefine d on input line 7. LaTeX Warning: Reference `classmeow_1_1Camera' on page 7 undefined on input lin e 8. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ... }{\pageref{classmeow_1_1Color3__Space}}{} ? LaTeX Warning: Reference `classmeow_1_1Color3__Space' on page 7 undefined on in put line 9. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:互 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:斥 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... }{\pageref{classmeow_1_1DisjointSet}}{} ? LaTeX Warning: Reference `classmeow_1_1DisjointSet' on page 7 undefined on inpu t line 10. Underfull \hbox (badness 10000) in paragraph at lines 10--10 [] [] ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...assmeow_1_1SplayTree__Range_1_1Element}}{} ? LaTeX Warning: Reference `classmeow_1_1SplayTree__Range_1_1Element' on page 7 u ndefined on input line 11. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eref{classmeow_1_1SplayTree_1_1Element}}{} ? LaTeX Warning: Reference `classmeow_1_1SplayTree_1_1Element' on page 7 undefine d on input line 12. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...sformation }{\pageref{classmeow_1_1Eye}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...sformation }{\pageref{classmeow_1_1Eye}}{} ? ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...sformation }{\pageref{classmeow_1_1Eye}}{} ? ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...sformation }{\pageref{classmeow_1_1Eye}}{} ? ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...sformation }{\pageref{classmeow_1_1Eye}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...sformation }{\pageref{classmeow_1_1Eye}}{} ? LaTeX Warning: Reference `classmeow_1_1Eye' on page 7 undefined on input line 1 3. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ... }{\pageref{classmeow_1_1FeaturePoint}}{} ? ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ... }{\pageref{classmeow_1_1FeaturePoint}}{} ? ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ... }{\pageref{classmeow_1_1FeaturePoint}}{} ? LaTeX Warning: Reference `classmeow_1_1FeaturePoint' on page 7 undefined on inp ut line 14. Underfull \hbox (badness 10000) in paragraph at lines 14--14 [] [] LaTeX Warning: Reference `classmeow_1_1FeaturePointsDetector' on page 7 undefin ed on input line 15. LaTeX Warning: Reference `classmeow_1_1FeaturePointsDetector__Harris' on page 7 undefined on input line 16. LaTeX Warning: Reference `classmeow_1_1FeaturePointsMatch' on page 7 undefined on input line 17. LaTeX Warning: Reference `classmeow_1_1FeaturePointsMatch__K__Match' on page 7 undefined on input line 18. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:撞 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... }{\pageref{classmeow_1_1HashTableList}}{} ? LaTeX Warning: Reference `classmeow_1_1HashTableList' on page 7 undefined on in put line 19. LaTeX Warning: Reference `classmeow_1_1HSL' on page 7 undefined on input line 2 0. LaTeX Warning: Reference `classmeow_1_1HSLf' on page 7 undefined on input line 21. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... }{\pageref{classmeow_1_1HSLf__Space}}{} ? LaTeX Warning: Reference `classmeow_1_1HSLf__Space' on page 7 undefined on inpu t line 22. LaTeX Warning: Reference `classmeow_1_1HSV' on page 7 undefined on input line 2 3. LaTeX Warning: Reference `classmeow_1_1HSVf' on page 7 undefined on input line 24. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... }{\pageref{classmeow_1_1HSVf__Space}}{} ? LaTeX Warning: Reference `classmeow_1_1HSVf__Space' on page 7 undefined on inpu t line 25. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...}{\pageref{classmeow_1_1IdentityPoints}}{} ? ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...}{\pageref{classmeow_1_1IdentityPoints}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...}{\pageref{classmeow_1_1IdentityPoints}}{} ? ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...}{\pageref{classmeow_1_1IdentityPoints}}{} ? ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...}{\pageref{classmeow_1_1IdentityPoints}}{} ? ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...}{\pageref{classmeow_1_1IdentityPoints}}{} ? LaTeX Warning: Reference `classmeow_1_1IdentityPoints' on page 7 undefined on i nput line 26. LaTeX Warning: Reference `classmeow_1_1ImplementInterface' on page 7 undefined on input line 27. LaTeX Warning: Reference `classmeow_1_1KD__Tree' on page 7 undefined on input l ine 28. [7 ] LaTeX Warning: Reference `classmeow_1_1LinearTransformation' on page 8 undefine d on input line 29. LaTeX Warning: Reference `classmeow_1_1Matrix' on page 8 undefined on input lin e 30. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:左 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:還 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... }{\pageref{classmeow_1_1MergeableHeap}}{} ? LaTeX Warning: Reference `classmeow_1_1MergeableHeap' on page 8 undefined on in put line 31. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...Base} }{\pageref{classmeow_1_1ObjArray}}{} ? LaTeX Warning: Reference `classmeow_1_1ObjArray' on page 8 undefined on input l ine 32. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:切 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:求 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...功能 }{\pageref{classmeow_1_1ObjBase}}{} ? LaTeX Warning: Reference `classmeow_1_1ObjBase' on page 8 undefined on input li ne 33. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... }{\pageref{classmeow_1_1ObjDictionary}}{} ? LaTeX Warning: Reference `classmeow_1_1ObjDictionary' on page 8 undefined on in put line 34. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... }{\pageref{classmeow_1_1ObjProperties}}{} ? ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... }{\pageref{classmeow_1_1ObjProperties}}{} ? ! Package inputenc Error: Unicode char \u8:擺 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... }{\pageref{classmeow_1_1ObjProperties}}{} ? ! Package inputenc Error: Unicode char \u8:爛 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... }{\pageref{classmeow_1_1ObjProperties}}{} ? ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... }{\pageref{classmeow_1_1ObjProperties}}{} ? LaTeX Warning: Reference `classmeow_1_1ObjProperties' on page 8 undefined on in put line 35. Underfull \hbox (badness 10000) in paragraph at lines 35--35 [] [] ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:概 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:念 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:達 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:擇 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ss }{\pageref{classmeow_1_1ObjSelector}}{} ? LaTeX Warning: Reference `classmeow_1_1ObjSelector' on page 8 undefined on inpu t line 36. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...-Base} }{\pageref{classmeow_1_1ObjType}}{} ? LaTeX Warning: Reference `classmeow_1_1ObjType' on page 8 undefined on input li ne 37. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...nd }{\pageref{structmeow_1_1PairToPair}}{} ? LaTeX Warning: Reference `structmeow_1_1PairToPair' on page 8 undefined on inpu t line 38. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...\*底片 }{\pageref{classmeow_1_1Photo}}{} ? ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...\*底片 }{\pageref{classmeow_1_1Photo}}{} ? LaTeX Warning: Reference `classmeow_1_1Photo' on page 8 undefined on input line 39. Underfull \hbox (badness 10000) in paragraph at lines 39--39 [] [] LaTeX Warning: Reference `classmeow_1_1PhotoProjection' on page 8 undefined on input line 40. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__double' on page 8 undefine d on input line 41. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__int' on page 8 undefined o n input line 42. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__size__t' on page 8 undefin ed on input line 43. LaTeX Warning: Reference `classmeow_1_1ReaderWriter__string' on page 8 undefine d on input line 44. LaTeX Warning: Reference `classmeow_1_1RegisterInterface' on page 8 undefined o n input line 45. LaTeX Warning: Reference `classmeow_1_1RGB' on page 8 undefined on input line 4 6. LaTeX Warning: Reference `classmeow_1_1RGBf' on page 8 undefined on input line 47. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... }{\pageref{classmeow_1_1RGBf__Space}}{} ? LaTeX Warning: Reference `classmeow_1_1RGBf__Space' on page 8 undefined on inpu t line 48. LaTeX Warning: Reference `classmeow_1_1RGBi' on page 8 undefined on input line 49. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:整 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... }{\pageref{classmeow_1_1RGBi__Space}}{} ? LaTeX Warning: Reference `classmeow_1_1RGBi__Space' on page 8 undefined on inpu t line 50. LaTeX Warning: Reference `classmeow_1_1Rotation3D' on page 8 undefined on input line 51. LaTeX Warning: Reference `structmeow_1_1SceneInfo' on page 8 undefined on input line 52. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...} }{\pageref{classmeow_1_1SegmentTree}}{} ? ! Package inputenc Error: Unicode char \u8:文 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...} }{\pageref{classmeow_1_1SegmentTree}}{} ? ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...} }{\pageref{classmeow_1_1SegmentTree}}{} ? ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...} }{\pageref{classmeow_1_1SegmentTree}}{} ? ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...} }{\pageref{classmeow_1_1SegmentTree}}{} ? ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...} }{\pageref{classmeow_1_1SegmentTree}}{} ? LaTeX Warning: Reference `classmeow_1_1SegmentTree' on page 8 undefined on inpu t line 53. Underfull \hbox (badness 10000) in paragraph at lines 53--53 [] [] LaTeX Warning: Reference `classmeow_1_1Self' on page 8 undefined on input line 54. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:神 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:乎 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:技 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:些 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:難 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:速 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:踐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...set} }{\pageref{classmeow_1_1SplayTree}}{} ? LaTeX Warning: Reference `classmeow_1_1SplayTree' on page 8 undefined on input line 55. ! Package inputenc Error: Unicode char \u8:基 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:關 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:請 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? ! Package inputenc Error: Unicode char \u8:見 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\pageref{classmeow_1_1SplayTree__Range}}{} ? LaTeX Warning: Reference `classmeow_1_1SplayTree__Range' on page 8 undefined on input line 56. LaTeX Warning: Reference `classmeow_1_1Transformation' on page 8 undefined on i nput line 57. ! Package inputenc Error: Unicode char \u8:管 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:理 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? c Type to proceed, S to scroll future error messages, R to run without stopping, Q to run quietly, I to insert something, E to edit your file, 1 or ... or 9 to ignore the next 1 to 9 tokens of input, H for help, X to quit. ? ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? ! Package inputenc Error: Unicode char \u8:析 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...gc, argv }{\pageref{classmeow_1_1Usage}}{} ? LaTeX Warning: Reference `classmeow_1_1Usage' on page 8 undefined on input line 58. LaTeX Warning: Reference `classmeow_1_1Vector' on page 8 undefined on input lin e 59. LaTeX Warning: Reference `classmeow_1_1Vector2D' on page 8 undefined on input l ine 60. Underfull \vbox (badness 3758) has occurred while \output is active [] [8] LaTeX Warning: Reference `classmeow_1_1Vector3D' on page 9 undefined on input l ine 61. ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...續 }{\pageref{classmeow_1_1ViewPort}}{} ? c Type to proceed, S to scroll future error messages, R to run without stopping, Q to run quietly, I to insert something, E to edit your file, 1 or ... or 9 to ignore the next 1 to 9 tokens of input, H for help, X to quit. ? r OK, entering \nonstopmode... ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...續 }{\pageref{classmeow_1_1ViewPort}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:待 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...續 }{\pageref{classmeow_1_1ViewPort}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:續 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...續 }{\pageref{classmeow_1_1ViewPort}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Warning: Reference `classmeow_1_1ViewPort' on page 9 undefined on input l ine 62. Underfull \hbox (badness 10000) in paragraph at lines 62--62 [] [] ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...歐 }{\pageref{classmeow_1_1VP__Tree}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:很 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...歐 }{\pageref{classmeow_1_1VP__Tree}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...歐 }{\pageref{classmeow_1_1VP__Tree}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:歐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...歐 }{\pageref{classmeow_1_1VP__Tree}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Warning: Reference `classmeow_1_1VP__Tree' on page 9 undefined on input l ine 63. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tion }{\pageref{classmeow_1_1WatchBall}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tion }{\pageref{classmeow_1_1WatchBall}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tion }{\pageref{classmeow_1_1WatchBall}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tion }{\pageref{classmeow_1_1WatchBall}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tion }{\pageref{classmeow_1_1WatchBall}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tion }{\pageref{classmeow_1_1WatchBall}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Warning: Reference `classmeow_1_1WatchBall' on page 9 undefined on input line 64. LaTeX Warning: Reference `classmeow_1_1YUV' on page 9 undefined on input line 6 5. LaTeX Warning: Reference `classmeow_1_1YUVf' on page 9 undefined on input line 66. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... }{\pageref{classmeow_1_1YUVf__Space}}{} Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Warning: Reference `classmeow_1_1YUVf__Space' on page 9 undefined on inpu t line 67. ) [9] [10 ] Chapter 4. (./files.tex LaTeX Warning: Reference `Self_8h' on page 11 undefined on input line 3. LaTeX Warning: Reference `Usage_8h' on page 11 undefined on input line 4. LaTeX Warning: Reference `Usage_8hpp' on page 11 undefined on input line 5. LaTeX Warning: Reference `utility_8h' on page 11 undefined on input line 6. LaTeX Warning: Reference `utility_8hpp' on page 11 undefined on input line 7. LaTeX Warning: Reference `Color3__Space_8h' on page 11 undefined on input line 8. LaTeX Warning: Reference `HSL_8h' on page 11 undefined on input line 9. LaTeX Warning: Reference `HSL_8hpp' on page 11 undefined on input line 10. LaTeX Warning: Reference `HSL__Space_8h' on page 11 undefined on input line 11. LaTeX Warning: Reference `HSV_8h' on page 11 undefined on input line 12. LaTeX Warning: Reference `HSV_8hpp' on page 11 undefined on input line 13. LaTeX Warning: Reference `HSV__Space_8h' on page 11 undefined on input line 14. LaTeX Warning: Reference `RGB_8h' on page 11 undefined on input line 15. LaTeX Warning: Reference `RGB_8hpp' on page 11 undefined on input line 16. LaTeX Warning: Reference `RGB__Space_8h' on page 11 undefined on input line 17. LaTeX Warning: Reference `YUV_8h' on page 11 undefined on input line 18. LaTeX Warning: Reference `YUV_8hpp' on page 11 undefined on input line 19. LaTeX Warning: Reference `YUV__Space_8h' on page 11 undefined on input line 20. LaTeX Warning: Reference `BinaryIndexTree_8h' on page 11 undefined on input lin e 21. LaTeX Warning: Reference `DisjointSet_8h' on page 11 undefined on input line 22 . LaTeX Warning: Reference `HashTable_8h' on page 11 undefined on input line 23. LaTeX Warning: Reference `KD__Tree_8h' on page 11 undefined on input line 24. LaTeX Warning: Reference `MergeableHeap_8h' on page 11 undefined on input line 25. LaTeX Warning: Reference `SegmentTree_8h' on page 11 undefined on input line 26 . LaTeX Warning: Reference `SplayTree_8h' on page 11 undefined on input line 27. LaTeX Warning: Reference `VP__Tree_8h' on page 11 undefined on input line 28. LaTeX Warning: Reference `Vectors_8h' on page 11 undefined on input line 29. LaTeX Warning: Reference `Bitmap_8h' on page 11 undefined on input line 30. LaTeX Warning: Reference `BundleAdjustment_8h' on page 11 undefined on input li ne 31. LaTeX Warning: Reference `BundleAdjustment__LM_8h' on page 11 undefined on inpu t line 32. LaTeX Warning: Reference `Camera_8h' on page 11 undefined on input line 33. LaTeX Warning: Reference `Eye_8h' on page 11 undefined on input line 34. LaTeX Warning: Reference `FeaturePoint_8h' on page 11 undefined on input line 3 5. LaTeX Warning: Reference `FeaturePointsDetector_8h' on page 11 undefined on inp ut line 36. LaTeX Warning: Reference `FeaturePointsDetector__Harris_8h' on page 11 undefine d on input line 37. LaTeX Warning: Reference `FeaturePointsMatch_8h' on page 11 undefined on input line 38. LaTeX Warning: Reference `FeaturePointsMatch__K__Match_8h' on page 11 undefined on input line 39. LaTeX Warning: Reference `IdentityPoints_8h' on page 11 undefined on input line 40. LaTeX Warning: Reference `Photo_8h' on page 11 undefined on input line 41. LaTeX Warning: Reference `ViewPort_8h' on page 11 undefined on input line 42. LaTeX Warning: Reference `WatchBall_8h' on page 11 undefined on input line 43. [11] LaTeX Warning: Reference `LinearTransformation_8h' on page 12 undefined on inpu t line 44. LaTeX Warning: Reference `LinearTransformations_8h' on page 12 undefined on inp ut line 45. LaTeX Warning: Reference `Matrix_8h' on page 12 undefined on input line 46. LaTeX Warning: Reference `methods_8h' on page 12 undefined on input line 47. LaTeX Warning: Reference `Transformation_8h' on page 12 undefined on input line 48. LaTeX Warning: Reference `Transformations_8h' on page 12 undefined on input lin e 49. LaTeX Warning: Reference `math_2utility_8h' on page 12 undefined on input line 50. LaTeX Warning: Reference `Vector_8h' on page 12 undefined on input line 51. LaTeX Warning: Reference `ObjArray_8h' on page 12 undefined on input line 52. LaTeX Warning: Reference `ObjBase_8h' on page 12 undefined on input line 53. LaTeX Warning: Reference `ObjDictionary_8h' on page 12 undefined on input line 54. LaTeX Warning: Reference `ObjProperties_8h' on page 12 undefined on input line 55. LaTeX Warning: Reference `ObjSelector_8h' on page 12 undefined on input line 56 . LaTeX Warning: Reference `ObjTypes_8h' on page 12 undefined on input line 57. LaTeX Warning: Reference `Register__Implement_8h' on page 12 undefined on input line 58. LaTeX Warning: Reference `Register__Implement_8hpp' on page 12 undefined on inp ut line 59. ) [12] Chapter 5. (./namespacemeow.tex LaTeX Font Info: Font shape `OT1/phv/bx/n' in size <12> not available (Font) Font shape `OT1/phv/b/n' tried instead on input line 4. LaTeX Font Info: Font shape `OT1/phv/b/n' will be (Font) scaled to size 10.79993pt on input line 4. LaTeX Font Info: Try loading font information for TS1+phv on input line 7. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1phv.fd File: ts1phv.fd 2001/06/04 scalable font definitions for TS1/phv. ) LaTeX Font Info: Font shape `TS1/phv/m/n' will be (Font) scaled to size 8.99994pt on input line 7. LaTeX Font Info: Font shape `OT1/phv/m/it' in size <9> not available (Font) Font shape `OT1/phv/m/sl' tried instead on input line 8. LaTeX Font Info: Font shape `OT1/phv/m/sl' will be (Font) scaled to size 8.09995pt on input line 8. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 \begin{DoxyCompactList}\small\item\em 以 三個channel所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 \begin{DoxyCompactList}\small\item\em 以三 個channel所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...in{DoxyCompactList}\small\item\em 以三個 channel所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...pactList}\small\item\em 以三個channel所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...tList}\small\item\em 以三個channel所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...st}\small\item\em 以三個channel所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...\small\item\em 以三個channel所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...all\item\em 以三個channel所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...\item\em 以三個channel所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...em\em 以三個channel所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.8 ...em 以三個channel所組成的色彩空間 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Y}(亮度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Y}(亮度), {\b... Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Font shape `OT1/phv/bx/it' in size <9> not available (Font) Font shape `OT1/phv/b/it' tried instead on input line 14. LaTeX Font Info: Font shape `OT1/phv/b/it' in size <9> not available (Font) Font shape `OT1/phv/b/sl' tried instead on input line 14. LaTeX Font Info: Font shape `OT1/phv/b/sl' will be (Font) scaled to size 8.09995pt on input line 14. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...mall\item\em 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...l\item\em 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...series V}(濃度) 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...ies V}(濃度) 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ... V}(濃度) 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...(濃度) 三個值所組成的色彩空間 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Y}(亮度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Y}(亮度), {\b... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...mall\item\em 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...l\item\em 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...series V}(濃度) 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...ies V}(濃度) 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ... V}(濃度) 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 ...(濃度) 三個值所組成的色彩空間 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 以 整數 {\bfseries Red}, {\bfse... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:整 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 以整 數 {\bfseries Red}, {\bfse... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...n{DoxyCompactList}\small\item\em 以整數 {\bfseries Red}, {\bfseri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...{\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...fseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...ries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...s Green}, {\bfseries Blue} 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...reen}, {\bfseries Blue} 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...n}, {\bfseries Blue} 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ... {\bfseries Blue} 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...bfseries Blue} 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...eries Blue} 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...es Blue} 三個值所組成的色彩空間 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Red}, {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Red}, {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Red}, {\bfse... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Red}, {\bfserie... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...{\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...fseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...ries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...s Green}, {\bfseries Blue} 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...reen}, {\bfseries Blue} 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...n}, {\bfseries Blue} 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ... {\bfseries Blue} 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...bfseries Blue} 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...eries Blue} 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...es Blue} 三個值所組成的色彩空間 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Y}(亮度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Y}(亮度), {\b... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...mall\item\em 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...l\item\em 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...series V}(濃度) 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ies V}(濃度) 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ... V}(濃度) 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...(濃度) 三個值所組成的色彩空間 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:極 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 極 度簡化的 {\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 極度 簡化的 {\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:簡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...n{DoxyCompactList}\small\item\em 極度簡 化的 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...oxyCompactList}\small\item\em 極度簡化 的 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...CompactList}\small\item\em 極度簡化的 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Font shape `OT1/pcr/m/it' in size <9> not available (Font) Font shape `OT1/pcr/m/sl' tried instead on input line 38. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...ssmeow_1_1SegmentTree}{Segment\-Tree}} 已 無區間更新的操作 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...eow_1_1SegmentTree}{Segment\-Tree}} 已無 區間更新的操作 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ..._1_1SegmentTree}{Segment\-Tree}} 已無區 間更新的操作 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...1SegmentTree}{Segment\-Tree}} 已無區間 更新的操作 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:更 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...gmentTree}{Segment\-Tree}} 已無區間更 新的操作 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...ntTree}{Segment\-Tree}} 已無區間更新 的操作 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...ree}{Segment\-Tree}} 已無區間更新的 操作 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...}{Segment\-Tree}} 已無區間更新的操 作 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...egment\-Tree}} 已無區間更新的操作 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 用 來維護一堆互斥集的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 用來 維護一堆互斥集的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...n{DoxyCompactList}\small\item\em 用來維 護一堆互斥集的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...oxyCompactList}\small\item\em 用來維護 一堆互斥集的資訊 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...CompactList}\small\item\em 用來維護一 堆互斥集的資訊 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...pactList}\small\item\em 用來維護一堆 互斥集的資訊 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:互 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tList}\small\item\em 用來維護一堆互 斥集的資訊 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斥 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...st}\small\item\em 用來維護一堆互斥 集的資訊 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\small\item\em 用來維護一堆互斥集 的資訊 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...all\item\em 用來維護一堆互斥集的 資訊 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\item\em 用來維護一堆互斥集的資 訊 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...em\em 用來維護一堆互斥集的資訊 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 一 個當key相撞時會用list... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 一個 當key相撞時會用list... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...n{DoxyCompactList}\small\item\em 一個當 key相撞時會用list解... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...CompactList}\small\item\em 一個當key相 撞時會用list解決的h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:撞 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...pactList}\small\item\em 一個當key相撞 時會用list解決的hash... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...tList}\small\item\em 一個當key相撞時 會用list解決的hash\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...st}\small\item\em 一個當key相撞時會 用list解決的hash\-\_\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...\small\item\em 一個當key相撞時會用 list解決的hash\-\_\-tab... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...item\em 一個當key相撞時會用list解 決的hash\-\_\-table \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...m\em 一個當key相撞時會用list解決 的hash\-\_\-table \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...m 一個當key相撞時會用list解決的 hash\-\_\-table \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 一 個用 {\bfseries 左偏樹} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 一個 用 {\bfseries 左偏樹} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...n{DoxyCompactList}\small\item\em 一個用 {\bfseries 左偏樹} 實... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:左 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...st}\small\item\em 一個用 {\bfseries 左 偏樹} 實作的 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...\small\item\em 一個用 {\bfseries 左偏 樹} 實作的 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...all\item\em 一個用 {\bfseries 左偏樹 } 實作的 {\ttfamily Max... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...tem\em 一個用 {\bfseries 左偏樹} 實 作的 {\ttfamily Maximum-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...\em 一個用 {\bfseries 左偏樹} 實作 的 {\ttfamily Maximum-\/\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ... 一個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-He... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...作的 {\ttfamily Maximum-\/\-Heap} , 除 了原本heap有的功能... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...的 {\ttfamily Maximum-\/\-Heap} , 除了 原本heap有的功能外,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ... {\ttfamily Maximum-\/\-Heap} , 除了原 本heap有的功能外, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...\ttfamily Maximum-\/\-Heap} , 除了原本 heap有的功能外, 還... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ly Maximum-\/\-Heap} , 除了原本heap有 的功能外, 還支援 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...Maximum-\/\-Heap} , 除了原本heap有的 功能外, 還支援 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...imum-\/\-Heap} , 除了原本heap有的功 能外, 還支援 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...m-\/\-Heap} , 除了原本heap有的功能 外, 還支援 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 .../\-Heap} , 除了原本heap有的功能外 , 還支援 {\ttfamily mer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:還 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ap} , 除了原本heap有的功能外, 還 支援 {\ttfamily merge} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ... , 除了原本heap有的功能外, 還支 援 {\ttfamily merge} 功... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...除了原本heap有的功能外, 還支援 {\ttfamily merge} 功能 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...功能外, 還支援 {\ttfamily merge} 功 能 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...能外, 還支援 {\ttfamily merge} 功能 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 中 文名 {\ttfamily 線段樹} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:文 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 中文 名 {\ttfamily 線段樹} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...n{DoxyCompactList}\small\item\em 中文名 {\ttfamily 線段樹} \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...st}\small\item\em 中文名 {\ttfamily 線 段樹} \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...\small\item\em 中文名 {\ttfamily 線段 樹} \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...all\item\em 中文名 {\ttfamily 線段樹 } \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 是 一種神乎其技的資料結... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 是一 種神乎其技的資料結... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...n{DoxyCompactList}\small\item\em 是一種 神乎其技的資料結... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:神 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...oxyCompactList}\small\item\em 是一種神 乎其技的資料結構, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乎 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...CompactList}\small\item\em 是一種神乎 其技的資料結構, 維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...pactList}\small\item\em 是一種神乎其 技的資料結構, 維護... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:技 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...tList}\small\item\em 是一種神乎其技 的資料結構, 維護一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...st}\small\item\em 是一種神乎其技的 資料結構, 維護一堆... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...\small\item\em 是一種神乎其技的資 料結構, 維護一堆 Ke... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...all\item\em 是一種神乎其技的資料 結構, 維護一堆 Key-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...\item\em 是一種神乎其技的資料結 構, 維護一堆 Key-\/$>... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...em\em 是一種神乎其技的資料結構 , 維護一堆 Key-\/$>$Va... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... 是一種神乎其技的資料結構, 維 護一堆 Key-\/$>$Value .... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...一種神乎其技的資料結構, 維護 一堆 Key-\/$>$Value . ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...種神乎其技的資料結構, 維護一 堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並且... Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <9> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 50. LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <7> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 50. LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <5> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 50. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...結構, 維護一堆 Key-\/$>$Value . 並 且支援 一些 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...構, 維護一堆 Key-\/$>$Value . 並且 支援 一些 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ..., 維護一堆 Key-\/$>$Value . 並且支 援 一些 {\ttfamily std\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...維護一堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...一堆 Key-\/$>$Value . 並且支援 一 些 {\ttfamily std\-::map}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:些 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:難 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...支援 一些 {\ttfamily std\-::map} 難 以快速實踐的操作, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...援 一些 {\ttfamily std\-::map} 難以 快速實踐的操作, 如... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... 一些 {\ttfamily std\-::map} 難以快 速實踐的操作, 如 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:速 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...一些 {\ttfamily std\-::map} 難以快速 實踐的操作, 如 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...些 {\ttfamily std\-::map} 難以快速實 踐的操作, 如 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:踐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... {\ttfamily std\-::map} 難以快速實踐 的操作, 如 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...ttfamily std\-::map} 難以快速實踐的 操作, 如 {\ttfamily spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...amily std\-::map} 難以快速實踐的操 作, 如 {\ttfamily split}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...ly std\-::map} 難以快速實踐的操作 , 如 {\ttfamily split} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...d\-::map} 難以快速實踐的操作, 如 {\ttfamily split} , {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:基 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 基 本上跟\-Splay\-Tree一樣, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 基本 上跟\-Splay\-Tree一樣, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...n{DoxyCompactList}\small\item\em 基本上 跟\-Splay\-Tree一樣, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...oxyCompactList}\small\item\em 基本上跟 \-Splay\-Tree一樣, 不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...small\item\em 基本上跟\-Splay\-Tree一 樣, 不過這邊結合線... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...ll\item\em 基本上跟\-Splay\-Tree一樣 , 不過這邊結合線段... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...em\em 基本上跟\-Splay\-Tree一樣, 不 過這邊結合線段樹, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...em 基本上跟\-Splay\-Tree一樣, 不過 這邊結合線段樹, 多... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...基本上跟\-Splay\-Tree一樣, 不過這 邊結合線段樹, 多了... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...本上跟\-Splay\-Tree一樣, 不過這邊 結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...上跟\-Splay\-Tree一樣, 不過這邊結 合線段樹, 多了區間... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...跟\-Splay\-Tree一樣, 不過這邊結合 線段樹, 多了區間操... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...\-Splay\-Tree一樣, 不過這邊結合線 段樹, 多了區間操作... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...play\-Tree一樣, 不過這邊結合線段 樹, 多了區間操作 (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...y\-Tree一樣, 不過這邊結合線段樹 , 多了區間操作 (線... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...ee一樣, 不過這邊結合線段樹, 多 了區間操作 (線段樹... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...樣, 不過這邊結合線段樹, 多了 區間操作 (線段樹相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ..., 不過這邊結合線段樹, 多了區 間操作 (線段樹相關... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ... 不過這邊結合線段樹, 多了區間 操作 (線段樹相關ope... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...過這邊結合線段樹, 多了區間操 作 (線段樹相關operat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...這邊結合線段樹, 多了區間操作 (線段樹相關operator... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...結合線段樹, 多了區間操作 (線 段樹相關operator定義... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...合線段樹, 多了區間操作 (線段 樹相關operator定義請... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...線段樹, 多了區間操作 (線段樹 相關operator定義請見... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...段樹, 多了區間操作 (線段樹相 關operator定義請見 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:關 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...樹, 多了區間操作 (線段樹相關 operator定義請見 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...區間操作 (線段樹相關operator定 義請見 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...間操作 (線段樹相關operator定義 請見 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:請 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...操作 (線段樹相關operator定義請 見 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:見 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...作 (線段樹相關operator定義請見 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. [13 ] ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 跟 \-K\-D\-\_\-\-Tree很像歐 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:很 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...st}\small\item\em 跟\-K\-D\-\_\-\-Tree很 像歐 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...\small\item\em 跟\-K\-D\-\_\-\-Tree很像 歐 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:歐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...all\item\em 跟\-K\-D\-\_\-\-Tree很像歐 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 二 維點陣資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 二維 點陣資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...n{DoxyCompactList}\small\item\em 二維點 陣資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...oxyCompactList}\small\item\em 二維點陣 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...CompactList}\small\item\em 二維點陣資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...pactList}\small\item\em 二維點陣資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 \begin{DoxyCompactList}\small\item\em 一 個 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 \begin{DoxyCompactList}\small\item\em 一個 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...yperlink{classmeow_1_1Camera}{Camera}} 加 上一個offset transforma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...rlink{classmeow_1_1Camera}{Camera}} 加上 一個offset transformatio... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...nk{classmeow_1_1Camera}{Camera}} 加上一 個offset transformation \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...classmeow_1_1Camera}{Camera}} 加上一個 offset transformation \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \begin{DoxyCompactList}\small\item\em 特 徵點 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \begin{DoxyCompactList}\small\item\em 特徵 點 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...n{DoxyCompactList}\small\item\em 特徵點 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 \begin{DoxyCompactList}\small\item\em 把 一個 {\ttfamily std\-::map$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 \begin{DoxyCompactList}\small\item\em 把一 個 {\ttfamily std\-::map$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...n{DoxyCompactList}\small\item\em 把一個 {\ttfamily std\-::map$<$I... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包 起來 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...ap$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起 來 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 \begin{DoxyCompactList}\small\item\em 底 片 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 \begin{DoxyCompactList}\small\item\em 底片 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 \begin{DoxyCompactList}\small\item\em 未 完待續 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 \begin{DoxyCompactList}\small\item\em 未完 待續 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:待 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...n{DoxyCompactList}\small\item\em 未完待 續 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:續 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...oxyCompactList}\small\item\em 未完待續 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...yCompactList}\small\item\em {\bfseries 多 個camera}, 一個offset, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...mpactList}\small\item\em {\bfseries 多個 camera}, 一個offset, 一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...mall\item\em {\bfseries 多個camera}, 一 個offset, 一個rotation ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...l\item\em {\bfseries 多個camera}, 一個 offset, 一個rotation \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries 多個camera}, 一個offset, 一 個rotation \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...series 多個camera}, 一個offset, 一個 rotation \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 \begin{DoxyCompactList}\small\item\em 純 粹把 {\ttfamily std\-::vect... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 \begin{DoxyCompactList}\small\item\em 純粹 把 {\ttfamily std\-::vect... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...{DoxyCompactList}\small\item\em 純粹把 {\ttfamily std\-::vector}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...m 純粹把 {\ttfamily std\-::vector} 包 起來, 變成繼承自 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...粹把 {\ttfamily std\-::vector} 包起 來, 變成繼承自 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...把 {\ttfamily std\-::vector} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ... {\ttfamily std\-::vector} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...ttfamily std\-::vector} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...amily std\-::vector} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...ly std\-::vector} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 ...std\-::vector} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 \begin{DoxyCompactList}\small\item\em 一 切物件的\-Base, 並要求... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:切 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 \begin{DoxyCompactList}\small\item\em 一切 物件的\-Base, 並要求... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...{DoxyCompactList}\small\item\em 一切物 件的\-Base, 並要求每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...xyCompactList}\small\item\em 一切物件 的\-Base, 並要求每個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...ompactList}\small\item\em 一切物件的 \-Base, 並要求每個物... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...\small\item\em 一切物件的\-Base, 並 要求每個物件都要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...all\item\em 一切物件的\-Base, 並要 求每個物件都要有re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:求 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...\item\em 一切物件的\-Base, 並要求 每個物件都要有read,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...em\em 一切物件的\-Base, 並要求每 個物件都要有read, wr... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...em 一切物件的\-Base, 並要求每個 物件都要有read, write... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...一切物件的\-Base, 並要求每個物 件都要有read, write, c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...切物件的\-Base, 並要求每個物件 都要有read, write, crea... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...物件的\-Base, 並要求每個物件都 要有read, write, create,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...件的\-Base, 並要求每個物件都要 有read, write, create, ..... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...的\-Base, 並要求每個物件都要有 read, write, create, ... ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...件都要有read, write, create, ... 等 功能 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...都要有read, write, create, ... 等功 能 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.106 ...要有read, write, create, ... 等功能 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 \begin{DoxyCompactList}\small\item\em 純 粹把 {\ttfamily std\-::map}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 \begin{DoxyCompactList}\small\item\em 純粹 把 {\ttfamily std\-::map}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...{DoxyCompactList}\small\item\em 純粹把 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...m\em 純粹把 {\ttfamily std\-::map} 包 起來, 變成繼承自 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...m 純粹把 {\ttfamily std\-::map} 包起 來, 變成繼承自 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...粹把 {\ttfamily std\-::map} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...把 {\ttfamily std\-::map} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ... {\ttfamily std\-::map} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...ttfamily std\-::map} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...amily std\-::map} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 ...ly std\-::map} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.110 \begin{DoxyCompactList}\small\item\em 目 前擺爛中 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.110 \begin{DoxyCompactList}\small\item\em 目前 擺爛中 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擺 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.110 ...{DoxyCompactList}\small\item\em 目前擺 爛中 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:爛 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.110 ...xyCompactList}\small\item\em 目前擺爛 中 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.110 ...ompactList}\small\item\em 目前擺爛中 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [14] ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 \begin{DoxyCompactList}\small\item\em 利 用register的概念, 達到r... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 \begin{DoxyCompactList}\small\item\em 利用 register的概念, 達到r... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...pactList}\small\item\em 利用register的 概念, 達到runtime用st... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:概 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...tList}\small\item\em 利用register的概 念, 達到runtime用strin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:念 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...st}\small\item\em 利用register的概念 , 達到runtime用string... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:達 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...mall\item\em 利用register的概念, 達 到runtime用string選擇... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...l\item\em 利用register的概念, 達到 runtime用string選擇要n... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...利用register的概念, 達到runtime用 string選擇要new的class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...ister的概念, 達到runtime用string選 擇要new的class \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擇 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...er的概念, 達到runtime用string選擇 要new的class \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ...概念, 達到runtime用string選擇要 new的class \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.112 ..., 達到runtime用string選擇要new的 class \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 \begin{DoxyCompactList}\small\item\em 純 粹把給定的 {\ttfamily Ty... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 \begin{DoxyCompactList}\small\item\em 純粹 把給定的 {\ttfamily Ty... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...{DoxyCompactList}\small\item\em 純粹把 給定的 {\ttfamily Type}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...xyCompactList}\small\item\em 純粹把給 定的 {\ttfamily Type} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...ompactList}\small\item\em 純粹把給定 的 {\ttfamily Type} 包... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...actList}\small\item\em 純粹把給定的 {\ttfamily Type} 包起... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...m 純粹把給定的 {\ttfamily Type} 包 起來, 變成繼承自 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...粹把給定的 {\ttfamily Type} 包起 來, 變成繼承自 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...把給定的 {\ttfamily Type} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...給定的 {\ttfamily Type} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...定的 {\ttfamily Type} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...的 {\ttfamily Type} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ... {\ttfamily Type} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.114 ...ttfamily Type} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:管 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 \begin{DoxyCompactList}\small\item\em 管 理參數設置, 自訂usage ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:理 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 \begin{DoxyCompactList}\small\item\em 管理 參數設置, 自訂usage ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...{DoxyCompactList}\small\item\em 管理參 數設置, 自訂usage doc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...xyCompactList}\small\item\em 管理參數 設置, 自訂usage docume... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...ompactList}\small\item\em 管理參數設 置, 自訂usage document,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...actList}\small\item\em 管理參數設置 , 自訂usage document, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...st}\small\item\em 管理參數設置, 自 訂usage document, 分析a... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...\small\item\em 管理參數設置, 自訂 usage document, 分析argc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...參數設置, 自訂usage document, 分 析argc, argv \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:析 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.130 ...數設置, 自訂usage document, 分析 argc, argv \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.132 \begin{DoxyCompactList}\small\item\em 有 .\-from.\-first, .from.\-seco... Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Try loading font information for OMS+phv on input line 157. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/omsphv.fd File: omsphv.fd ) LaTeX Font Info: Font shape `OMS/phv/m/n' in size <10> not available (Font) Font shape `OMS/cmsy/m/n' tried instead on input line 157. LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 7.19995pt on input line 165. LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <8> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 165. [15] [16] ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 \begin{DoxyCompactList}\small\item\em 如 果abs(輸入的數值) $<$ e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 \begin{DoxyCompactList}\small\item\em 如果 abs(輸入的數值) $<$ e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...yCompactList}\small\item\em 如果abs(輸 入的數值) $<$ eps, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...mpactList}\small\item\em 如果abs(輸入 的數值) $<$ eps, 則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...ctList}\small\item\em 如果abs(輸入的 數值) $<$ eps, 則回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...ist}\small\item\em 如果abs(輸入的數 值) $<$ eps, 則回傳0, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...}\small\item\em 如果abs(輸入的數值 ) $<$ eps, 則回傳0, 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...m 如果abs(輸入的數值) $<$ eps, 則 回傳0, 否則回傳輸... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...果abs(輸入的數值) $<$ eps, 則回 傳0, 否則回傳輸入... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...abs(輸入的數值) $<$ eps, 則回傳 0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...輸入的數值) $<$ eps, 則回傳0, 否 則回傳輸入的數值 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...入的數值) $<$ eps, 則回傳0, 否則 回傳輸入的數值 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...的數值) $<$ eps, 則回傳0, 否則回 傳輸入的數值 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...數值) $<$ eps, 則回傳0, 否則回傳 輸入的數值 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...值) $<$ eps, 則回傳0, 否則回傳輸 入的數值 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...) $<$ eps, 則回傳0, 否則回傳輸入 的數值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...<$ eps, 則回傳0, 否則回傳輸入的 數值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ...eps, 則回傳0, 否則回傳輸入的數 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 ..., 則回傳0, 否則回傳輸入的數值 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 \begin{DoxyCompactList}\small\item\em 只 將 {\ttfamily sigs} 個標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 \begin{DoxyCompactList}\small\item\em 只將 {\ttfamily sigs} 個標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...small\item\em 只將 {\ttfamily sigs} 個 標準差以內的數據... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...ll\item\em 只將 {\ttfamily sigs} 個標 準差以內的數據拿... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...item\em 只將 {\ttfamily sigs} 個標準 差以內的數據拿來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...m\em 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...m 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ... {\ttfamily sigs} 個標準差以內的 數據拿來取平均 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...{\ttfamily sigs} 個標準差以內的數 據拿來取平均 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...tfamily sigs} 個標準差以內的數據 拿來取平均 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...mily sigs} 個標準差以內的數據拿 來取平均 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...y sigs} 個標準差以內的數據拿來 取平均 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...igs} 個標準差以內的數據拿來取 平均 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...} 個標準差以內的數據拿來取平 均 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...標準差以內的數據拿來取平均 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 \begin{DoxyCompactList}\small\item\em 只 將 {\ttfamily sigs} 個標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 \begin{DoxyCompactList}\small\item\em 只將 {\ttfamily sigs} 個標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...small\item\em 只將 {\ttfamily sigs} 個 標準差以內的數據... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...ll\item\em 只將 {\ttfamily sigs} 個標 準差以內的數據拿... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...item\em 只將 {\ttfamily sigs} 個標準 差以內的數據拿來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...m\em 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...m 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ... {\ttfamily sigs} 個標準差以內的 數據拿來取平均, 不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...{\ttfamily sigs} 個標準差以內的數 據拿來取平均, 不過... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...tfamily sigs} 個標準差以內的數據 拿來取平均, 不過這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...mily sigs} 個標準差以內的數據拿 來取平均, 不過這次... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...y sigs} 個標準差以內的數據拿來 取平均, 不過這次用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...igs} 個標準差以內的數據拿來取 平均, 不過這次用 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...} 個標準差以內的數據拿來取平 均, 不過這次用 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...標準差以內的數據拿來取平均 , 不過這次用 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...準差以內的數據拿來取平均, 不 過這次用 {\ttfamily p}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...差以內的數據拿來取平均, 不過 這次用 {\ttfamily p} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...以內的數據拿來取平均, 不過這 次用 {\ttfamily p} 來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...內的數據拿來取平均, 不過這次 用 {\ttfamily p} 來加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...的數據拿來取平均, 不過這次用 {\ttfamily p} 來加權... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...平均, 不過這次用 {\ttfamily p} 來 加權平均 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...均, 不過這次用 {\ttfamily p} 來加 權平均 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:權 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ..., 不過這次用 {\ttfamily p} 來加權 平均 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...過這次用 {\ttfamily p} 來加權平 均 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...這次用 {\ttfamily p} 來加權平均 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 \begin{DoxyCompactList}\small\item\em 就 只是個取絕對值 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 \begin{DoxyCompactList}\small\item\em 就只 是個取絕對值 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 ...{DoxyCompactList}\small\item\em 就只是 個取絕對值 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 ...xyCompactList}\small\item\em 就只是個 取絕對值 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 ...ompactList}\small\item\em 就只是個取 絕對值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:絕 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 ...actList}\small\item\em 就只是個取絕 對值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 ...List}\small\item\em 就只是個取絕對 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.256 ...t}\small\item\em 就只是個取絕對值 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 \begin{DoxyCompactList}\small\item\em 類 似\-C的printf, 不過是將... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 \begin{DoxyCompactList}\small\item\em 類似 \-C的printf, 不過是將... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...xyCompactList}\small\item\em 類似\-C的 printf, 不過是將格式... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...st}\small\item\em 類似\-C的printf, 不 過是將格式化的字... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...\small\item\em 類似\-C的printf, 不過 是將格式化的字串... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...all\item\em 類似\-C的printf, 不過是 將格式化的字串丟... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...\item\em 類似\-C的printf, 不過是將 格式化的字串丟到 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:格 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...em\em 類似\-C的printf, 不過是將格 式化的字串丟到 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...em 類似\-C的printf, 不過是將格式 化的字串丟到 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...類似\-C的printf, 不過是將格式化 的字串丟到 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...似\-C的printf, 不過是將格式化的 字串丟到 {\ttfamily st... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...\-C的printf, 不過是將格式化的字 串丟到 {\ttfamily std\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...的printf, 不過是將格式化的字串 丟到 {\ttfamily std\-::s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...printf, 不過是將格式化的字串丟 到 {\ttfamily std\-::stri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...ntf, 不過是將格式化的字串丟到 {\ttfamily std\-::string}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...串丟到 {\ttfamily std\-::string} 裡 回傳 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...丟到 {\ttfamily std\-::string} 裡回 傳 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 ...到 {\ttfamily std\-::string} 裡回傳 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 \begin{DoxyCompactList}\small\item\em 將 輸入字串中的某個patte... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 \begin{DoxyCompactList}\small\item\em 將輸 入字串中的某個patte... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...{DoxyCompactList}\small\item\em 將輸入 字串中的某個pattern... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...xyCompactList}\small\item\em 將輸入字 串中的某個pattern取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...ompactList}\small\item\em 將輸入字串 中的某個pattern取代... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...actList}\small\item\em 將輸入字串中 的某個pattern取代成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...List}\small\item\em 將輸入字串中的 某個pattern取代成另... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...t}\small\item\em 將輸入字串中的某 個pattern取代成另一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...small\item\em 將輸入字串中的某個 pattern取代成另一個p... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...\em 將輸入字串中的某個pattern取 代成另一個pattern \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ... 將輸入字串中的某個pattern取代 成另一個pattern \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...輸入字串中的某個pattern取代成 另一個pattern \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...入字串中的某個pattern取代成另 一個pattern \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...字串中的某個pattern取代成另一 個pattern \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.260 ...串中的某個pattern取代成另一個 pattern \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 \begin{DoxyCompactList}\small\item\em 檢 查給定字串的結尾是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 \begin{DoxyCompactList}\small\item\em 檢查 給定字串的結尾是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...{DoxyCompactList}\small\item\em 檢查給 定字串的結尾是否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...xyCompactList}\small\item\em 檢查給定 字串的結尾是否符... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...ompactList}\small\item\em 檢查給定字 串的結尾是否符合... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...actList}\small\item\em 檢查給定字串 的結尾是否符合給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...List}\small\item\em 檢查給定字串的 結尾是否符合給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...t}\small\item\em 檢查給定字串的結 尾是否符合給定的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...small\item\em 檢查給定字串的結尾 是否符合給定的數... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...ll\item\em 檢查給定字串的結尾是 否符合給定的數個pa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...item\em 檢查給定字串的結尾是否 符合給定的數個patte... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...m\em 檢查給定字串的結尾是否符 合給定的數個patterns... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...m 檢查給定字串的結尾是否符合 給定的數個patterns中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...查給定字串的結尾是否符合給 定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...給定字串的結尾是否符合給定 的數個patterns中的一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...定字串的結尾是否符合給定的 數個patterns中的一個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...字串的結尾是否符合給定的數 個patterns中的一個 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...串的結尾是否符合給定的數個 patterns中的一個 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...尾是否符合給定的數個patterns中 的一個 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...是否符合給定的數個patterns中的 一個 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...否符合給定的數個patterns中的一 個 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.262 ...符合給定的數個patterns中的一個 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:階 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 \begin{DoxyCompactList}\small\item\em 階 層式輸出 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:層 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 \begin{DoxyCompactList}\small\item\em 階層 式輸出 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 ...{DoxyCompactList}\small\item\em 階層式 輸出 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 ...xyCompactList}\small\item\em 階層式輸 出 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 ...ompactList}\small\item\em 階層式輸出 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 \begin{DoxyCompactList}\small\item\em 將 兩個字串用人類習慣... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 \begin{DoxyCompactList}\small\item\em 將兩 個字串用人類習慣... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...{DoxyCompactList}\small\item\em 將兩個 字串用人類習慣的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...xyCompactList}\small\item\em 將兩個字 串用人類習慣的檔... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...ompactList}\small\item\em 將兩個字串 用人類習慣的檔名... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...actList}\small\item\em 將兩個字串用 人類習慣的檔名排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:人 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...List}\small\item\em 將兩個字串用人 類習慣的檔名排序... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...t}\small\item\em 將兩個字串用人類 習慣的檔名排序方... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:習 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...small\item\em 將兩個字串用人類習 慣的檔名排序方式... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:慣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...ll\item\em 將兩個字串用人類習慣 的檔名排序方式排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...item\em 將兩個字串用人類習慣的 檔名排序方式排序 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...m\em 將兩個字串用人類習慣的檔 名排序方式排序 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...m 將兩個字串用人類習慣的檔名 排序方式排序 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...兩個字串用人類習慣的檔名排 序方式排序 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...個字串用人類習慣的檔名排序 方式排序 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...字串用人類習慣的檔名排序方 式排序 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...串用人類習慣的檔名排序方式 排序 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...用人類習慣的檔名排序方式排 序 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...人類習慣的檔名排序方式排序 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [17] ! Package inputenc Error: Unicode char \u8:圓 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.285 \begin{DoxyCompactList}\small\item\em 圓 周率... \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:周 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.285 \begin{DoxyCompactList}\small\item\em 圓周 率... \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:率 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.285 ...{DoxyCompactList}\small\item\em 圓周率 ... \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 340 [][][] [] LaTeX Font Info: Font shape `OT1/phv/bx/it' in size <10> not available (Font) Font shape `OT1/phv/b/it' tried instead on input line 344. LaTeX Font Info: Font shape `OT1/phv/b/it' in size <10> not available (Font) Font shape `OT1/phv/b/sl' tried instead on input line 344. LaTeX Font Info: Font shape `OT1/phv/b/sl' will be (Font) scaled to size 8.99994pt on input line 344. LaTeX Font Info: Font shape `OT1/pcr/bx/n' in size <10> not available (Font) Font shape `OT1/pcr/b/n' tried instead on input line 365. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只 將 {\ttfamily sigs} 個標準差以內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只將 {\ttfamily sigs} 個標準差以內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只將 {\ttfamily sigs} 個 標準差以內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只將 {\ttfamily sigs} 個標 準差以內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只將 {\ttfamily sigs} 個標準 差以內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 只將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ... {\ttfamily sigs} 個標準差以內的 數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ...{\ttfamily sigs} 個標準差以內的數 據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ...tfamily sigs} 個標準差以內的數據 拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ...mily sigs} 個標準差以內的數據拿 來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ...y sigs} 個標準差以內的數據拿來 取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ...igs} 個標準差以內的數據拿來取 平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ...} 個標準差以內的數據拿來取平 均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 ...標準差以內的數據拿來取平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只 將 {\ttfamily sigs} 個標準差以內的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只將 {\ttfamily sigs} 個標準差以內的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只將 {\ttfamily sigs} 個 標準差以內的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只將 {\ttfamily sigs} 個標 準差以內的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只將 {\ttfamily sigs} 個標準 差以內的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 只將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ... {\ttfamily sigs} 個標準差以內的 數據拿來取平均, 不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...{\ttfamily sigs} 個標準差以內的數 據拿來取平均, 不過... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...tfamily sigs} 個標準差以內的數據 拿來取平均, 不過這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...mily sigs} 個標準差以內的數據拿 來取平均, 不過這次... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...y sigs} 個標準差以內的數據拿來 取平均, 不過這次用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...igs} 個標準差以內的數據拿來取 平均, 不過這次用 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...} 個標準差以內的數據拿來取平 均, 不過這次用 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...標準差以內的數據拿來取平均 , 不過這次用 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...準差以內的數據拿來取平均, 不 過這次用 {\ttfamily p}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...差以內的數據拿來取平均, 不過 這次用 {\ttfamily p} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...以內的數據拿來取平均, 不過這 次用 {\ttfamily p} 來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...內的數據拿來取平均, 不過這次 用 {\ttfamily p} 來加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...的數據拿來取平均, 不過這次用 {\ttfamily p} 來加權... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...平均, 不過這次用 {\ttfamily p} 來 加權平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...均, 不過這次用 {\ttfamily p} 來加 權平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:權 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ..., 不過這次用 {\ttfamily p} 來加權 平均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...過這次用 {\ttfamily p} 來加權平 均 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 ...這次用 {\ttfamily p} 來加權平均 Your command was ignored. Type I to replace it with another command, or to continue without it. [18] [19] ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢 查給定字串的結尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查 給定字串的結尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給 定字串的結尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定 字串的結尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字 串的結尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串 的結尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的 結尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的結 尾是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的結尾 是否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的結尾是 否符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的結尾是否 符合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的結尾是否符 合給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的結尾是否符合 給定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 檢查給定字串的結尾是否符合給 定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...給定字串的結尾是否符合給定 的數個patterns中的一個 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...定字串的結尾是否符合給定的 數個patterns中的一個 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...字串的結尾是否符合給定的數 個patterns中的一個 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...串的結尾是否符合給定的數個 patterns中的一個 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...尾是否符合給定的數個patterns中 的一個 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...是否符合給定的數個patterns中的 一個 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...否符合給定的數個patterns中的一 個 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 ...符合給定的數個patterns中的一個 Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Font shape `OT1/phv/bc/n' will be (Font) scaled to size 8.99994pt on input line 726. LaTeX Font Info: Font shape `OT1/phv/m/it' in size <10> not available (Font) Font shape `OT1/phv/m/sl' tried instead on input line 727. LaTeX Font Info: Font shape `OT1/phv/m/sl' will be (Font) scaled to size 8.99994pt on input line 727. ! Package inputenc Error: Unicode char \u8:愈 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 \mbox{\tt in} & {\em str} & 愈 檢查的字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 \mbox{\tt in} & {\em str} & 愈檢 查的字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 \mbox{\tt in} & {\em str} & 愈檢查 的字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 \mbox{\tt in} & {\em str} & 愈檢查的 字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 \mbox{\tt in} & {\em str} & 愈檢查的字 串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 ...\tt in} & {\em str} & 愈檢查的字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.729 \mbox{\tt in} & {\em n} & pattern數 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:各 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 \mbox{\tt in} & {\em ...} & 各 種pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 \mbox{\tt in} & {\em ...} & 各種 pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 734 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 {\ttfamily true/false} 表 示 {\bfseries 是否有符合} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:示 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 {\ttfamily true/false} 表示 {\bfseries 是否有符合} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 {\ttfamily true/false} 表示 {\bfseries 是 否有符合} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 ...mily true/false} 表示 {\bfseries 是否 有符合} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 ...y true/false} 表示 {\bfseries 是否有 符合} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 ...rue/false} 表示 {\bfseries 是否有符 合} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 .../false} 表示 {\bfseries 是否有符合 } Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 737 [][][] [] ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參 數中所有的字串都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數 中所有的字串都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中 所有的字串都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所 有的字串都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所有 的字串都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所有的 字串都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所有的字 串都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所有的字串 都是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所有的字串都 是用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所有的字串都是 用{\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 參數中所有的字串都是用 {\ttfamily cstring} 來傳遞, 也就... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...的字串都是用{\ttfamily cstring} 來 傳遞, 也就是 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...字串都是用{\ttfamily cstring} 來傳 遞, 也就是 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:遞 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...串都是用{\ttfamily cstring} 來傳遞 , 也就是 {\ttfamily cha... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:也 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...是用{\ttfamily cstring} 來傳遞, 也 就是 {\ttfamily char} {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...用{\ttfamily cstring} 來傳遞, 也就 是 {\ttfamily char} {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...{\ttfamily cstring} 來傳遞, 也就是 {\ttfamily char} {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...tfamily char} {\ttfamily const$\ast$} 型 態 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:態 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.738 ...mily char} {\ttfamily const$\ast$} 型態 Your command was ignored. Type I to replace it with another command, or to continue without it. [20] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將 兩個字串用人類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩 個字串用人類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個 字串用人類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字 串用人類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串 用人類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用 人類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:人 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人 類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人類 習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:習 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人類習 慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:慣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人類習慣 的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人類習慣的 檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人類習慣的檔 名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人類習慣的檔名 排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 將兩個字串用人類習慣的檔名排 序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 ...個字串用人類習慣的檔名排序 方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 ...字串用人類習慣的檔名排序方 式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 ...串用人類習慣的檔名排序方式 排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 ...用人類習慣的檔名排序方式排 序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.827 ...人類習慣的檔名排序方式排序 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:例 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.829 例 如 a1 $<$ a2 $<$ a3 $<$ a10 $<$ a12 $<$ a20, 而不是 a1 $<$ a10 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.829 例如 a1 $<$ a2 $<$ a3 $<$ a10 $<$ a12 $<$ a20, 而不是 a1 $<$ a10 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:而 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.829 ...<$ a2 $<$ a3 $<$ a10 $<$ a12 $<$ a20, 而 不是 a1 $<$ a10 $<$ a12 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.829 ...a2 $<$ a3 $<$ a10 $<$ a12 $<$ a20, 而不 是 a1 $<$ a10 $<$ a12 $<$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.829 ...$<$ a3 $<$ a10 $<$ a12 $<$ a20, 而不是 a1 $<$ a10 $<$ a12 $<$ a2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.833 \mbox{\tt in} & {\em f1} & 第 一個字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.833 \mbox{\tt in} & {\em f1} & 第一 個字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.833 \mbox{\tt in} & {\em f1} & 第一個 字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.833 \mbox{\tt in} & {\em f1} & 第一個字 串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.833 \mbox{\tt in} & {\em f1} & 第一個字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.835 \mbox{\tt in} & {\em f2} & 第 二個字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.835 \mbox{\tt in} & {\em f2} & 第二 個字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.835 \mbox{\tt in} & {\em f2} & 第二個 字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.835 \mbox{\tt in} & {\em f2} & 第二個字 串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.835 \mbox{\tt in} & {\em f2} & 第二個字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 838 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 {\ttfamily true/false} 表 {\bfseries f1是否該排在f2前面} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 {\ttfamily true/false} 表 {\bfseries f1是 否該排在f2前面} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 ...amily true/false} 表 {\bfseries f1是否 該排在f2前面} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 ...ly true/false} 表 {\bfseries f1是否該 排在f2前面} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 ...true/false} 表 {\bfseries f1是否該排 在f2前面} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 ...e/false} 表 {\bfseries f1是否該排在 f2前面} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 ...se} 表 {\bfseries f1是否該排在f2前 面} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:面 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.839 ... 表 {\bfseries f1是否該排在f2前面 } Your command was ignored. Type I to replace it with another command, or to continue without it. [21] LaTeX Font Info: Font shape `OT1/pcr/bx/it' in size <10> not available (Font) Font shape `OT1/pcr/b/it' tried instead on input line 959. LaTeX Font Info: Font shape `OT1/pcr/b/it' in size <10> not available (Font) Font shape `OT1/pcr/b/sl' tried instead on input line 959. ! Package inputenc Error: Unicode char \u8:階 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1005 階 層式輸出 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:層 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1005 階層 式輸出 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1005 階層式 輸出 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1005 階層式輸 出 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1005 階層式輸出 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 像 是printf, 但多了一個 {\bfseries 巢狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 像是 printf, 但多了一個 {\bfseries 巢狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:但 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 像是printf, 但 多了一個 {\bfseries 巢狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 像是printf, 但多 了一個 {\bfseries 巢狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 像是printf, 但多了 一個 {\bfseries 巢狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 像是printf, 但多了一 個 {\bfseries 巢狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 像是printf, 但多了一個 {\bfseries 巢狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:巢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 ...printf, 但多了一個 {\bfseries 巢 狀} 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:狀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 ...rintf, 但多了一個 {\bfseries 巢狀 } 的概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 ..., 但多了一個 {\bfseries 巢狀} 的 概念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:概 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 ...多了一個 {\bfseries 巢狀} 的概 念, 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:念 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 ...了一個 {\bfseries 巢狀} 的概念 , 例如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:例 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 ...一個 {\bfseries 巢狀} 的概念, 例 如\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1007 ...個 {\bfseries 巢狀} 的概念, 例如 \-: Your command was ignored. Type I to replace it with another command, or to continue without it. LaTeX Font Info: Font shape `OT1/phv/m/n' will be (Font) scaled to size 6.29996pt on input line 1010. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1027 ...\tt in} & {\em level\-\_\-change} & 分 以下三種情況\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1027 ... in} & {\em level\-\_\-change} & 分以 下三種情況\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:下 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1027 ...} & {\em level\-\_\-change} & 分以下 三種情況\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1027 ...& {\em level\-\_\-change} & 分以下三 種情況\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1027 ...\em level\-\_\-change} & 分以下三種 情況\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:情 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1027 ... level\-\_\-change} & 分以下三種情 況\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:況 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1027 ...vel\-\_\-change} & 分以下三種情況 \-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1029 \item == 0, 只 是印出一個information Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1029 \item == 0, 只是 印出一個information Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:印 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1029 \item == 0, 只是印 出一個information Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1029 \item == 0, 只是印出 一個information Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1029 \item == 0, 只是印出一 個information Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1029 \item == 0, 只是印出一個 information Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:印 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1030 \item == 1, 印 出一個message, 並且level++ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1030 \item == 1, 印出 一個message, 並且level++ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1030 \item == 1, 印出一 個message, 並且level++ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1030 \item == 1, 印出一個 message, 並且level++ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1030 \item == 1, 印出一個message, 並 且level++ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1030 \item == 1, 印出一個message, 並且 level++ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表 示此訊息相對應最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:示 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示 此訊息相對應最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示此 訊息相對應最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示此訊 息相對應最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:息 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示此訊息 相對應最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示此訊息相 對應最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示此訊息相對 應最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示此訊息相對應 最近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 \item == -\/1, 表示此訊息相對應最 近一次level++的那個me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 ... == -\/1, 表示此訊息相對應最近 一次level++的那個message Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 ... -\/1, 表示此訊息相對應最近一 次level++的那個message Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 .../1, 表示此訊息相對應最近一次 level++的那個message Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 ...此訊息相對應最近一次level++的 那個message Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:那 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 ...訊息相對應最近一次level++的那 個message Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1031 ...息相對應最近一次level++的那個 message Your command was ignored. Type I to replace it with another command, or to continue without it. [22] ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1034 \mbox{\tt in} & {\em fmt,...} & 跟 printf一樣 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1034 ...{\tt in} & {\em fmt,...} & 跟printf一 樣 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1034 ...t in} & {\em fmt,...} & 跟printf一樣 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 1037 [][][] [] ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1038 無 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如 果abs(輸入的數值) $<$ eps, 則回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果 abs(輸入的數值) $<$ eps, 則回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果abs(輸 入的數值) $<$ eps, 則回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果abs(輸入 的數值) $<$ eps, 則回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果abs(輸入的 數值) $<$ eps, 則回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果abs(輸入的數 值) $<$ eps, 則回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果abs(輸入的數值 ) $<$ eps, 則回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果abs(輸入的數值) $<$ eps, 則 回傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 如果abs(輸入的數值) $<$ eps, 則回 傳0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...abs(輸入的數值) $<$ eps, 則回傳 0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...入的數值) $<$ eps, 則回傳0, 否 則回傳輸入的數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...的數值) $<$ eps, 則回傳0, 否則 回傳輸入的數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...數值) $<$ eps, 則回傳0, 否則回 傳輸入的數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...值) $<$ eps, 則回傳0, 否則回傳 輸入的數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...) $<$ eps, 則回傳0, 否則回傳輸 入的數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ... $<$ eps, 則回傳0, 否則回傳輸入 的數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...$ eps, 則回傳0, 否則回傳輸入的 數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ...ps, 則回傳0, 否則回傳輸入的數 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1054 ... 則回傳0, 否則回傳輸入的數值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! LaTeX Error: Environment aligned undefined. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.1126 ... iterations $ M $ \-: \[ \begin{aligned} & (1 - p_0^N)^M \leq(1 - ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Misplaced alignment tab character &. l.1126 ...terations $ M $ \-: \[ \begin{aligned} & (1 - p_0^N)^M \leq(1 - P)... I can't figure out why you would want to use a tab mark here. If you just want an ampersand, the remedy is simple: Just type `I\&' now. But if some right brace up above has ended a previous alignment prematurely, you're probably due for more error messages, and you might try typing `S' now just to see what is salvageable. ! Misplaced alignment tab character &. l.1126 ... - p_0^N)^M \leq(1 - P) \\ \Rightarrow & M \log(1 - p_0^N) \leq \l... I can't figure out why you would want to use a tab mark here. If you just want an ampersand, the remedy is simple: Just type `I\&' now. But if some right brace up above has ended a previous alignment prematurely, you're probably due for more error messages, and you might try typing `S' now just to see what is salvageable. ! Misplaced alignment tab character &. l.1126 ...p_0^N) \leq \log(1 - P) \\ \Rightarrow & M \geq \frac{\log(1 - p)}... I can't figure out why you would want to use a tab mark here. If you just want an ampersand, the remedy is simple: Just type `I\&' now. But if some right brace up above has ended a previous alignment prematurely, you're probably due for more error messages, and you might try typing `S' now just to see what is salvageable. ! LaTeX Error: \begin{document} ended by \end{aligned}. See the LaTeX manual or LaTeX Companion for explanation. Type H for immediate help. ... l.1126 ...ightarrow \log(1-p_0^N)<0) \end{aligned} \] Your command was ignored. Type I to replace it with another command, or to continue without it. [23] Underfull \hbox (badness 10000) detected at line 1143 [][][] [] Underfull \hbox (badness 10000) detected at line 1146 [][][] [] ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類 似\-C的printf, 不過是將格式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似 \-C的printf, 不過是將格式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的 printf, 不過是將格式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的printf, 不 過是將格式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的printf, 不過 是將格式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的printf, 不過是 將格式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的printf, 不過是將 格式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:格 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的printf, 不過是將格 式化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的printf, 不過是將格式 化的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 類似\-C的printf, 不過是將格式化 的字串丟到 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...\-C的printf, 不過是將格式化的 字串丟到 {\ttfamily st... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...-C的printf, 不過是將格式化的字 串丟到 {\ttfamily std\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...printf, 不過是將格式化的字串 丟到 {\ttfamily std\-::s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...rintf, 不過是將格式化的字串丟 到 {\ttfamily std\-::stri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...tf, 不過是將格式化的字串丟到 {\ttfamily std\-::string}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...串丟到 {\ttfamily std\-::string} 裡 回傳 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...丟到 {\ttfamily std\-::string} 裡回 傳 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1248 ...到 {\ttfamily std\-::string} 裡回傳 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1252 \mbox{\tt in} & {\em fmt,...} & 同 printf \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 1255 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1256 一 個 {\ttfamily std\-::string} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1256 一個 {\ttfamily std\-::string} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 1258 [][][] [] ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目 前格式化字串最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前 格式化字串最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:格 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格 式化字串最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式 化字串最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化 字串最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字 串最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字串 最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字串最 長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:長 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字串最長 只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字串最長只 支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字串最長只支 援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字串最長只支援 8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 目前格式化字串最長只支援8191個 字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 ...格式化字串最長只支援8191個字 元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:元 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1259 ...式化字串最長只支援8191個字元 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將 輸入字串中的某個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸 入字串中的某個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入 字串中的某個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字 串中的某個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串 中的某個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串中 的某個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串中的 某個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串中的某 個pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串中的某個 pattern取代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串中的某個pattern取 代成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串中的某個pattern取代 成另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 將輸入字串中的某個pattern取代成 另一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 ...入字串中的某個pattern取代成另 一個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 ...字串中的某個pattern取代成另一 個pattern Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1276 ...串中的某個pattern取代成另一個 pattern Your command was ignored. Type I to replace it with another command, or to continue without it. [24] ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1280 \mbox{\tt in} & {\em str} & 輸 入的字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1280 \mbox{\tt in} & {\em str} & 輸入 的字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1280 \mbox{\tt in} & {\em str} & 輸入的 字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1280 \mbox{\tt in} & {\em str} & 輸入的字 串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1280 ...x{\tt in} & {\em str} & 輸入的字串 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1282 \mbox{\tt in} & {\em from} & 要 被取代的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1282 \mbox{\tt in} & {\em from} & 要被 取代的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1282 \mbox{\tt in} & {\em from} & 要被取 代的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1282 \mbox{\tt in} & {\em from} & 要被取代 的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1282 ...{\tt in} & {\em from} & 要被取代的 pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1284 \mbox{\tt in} & {\em to} & 將 要取代的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1284 \mbox{\tt in} & {\em to} & 將要 取代的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1284 \mbox{\tt in} & {\em to} & 將要取 代的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1284 \mbox{\tt in} & {\em to} & 將要取代 的pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1284 \mbox{\tt in} & {\em to} & 將要取代的 pattern \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 1287 [][][] [] ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1288 取 代後的字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1288 取代 後的字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1288 取代後 的字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1288 取代後的 字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1288 取代後的字 串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1288 取代後的字串 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 1290 [][][] [] ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有 礙於目前實作方法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:礙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙 於目前實作方法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於 目前實作方法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目 前實作方法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前 實作方法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實 作方法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作 方法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作方 法很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:法 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作方法 很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:很 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作方法很 低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:低 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作方法很低 級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:級 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作方法很低級 暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:暴 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作方法很低級暴 力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:力 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 有礙於目前實作方法很低級暴力 , 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 ...目前實作方法很低級暴力, 時 間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 ...前實作方法很低級暴力, 時間 複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 ...實作方法很低級暴力, 時間複 雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 ...作方法很低級暴力, 時間複雜 度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 ...方法很低級暴力, 時間複雜度 神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:神 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 ...法很低級暴力, 時間複雜度神 高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1291 ...很低級暴力, 時間複雜度神高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就 只是個取絕對值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就只 是個取絕對值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就只是 個取絕對值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就只是個 取絕對值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就只是個取 絕對值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:絕 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就只是個取絕 對值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就只是個取絕對 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1306 就只是個取絕對值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圓 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1363 圓 周率... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:周 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1363 圓周 率... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:率 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.1363 圓周率 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ) [25] [26 ] Chapter 6. (./classmeow_1_1BallProjection.tex LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <14.4> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 3. LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <10.95> not available (Font) Font shape `OT1/ptm/b/n' tried instead on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1BallProjection.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1BallProjection.pdf used on input line 16. (pdftex.def) Requested size: 144.39897pt x 56.9055pt. [27 <./classmeow_1_1BallProjection.pdf>] Underfull \hbox (badness 10000) detected at line 65 [][][] [] [28] Underfull \hbox (badness 10000) detected at line 145 [][][] [] Underfull \hbox (badness 10000) detected at line 191 [][][] [] [29] Underfull \hbox (badness 10000) detected at line 229 [][][] [] [30] [31] Underfull \hbox (badness 10000) detected at line 340 [][][] [] Underfull \hbox (badness 10000) detected at line 363 [][][] [] Underfull \hbox (badness 10000) detected at line 388 [][][] [] Underfull \hbox (badness 10000) detected at line 391 [][][] [] ) (./classmeow_1_1BinaryIndexTree.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:極 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 極 度簡化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 極度 簡化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:簡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 極度簡 化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 極度簡化 的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 極度簡化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...assmeow_1_1SegmentTree}{Segment\-Tree}} 已 無區間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...meow_1_1SegmentTree}{Segment\-Tree}} 已無 區間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...w_1_1SegmentTree}{Segment\-Tree}} 已無區 間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ..._1SegmentTree}{Segment\-Tree}} 已無區間 更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:更 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...egmentTree}{Segment\-Tree}} 已無區間更 新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...entTree}{Segment\-Tree}} 已無區間更新 的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...Tree}{Segment\-Tree}} 已無區間更新的 操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...e}{Segment\-Tree}} 已無區間更新的操 作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...Segment\-Tree}} 已無區間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 將 資料洗掉, 重設 \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 將資 料洗掉, 重設 \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...n{DoxyCompactList}\small\item\em 將資料 洗掉, 重設 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:洗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...oxyCompactList}\small\item\em 將資料洗 掉, 重設 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:掉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...CompactList}\small\item\em 將資料洗掉 , 重設 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...ctList}\small\item\em 將資料洗掉, 重 設 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...ist}\small\item\em 將資料洗掉, 重設 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [32] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 將 array中第 {\itshape index} (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...DoxyCompactList}\small\item\em 將array中 第 {\itshape index} (從... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...yCompactList}\small\item\em 將array中第 {\itshape index} (從零... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...em\em 將array中第 {\itshape index} (從 零算起)個element多加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:零 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...em 將array中第 {\itshape index} (從零 算起)個element多加上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...將array中第 {\itshape index} (從零算 起)個element多加上指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...array中第 {\itshape index} (從零算起 )個element多加上指定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...y中第 {\itshape index} (從零算起)個 element多加上指定的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...itshape index} (從零算起)個element多 加上指定的值 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...hape index} (從零算起)個element多加 上指定的值 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...e index} (從零算起)個element多加上 指定的值 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...ndex} (從零算起)個element多加上指 定的值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...x} (從零算起)個element多加上指定 的值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...(從零算起)個element多加上指定的 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...零算起)個element多加上指定的值 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 詢 問 {\itshape 0$\sim$index} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 詢問 {\itshape 0$\sim$index} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...item\em 詢問 {\itshape 0$\sim$index} 的 區間值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...m\em 詢問 {\itshape 0$\sim$index} 的區 間值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...m 詢問 {\itshape 0$\sim$index} 的區間 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...問 {\itshape 0$\sim$index} 的區間值 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:極 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 極 度簡化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 極度 簡化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:簡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 極度簡 化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 極度簡化 的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 極度簡化的 {\ttfamily \hyperlink{classmeow_1_1SegmentTree}{Segment... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...ssmeow_1_1SegmentTree}{Segment\-Tree}} 已 無區間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...eow_1_1SegmentTree}{Segment\-Tree}} 已無 區間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ..._1_1SegmentTree}{Segment\-Tree}} 已無區 間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...1SegmentTree}{Segment\-Tree}} 已無區間 更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:更 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...gmentTree}{Segment\-Tree}} 已無區間更 新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...ntTree}{Segment\-Tree}} 已無區間更新 的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...ree}{Segment\-Tree}} 已無區間更新的 操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...}{Segment\-Tree}} 已無區間更新的操 作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...egment\-Tree}} 已無區間更新的操作 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一 般來說只能用在維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:般 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般 來說只能用在維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來 說只能用在維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說 只能用在維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只 能用在維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能 用在維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用 在維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用在 維護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用在維 護區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用在維護 區間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用在維護區 間總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用在維護區間 總和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:總 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用在維護區間總 和, 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:和 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 一般來說只能用在維護區間總和 , 維護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...來說只能用在維護區間總和, 維 護區間最大值只有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...說只能用在維護區間總和, 維護 區間最大值只有在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...只能用在維護區間總和, 維護區 間最大值只有在特... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...能用在維護區間總和, 維護區間 最大值只有在特殊... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...用在維護區間總和, 維護區間最 大值只有在特殊情... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...在維護區間總和, 維護區間最大 值只有在特殊情況... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...維護區間總和, 維護區間最大值 只有在特殊情況才... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...護區間總和, 維護區間最大值只 有在特殊情況才可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...區間總和, 維護區間最大值只有 在特殊情況才可以, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...間總和, 維護區間最大值只有在 特殊情況才可以, 即... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...總和, 維護區間最大值只有在特 殊情況才可以, 即 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:殊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...和, 維護區間最大值只有在特殊 情況才可以, 即 {\bfs... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:情 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ..., 維護區間最大值只有在特殊情 況才可以, 即 {\bfseri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:況 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...維護區間最大值只有在特殊情況 才可以, 即 {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:才 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...護區間最大值只有在特殊情況才 可以, 即 {\bfseries 針... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...區間最大值只有在特殊情況才可 以, 即 {\bfseries 針對... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...間最大值只有在特殊情況才可以 , 即 {\bfseries 針對每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...大值只有在特殊情況才可以, 即 {\bfseries 針對每個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:針 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...特殊情況才可以, 即 {\bfseries 針 對每個元素}, {\bfseri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...殊情況才可以, 即 {\bfseries 針對 每個元素}, {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...情況才可以, 即 {\bfseries 針對每 個元素}, {\bfseries 每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...況才可以, 即 {\bfseries 針對每個 元素}, {\bfseries 每次... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:元 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...才可以, 即 {\bfseries 針對每個元 素}, {\bfseries 每次upd... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:素 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...可以, 即 {\bfseries 針對每個元素 }, {\bfseries 每次update... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...series 針對每個元素}, {\bfseries 每 次update()} {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...ies 針對每個元素}, {\bfseries 每次 update()} {\bfseries 的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... {\bfseries 每次update()} {\bfseries 的 值一定會大於等於... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...bfseries 每次update()} {\bfseries 的值 一定會大於等於原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...eries 每次update()} {\bfseries 的值一 定會大於等於原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...es 每次update()} {\bfseries 的值一定 會大於等於原本的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...每次update()} {\bfseries 的值一定會 大於等於原本的值} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...次update()} {\bfseries 的值一定會大 於等於原本的值} . ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...update()} {\bfseries 的值一定會大於 等於原本的值} . 若... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...ate()} {\bfseries 的值一定會大於等 於原本的值} . 若要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...()} {\bfseries 的值一定會大於等於 原本的值} . 若要用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... {\bfseries 的值一定會大於等於原 本的值} . 若要用區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...bfseries 的值一定會大於等於原本 的值} . 若要用區間... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...eries 的值一定會大於等於原本的 值} . 若要用區間最... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...es 的值一定會大於等於原本的值 } . 若要用區間最大... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...一定會大於等於原本的值} . 若 要用區間最大值 , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...定會大於等於原本的值} . 若要 用區間最大值 , 則 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...會大於等於原本的值} . 若要用 區間最大值 , 則 {\it... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...大於等於原本的值} . 若要用區 間最大值 , 則 {\itsha... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...於等於原本的值} . 若要用區間 最大值 , 則 {\itshape ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...等於原本的值} . 若要用區間最 大值 , 則 {\itshape Val... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...於原本的值} . 若要用區間最大 值 , 則 {\itshape Value}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...原本的值} . 若要用區間最大值 , 則 {\itshape Value} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...的值} . 若要用區間最大值 , 則 {\itshape Value} 的 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...區間最大值 , 則 {\itshape Value} 的 {\ttfamily operator+} 要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...shape Value} 的 {\ttfamily operator+} 要 寫成 {\ttfamily std\-::m... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...pe Value} 的 {\ttfamily operator+} 要寫 成 {\ttfamily std\-::max}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...Value} 的 {\ttfamily operator+} 要寫成 {\ttfamily std\-::max}(...) Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 37 [][][] [] ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \mbox{\tt in} & {\em size} & 要 維護的區間大小 {\bfseries }\mbo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \mbox{\tt in} & {\em size} & 要維 護的區間大小 {\bfseries }\mbo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \mbox{\tt in} & {\em size} & 要維護 的區間大小 {\bfseries }\mbo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \mbox{\tt in} & {\em size} & 要維護的 區間大小 {\bfseries }\mbo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \mbox{\tt in} & {\em size} & 要維護的區 間大小 {\bfseries }\mbo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...\tt in} & {\em size} & 要維護的區間 大小 {\bfseries }\mbox{[... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ... in} & {\em size} & 要維護的區間大 小 {\bfseries }\mbox{[}0,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...} & {\em size} & 要維護的區間大小 {\bfseries }\mbox{[}0,siz... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 \mbox{\tt in} & {\em value} & 預 設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 \mbox{\tt in} & {\em value} & 預設 值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 \mbox{\tt in} & {\em value} & 預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 將 另一個 {\ttfamily \hyperlink{classmeow_1_1BinaryIndexTree}{Binary... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 將另 一個 {\ttfamily \hyperlink{classmeow_1_1BinaryIndexTree}{Binary... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 將另一 個 {\ttfamily \hyperlink{classmeow_1_1BinaryIndexTree}{Binary... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 將另一個 {\ttfamily \hyperlink{classmeow_1_1BinaryIndexTree}{Binary... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...BinaryIndexTree}{Binary\-Index\-Tree}} 原 封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:封 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...aryIndexTree}{Binary\-Index\-Tree}} 原封 不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...IndexTree}{Binary\-Index\-Tree}} 原封不 動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:動 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...exTree}{Binary\-Index\-Tree}} 原封不動 的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...ree}{Binary\-Index\-Tree}} 原封不動的 複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...}{Binary\-Index\-Tree}} 原封不動的複 製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...inary\-Index\-Tree}} 原封不動的複製 過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...ry\-Index\-Tree}} 原封不動的複製過 來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.96 ...-Index\-Tree}} 原封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \mbox{\tt in} & {\em tree2} & 另 外一個 {\ttfamily \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \mbox{\tt in} & {\em tree2} & 另外 一個 {\ttfamily \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \mbox{\tt in} & {\em tree2} & 另外一 個 {\ttfamily \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \mbox{\tt in} & {\em tree2} & 另外一個 {\ttfamily \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.117 詢 問 {\itshape 0$\sim$index} 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.117 詢問 {\itshape 0$\sim$index} 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.117 詢問 {\itshape 0$\sim$index} 的 區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.117 詢問 {\itshape 0$\sim$index} 的區 間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.117 詢問 {\itshape 0$\sim$index} 的區間 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.117 詢問 {\itshape 0$\sim$index} 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 時 間複雜度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 時間 複雜度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 時間複 雜度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 時間複雜 度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 時間複雜度 {\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. [33] ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.123 \mbox{\tt in} & {\em index} & 指 定的index \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.123 \mbox{\tt in} & {\em index} & 指定 的index \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.123 \mbox{\tt in} & {\em index} & 指定的 index \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 126 [][][] [] ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 區 間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 區間 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 將 資料洗掉, 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 將資 料洗掉, 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 將資料 洗掉, 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:洗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 將資料洗 掉, 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:掉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 將資料洗掉 , 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 將資料洗掉, 重 設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 將資料洗掉, 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 時 間複雜度{\bfseries O(\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 時間 複雜度{\bfseries O(\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 時間複 雜度{\bfseries O(\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 時間複雜 度{\bfseries O(\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 時間複雜度 {\bfseries O(\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 \mbox{\tt in} & {\em size} & 要 維護的區間大小 {\bfseries }\mb... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 \mbox{\tt in} & {\em size} & 要維 護的區間大小 {\bfseries }\mb... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 \mbox{\tt in} & {\em size} & 要維護 的區間大小 {\bfseries }\mb... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 \mbox{\tt in} & {\em size} & 要維護的 區間大小 {\bfseries }\mb... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 ...x{\tt in} & {\em size} & 要維護的區 間大小 {\bfseries }\mbo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 ...tt in} & {\em size} & 要維護的區間 大小 {\bfseries }\mbox{[... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 ...in} & {\em size} & 要維護的區間大 小 {\bfseries }\mbox{[}0,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 ... & {\em size} & 要維護的區間大小 {\bfseries }\mbox{[}0,siz... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 \mbox{\tt in} & {\em init} & 預 設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 \mbox{\tt in} & {\em init} & 預設 值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 \mbox{\tt in} & {\em init} & 預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 154 [][][] [] ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 無 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 將 array中第 {\itshape index} (從零算起)個element多加上指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 將array中 第 {\itshape index} (從零算起)個element多加上指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 將array中第 {\itshape index} (從零算起)個element多加上指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 將array中第 {\itshape index} (從 零算起)個element多加上指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:零 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 將array中第 {\itshape index} (從零 算起)個element多加上指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 將array中第 {\itshape index} (從零算 起)個element多加上指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...rray中第 {\itshape index} (從零算起 )個element多加上指定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...中第 {\itshape index} (從零算起)個 element多加上指定的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...tshape index} (從零算起)個element多 加上指定的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...ape index} (從零算起)個element多加 上指定的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ... index} (從零算起)個element多加上 指定的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...dex} (從零算起)個element多加上指 定的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...} (從零算起)個element多加上指定 的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...從零算起)個element多加上指定的 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.171 ...零算起)個element多加上指定的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 時 間複雜度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 時間 複雜度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 時間複 雜度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 時間複雜 度{\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 時間複雜度 {\bfseries O(log\-N)} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.177 \mbox{\tt in} & {\em index} & 指 定的index \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.177 \mbox{\tt in} & {\em index} & 指定 的index \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.177 \mbox{\tt in} & {\em index} & 指定的 index \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 \mbox{\tt in} & {\em value} & 指 定的值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 \mbox{\tt in} & {\em value} & 指定 的值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 \mbox{\tt in} & {\em value} & 指定的 值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 \mbox{\tt in} & {\em value} & 指定的值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 182 [][][] [] ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 無 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1Bitmap.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 二 維點陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 二維 點陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 二維點 陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 二維點陣 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 二維點陣資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 二維點陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1Bitmap.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1Bitmap.pdf used on input line 16. (pdftex.def) Requested size: 103.84995pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:產 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...ompactList}\small\item\em constructor, 產 生一個空的\-Bitmap \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:生 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...actList}\small\item\em constructor, 產生 一個空的\-Bitmap \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...List}\small\item\em constructor, 產生一 個空的\-Bitmap \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...t}\small\item\em constructor, 產生一個 空的\-Bitmap \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...small\item\em constructor, 產生一個空 的\-Bitmap \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...ll\item\em constructor, 產生一個空的 \-Bitmap \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...ompactList}\small\item\em constructor, 複 製一個bitmap \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...actList}\small\item\em constructor, 複製 一個bitmap \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...List}\small\item\em constructor, 複製一 個bitmap \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...t}\small\item\em constructor, 複製一個 bitmap \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...ompactList}\small\item\em constructor, 指 定寬高, 預設{\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...actList}\small\item\em constructor, 指定 寬高, 預設{\ttfamily P... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...List}\small\item\em constructor, 指定寬 高, 預設{\ttfamily Pixe... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...t}\small\item\em constructor, 指定寬高 , 預設{\ttfamily Pixel} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...all\item\em constructor, 指定寬高, 預 設{\ttfamily Pixel} \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\item\em constructor, 指定寬高, 預設 {\ttfamily Pixel} \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. [34 <./classmeow_1_1Bitmap.pdf>] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 複 製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 複製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 全 部重設 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 全部 重設 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...n{DoxyCompactList}\small\item\em 全部重 設 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...oxyCompactList}\small\item\em 全部重設 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 清 除資料, 寬高階規零 \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 清除 資料, 寬高階規零 \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...n{DoxyCompactList}\small\item\em 清除資 料, 寬高階規零 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...oxyCompactList}\small\item\em 清除資料 , 寬高階規零 \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...mpactList}\small\item\em 清除資料, 寬 高階規零 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...ctList}\small\item\em 清除資料, 寬高 階規零 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:階 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...ist}\small\item\em 清除資料, 寬高階 規零 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:規 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...}\small\item\em 清除資料, 寬高階規 零 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:零 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...mall\item\em 清除資料, 寬高階規零 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 回 傳高度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 回傳 高度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...n{DoxyCompactList}\small\item\em 回傳高 度 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...oxyCompactList}\small\item\em 回傳高度 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 回 傳寬度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 回傳 寬度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...n{DoxyCompactList}\small\item\em 回傳寬 度 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...oxyCompactList}\small\item\em 回傳寬度 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 回 傳高度乘以寬度 \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 回傳 高度乘以寬度 \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...n{DoxyCompactList}\small\item\em 回傳高 度乘以寬度 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...oxyCompactList}\small\item\em 回傳高度 乘以寬度 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乘 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...CompactList}\small\item\em 回傳高度乘 以寬度 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...pactList}\small\item\em 回傳高度乘以 寬度 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...tList}\small\item\em 回傳高度乘以寬 度 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...st}\small\item\em 回傳高度乘以寬度 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 修 改高度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 修改 高度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...n{DoxyCompactList}\small\item\em 修改高 度 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...oxyCompactList}\small\item\em 修改高度 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 修 改寬度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 修改 寬度 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...n{DoxyCompactList}\small\item\em 修改寬 度 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...oxyCompactList}\small\item\em 修改寬度 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 修 改寬高 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 修改 寬高 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...n{DoxyCompactList}\small\item\em 修改寬 高 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...oxyCompactList}\small\item\em 修改寬高 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 取 得 (y, x) 的pixel \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 取得 (y, x) 的pixel \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...mpactList}\small\item\em 取得 (y, x) 的 pixel \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 修 改 (y, x) 的pixel \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 修改 (y, x) 的pixel \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...mpactList}\small\item\em 修改 (y, x) 的 pixel \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 區 塊修改 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:塊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 區塊 修改 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...n{DoxyCompactList}\small\item\em 區塊修 改 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...oxyCompactList}\small\item\em 區塊修改 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 回 傳矩陣形式 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 回傳 矩陣形式 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:矩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...n{DoxyCompactList}\small\item\em 回傳矩 陣形式 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...oxyCompactList}\small\item\em 回傳矩陣 形式 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...CompactList}\small\item\em 回傳矩陣形 式 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...pactList}\small\item\em 回傳矩陣形式 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 回 傳矩陣形式 (non-\/constan... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 回傳 矩陣形式 (non-\/constan... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:矩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...n{DoxyCompactList}\small\item\em 回傳矩 陣形式 (non-\/constant ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...oxyCompactList}\small\item\em 回傳矩陣 形式 (non-\/constant for... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...CompactList}\small\item\em 回傳矩陣形 式 (non-\/constant form) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...pactList}\small\item\em 回傳矩陣形式 (non-\/constant form) \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 直 接設定 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 直接 設定 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...n{DoxyCompactList}\small\item\em 直接設 定 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...oxyCompactList}\small\item\em 直接設定 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 回 傳高斯模糊 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 回傳 高斯模糊 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...n{DoxyCompactList}\small\item\em 回傳高 斯模糊 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...oxyCompactList}\small\item\em 回傳高斯 模糊 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...CompactList}\small\item\em 回傳高斯模 糊 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...pactList}\small\item\em 回傳高斯模糊 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 把 自己高斯模糊 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 把自 己高斯模糊 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...n{DoxyCompactList}\small\item\em 把自己 高斯模糊 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...oxyCompactList}\small\item\em 把自己高 斯模糊 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...CompactList}\small\item\em 把自己高斯 模糊 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...pactList}\small\item\em 把自己高斯模 糊 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...tList}\small\item\em 把自己高斯模糊 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 回 傳對x偏微分 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 回傳 對x偏微分 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...n{DoxyCompactList}\small\item\em 回傳對 x偏微分 \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...xyCompactList}\small\item\em 回傳對x偏 微分 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...ompactList}\small\item\em 回傳對x偏微 分 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...actList}\small\item\em 回傳對x偏微分 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em 把 自己對x偏微分 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em 把自 己對x偏微分 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...n{DoxyCompactList}\small\item\em 把自己 對x偏微分 \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...oxyCompactList}\small\item\em 把自己對 x偏微分 \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...ompactList}\small\item\em 把自己對x偏 微分 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...actList}\small\item\em 把自己對x偏微 分 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...List}\small\item\em 把自己對x偏微分 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 回 傳對y偏微分 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 回傳 對y偏微分 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...n{DoxyCompactList}\small\item\em 回傳對 y偏微分 \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...xyCompactList}\small\item\em 回傳對y偏 微分 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...ompactList}\small\item\em 回傳對y偏微 分 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...actList}\small\item\em 回傳對y偏微分 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 把 自己對y偏微分 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 把自 己對y偏微分 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...n{DoxyCompactList}\small\item\em 把自己 對y偏微分 \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...oxyCompactList}\small\item\em 把自己對 y偏微分 \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...ompactList}\small\item\em 把自己對y偏 微分 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...actList}\small\item\em 把自己對y偏微 分 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...List}\small\item\em 把自己對y偏微分 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [35] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.81 \begin{DoxyCompactList}\small\item\em 將 資料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.81 \begin{DoxyCompactList}\small\item\em 將資 料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.81 ...n{DoxyCompactList}\small\item\em 將資料 寫入檔案 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.81 ...oxyCompactList}\small\item\em 將資料寫 入檔案 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.81 ...CompactList}\small\item\em 將資料寫入 檔案 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.81 ...pactList}\small\item\em 將資料寫入檔 案 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.81 ...tList}\small\item\em 將資料寫入檔案 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 \begin{DoxyCompactList}\small\item\em 將 資料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 \begin{DoxyCompactList}\small\item\em 將資 料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...n{DoxyCompactList}\small\item\em 將資料 讀入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...oxyCompactList}\small\item\em 將資料讀 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...CompactList}\small\item\em 將資料讀入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 \begin{DoxyCompactList}\small\item\em new一 個自己 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 ...n{DoxyCompactList}\small\item\em new一個 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 ...oxyCompactList}\small\item\em new一個自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 ...CompactList}\small\item\em new一個自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.89 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.89 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.89 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 二 維點陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 二維 點陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 二維點 陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 二維點陣 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 二維點陣資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 二維點陣資料 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 100 [][][] [] ! Package inputenc Error: Unicode char \u8:產 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 constructor, 產 生一個空的\-Bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:生 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 constructor, 產生 一個空的\-Bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 constructor, 產生一 個空的\-Bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 constructor, 產生一個 空的\-Bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 constructor, 產生一個空 的\-Bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.119 constructor, 產生一個空的 \-Bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複 製一個bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複製 一個bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複製一 個bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複製一個 bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 constructor, 指 定寬高, 預設{\ttfamily Pixel} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 constructor, 指定 寬高, 預設{\ttfamily Pixel} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 constructor, 指定寬 高, 預設{\ttfamily Pixel} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 constructor, 指定寬高 , 預設{\ttfamily Pixel} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 constructor, 指定寬高, 預 設{\ttfamily Pixel} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.151 constructor, 指定寬高, 預設 {\ttfamily Pixel} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 \mbox{\tt in} & {\em h} & 高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.157 \mbox{\tt in} & {\em w} & 寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. [36] ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 \mbox{\tt in} & {\em p} & 預 設pixel \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 \mbox{\tt in} & {\em p} & 預設 pixel \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 172. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 172. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 172. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清 除資料, 寬高階規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除 資料, 寬高階規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除資 料, 寬高階規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除資料 , 寬高階規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除資料, 寬 高階規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除資料, 寬高 階規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:階 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除資料, 寬高階 規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:規 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除資料, 寬高階規 零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:零 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 清除資料, 寬高階規零 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 複 製 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 複製 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.223 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.223 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.223 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.223 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 輸 入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 輸入 型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 輸入型 別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:別 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 輸入型別 是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 輸入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...}{Obj\-Base}} {\ttfamily const$\ast$} 這 裡假設實體其實是 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...bj\-Base}} {\ttfamily const$\ast$} 這裡 假設實體其實是 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:假 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...-Base}} {\ttfamily const$\ast$} 這裡假 設實體其實是 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...se}} {\ttfamily const$\ast$} 這裡假設 實體其實是 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...} {\ttfamily const$\ast$} 這裡假設實 體其實是 {\ttfamily \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...\ttfamily const$\ast$} 這裡假設實體 其實是 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...family const$\ast$} 這裡假設實體其 實是 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...ily const$\ast$} 這裡假設實體其實 是 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ... const$\ast$} 這裡假設實體其實是 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:事 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...erlink{classmeow_1_1Bitmap}{Bitmap}}. 事 實上這個method就只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...ink{classmeow_1_1Bitmap}{Bitmap}}. 事實 上這個method就只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...{classmeow_1_1Bitmap}{Bitmap}}. 事實上 這個method就只是幫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...assmeow_1_1Bitmap}{Bitmap}}. 事實上這 個method就只是幫忙... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...meow_1_1Bitmap}{Bitmap}}. 事實上這個 method就只是幫忙轉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...itmap}{Bitmap}}. 事實上這個method就 只是幫忙轉型然後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...ap}{Bitmap}}. 事實上這個method就只 是幫忙轉型然後呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...{Bitmap}}. 事實上這個method就只是 幫忙轉型然後呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...tmap}}. 事實上這個method就只是幫 忙轉型然後呼叫原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...p}}. 事實上這個method就只是幫忙 轉型然後呼叫原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:轉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 .... 事實上這個method就只是幫忙轉 型然後呼叫原本的{\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...實上這個method就只是幫忙轉型 然後呼叫原本的{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:然 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...上這個method就只是幫忙轉型然 後呼叫原本的{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...這個method就只是幫忙轉型然後 呼叫原本的{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...個method就只是幫忙轉型然後呼 叫原本的{\ttfamily cop... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...method就只是幫忙轉型然後呼叫 原本的{\ttfamily copy\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...ethod就只是幫忙轉型然後呼叫原 本的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...od就只是幫忙轉型然後呼叫原本 的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...只是幫忙轉型然後呼叫原本的 {\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 232 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 new一 個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 new一個 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 new一個自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 new一個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 254 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.255 一 個new出來的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.255 一個 new出來的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.255 一個new出 來的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.255 一個new出來 的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.255 一個new出來的 \-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 276 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ...r} {\ttfamily const{\ttfamily $\ast$} 形 式的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ...{\ttfamily const{\ttfamily $\ast$} 形式 的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ...tfamily const{\ttfamily $\ast$} 形式的 typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 回 傳高斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 回傳 高斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 回傳高 斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 回傳高斯 模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 回傳高斯模 糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 回傳高斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. [37] ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 \mbox{\tt in} & {\em radius\-Y} & 高 斯模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 \mbox{\tt in} & {\em radius\-Y} & 高斯 模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 \mbox{\tt in} & {\em radius\-Y} & 高斯模 糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 ...\tt in} & {\em radius\-Y} & 高斯模糊 的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 ... in} & {\em radius\-Y} & 高斯模糊的 \-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 ...& {\em radius\-Y} & 高斯模糊的\-Y軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 ...\em radius\-Y} & 高斯模糊的\-Y軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 ... radius\-Y} & 高斯模糊的\-Y軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.301 ...dius\-Y} & 高斯模糊的\-Y軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 \mbox{\tt in} & {\em radius\-X} & 高 斯模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 \mbox{\tt in} & {\em radius\-X} & 高斯 模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 \mbox{\tt in} & {\em radius\-X} & 高斯模 糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...\tt in} & {\em radius\-X} & 高斯模糊 的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ... in} & {\em radius\-X} & 高斯模糊的 \-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...& {\em radius\-X} & 高斯模糊的\-X軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...\em radius\-X} & 高斯模糊的\-X軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ... radius\-X} & 高斯模糊的\-X軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...dius\-X} & 高斯模糊的\-X軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 306 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 一 個{\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitmap}} , 是自己... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitmap}} , 是自己... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...rlink{classmeow_1_1Bitmap}{Bitmap}} , 是 自己被高斯模糊後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...nk{classmeow_1_1Bitmap}{Bitmap}} , 是自 己被高斯模糊後的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...classmeow_1_1Bitmap}{Bitmap}} , 是自己 被高斯模糊後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...ssmeow_1_1Bitmap}{Bitmap}} , 是自己被 高斯模糊後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...eow_1_1Bitmap}{Bitmap}} , 是自己被高 斯模糊後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ..._1_1Bitmap}{Bitmap}} , 是自己被高斯 模糊後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...1Bitmap}{Bitmap}} , 是自己被高斯模 糊後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...tmap}{Bitmap}} , 是自己被高斯模糊 後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...p}{Bitmap}} , 是自己被高斯模糊後 的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...Bitmap}} , 是自己被高斯模糊後的 結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...map}} , 是自己被高斯模糊後的結 果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.307 ...}} , 是自己被高斯模糊後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.323 把 自己高斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.323 把自 己高斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.323 把自己 高斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.323 把自己高 斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.323 把自己高斯 模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.323 把自己高斯模 糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.323 把自己高斯模糊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 \mbox{\tt in} & {\em radius\-Y} & 高 斯模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 \mbox{\tt in} & {\em radius\-Y} & 高斯 模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 \mbox{\tt in} & {\em radius\-Y} & 高斯模 糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...\tt in} & {\em radius\-Y} & 高斯模糊 的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ... in} & {\em radius\-Y} & 高斯模糊的 \-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...& {\em radius\-Y} & 高斯模糊的\-Y軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...\em radius\-Y} & 高斯模糊的\-Y軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ... radius\-Y} & 高斯模糊的\-Y軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...dius\-Y} & 高斯模糊的\-Y軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 \mbox{\tt in} & {\em radius\-X} & 高 斯模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 \mbox{\tt in} & {\em radius\-X} & 高斯 模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 \mbox{\tt in} & {\em radius\-X} & 高斯模 糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...\tt in} & {\em radius\-X} & 高斯模糊 的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ... in} & {\em radius\-X} & 高斯模糊的 \-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...& {\em radius\-X} & 高斯模糊的\-X軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...\em radius\-X} & 高斯模糊的\-X軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ... radius\-X} & 高斯模糊的\-X軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...dius\-X} & 高斯模糊的\-X軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 332 [][][] [] ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.349 把 自己對x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.349 把自 己對x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.349 把自己 對x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.349 把自己對 x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.349 把自己對x偏 微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.349 把自己對x偏微 分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.349 把自己對x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 \mbox{\tt in} & {\em radius\-Y} & 高 斯模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 \mbox{\tt in} & {\em radius\-Y} & 高斯 模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 \mbox{\tt in} & {\em radius\-Y} & 高斯模 糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 ...\tt in} & {\em radius\-Y} & 高斯模糊 的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 ... in} & {\em radius\-Y} & 高斯模糊的 \-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 ...& {\em radius\-Y} & 高斯模糊的\-Y軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 ...\em radius\-Y} & 高斯模糊的\-Y軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 ... radius\-Y} & 高斯模糊的\-Y軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.353 ...dius\-Y} & 高斯模糊的\-Y軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 \mbox{\tt in} & {\em radius\-X} & 高 斯模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 \mbox{\tt in} & {\em radius\-X} & 高斯 模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 \mbox{\tt in} & {\em radius\-X} & 高斯模 糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...\tt in} & {\em radius\-X} & 高斯模糊 的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ... in} & {\em radius\-X} & 高斯模糊的 \-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...& {\em radius\-X} & 高斯模糊的\-X軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...\em radius\-X} & 高斯模糊的\-X軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ... radius\-X} & 高斯模糊的\-X軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...dius\-X} & 高斯模糊的\-X軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 358 [][][] [] ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.375 把 自己對y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.375 把自 己對y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.375 把自己 對y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.375 把自己對 y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.375 把自己對y偏 微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.375 把自己對y偏微 分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.375 把自己對y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 \mbox{\tt in} & {\em radius\-Y} & 高 斯模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 \mbox{\tt in} & {\em radius\-Y} & 高斯 模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 \mbox{\tt in} & {\em radius\-Y} & 高斯模 糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 ...\tt in} & {\em radius\-Y} & 高斯模糊 的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 ... in} & {\em radius\-Y} & 高斯模糊的 \-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 ...& {\em radius\-Y} & 高斯模糊的\-Y軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 ...\em radius\-Y} & 高斯模糊的\-Y軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 ... radius\-Y} & 高斯模糊的\-Y軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.379 ...dius\-Y} & 高斯模糊的\-Y軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 \mbox{\tt in} & {\em radius\-X} & 高 斯模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 \mbox{\tt in} & {\em radius\-X} & 高斯 模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 \mbox{\tt in} & {\em radius\-X} & 高斯模 糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 ...\tt in} & {\em radius\-X} & 高斯模糊 的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 ... in} & {\em radius\-X} & 高斯模糊的 \-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 ...& {\em radius\-X} & 高斯模糊的\-X軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 ...\em radius\-X} & 高斯模糊的\-X軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 ... radius\-X} & 高斯模糊的\-X軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.381 ...dius\-X} & 高斯模糊的\-X軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 384 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.401 回 傳對x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.401 回傳 對x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.401 回傳對 x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.401 回傳對x偏 微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.401 回傳對x偏微 分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.401 回傳對x偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. [38] ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 \mbox{\tt in} & {\em radius\-Y} & 高 斯模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 \mbox{\tt in} & {\em radius\-Y} & 高斯 模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 \mbox{\tt in} & {\em radius\-Y} & 高斯模 糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...\tt in} & {\em radius\-Y} & 高斯模糊 的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ... in} & {\em radius\-Y} & 高斯模糊的 \-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...& {\em radius\-Y} & 高斯模糊的\-Y軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...\em radius\-Y} & 高斯模糊的\-Y軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ... radius\-Y} & 高斯模糊的\-Y軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...dius\-Y} & 高斯模糊的\-Y軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 \mbox{\tt in} & {\em radius\-X} & 高 斯模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 \mbox{\tt in} & {\em radius\-X} & 高斯 模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 \mbox{\tt in} & {\em radius\-X} & 高斯模 糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ...\tt in} & {\em radius\-X} & 高斯模糊 的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ... in} & {\em radius\-X} & 高斯模糊的 \-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ...& {\em radius\-X} & 高斯模糊的\-X軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ...\em radius\-X} & 高斯模糊的\-X軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ... radius\-X} & 高斯模糊的\-X軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ...dius\-X} & 高斯模糊的\-X軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 410 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 一 個{\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitmap}} , 是自己... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitmap}} , 是自己... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...rlink{classmeow_1_1Bitmap}{Bitmap}} , 是 自己被偏微分後的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...nk{classmeow_1_1Bitmap}{Bitmap}} , 是自 己被偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...classmeow_1_1Bitmap}{Bitmap}} , 是自己 被偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...ssmeow_1_1Bitmap}{Bitmap}} , 是自己被 偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...eow_1_1Bitmap}{Bitmap}} , 是自己被偏 微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ..._1_1Bitmap}{Bitmap}} , 是自己被偏微 分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...1Bitmap}{Bitmap}} , 是自己被偏微分 後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...tmap}{Bitmap}} , 是自己被偏微分後 的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...p}{Bitmap}} , 是自己被偏微分後的 結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...Bitmap}} , 是自己被偏微分後的結 果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...map}} , 是自己被偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.427 回 傳對y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.427 回傳 對y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.427 回傳對 y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.427 回傳對y偏 微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.427 回傳對y偏微 分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.427 回傳對y偏微分 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 \mbox{\tt in} & {\em radius\-Y} & 高 斯模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 \mbox{\tt in} & {\em radius\-Y} & 高斯 模糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 \mbox{\tt in} & {\em radius\-Y} & 高斯模 糊的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 ...\tt in} & {\em radius\-Y} & 高斯模糊 的\-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 ... in} & {\em radius\-Y} & 高斯模糊的 \-Y軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 ...& {\em radius\-Y} & 高斯模糊的\-Y軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 ...\em radius\-Y} & 高斯模糊的\-Y軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 ... radius\-Y} & 高斯模糊的\-Y軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.431 ...dius\-Y} & 高斯模糊的\-Y軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 \mbox{\tt in} & {\em radius\-X} & 高 斯模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 \mbox{\tt in} & {\em radius\-X} & 高斯 模糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 \mbox{\tt in} & {\em radius\-X} & 高斯模 糊的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:糊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ...\tt in} & {\em radius\-X} & 高斯模糊 的\-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ... in} & {\em radius\-X} & 高斯模糊的 \-X軸方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ...& {\em radius\-X} & 高斯模糊的\-X軸 方向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ...\em radius\-X} & 高斯模糊的\-X軸方 向的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ... radius\-X} & 高斯模糊的\-X軸方向 的sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ...dius\-X} & 高斯模糊的\-X軸方向的 sigma \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 436 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 一 個{\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitmap}} , 是自己... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitmap}} , 是自己... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...rlink{classmeow_1_1Bitmap}{Bitmap}} , 是 自己被偏微分後的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...nk{classmeow_1_1Bitmap}{Bitmap}} , 是自 己被偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...classmeow_1_1Bitmap}{Bitmap}} , 是自己 被偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...ssmeow_1_1Bitmap}{Bitmap}} , 是自己被 偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...eow_1_1Bitmap}{Bitmap}} , 是自己被偏 微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:微 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ..._1_1Bitmap}{Bitmap}} , 是自己被偏微 分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...1Bitmap}{Bitmap}} , 是自己被偏微分 後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...tmap}{Bitmap}} , 是自己被偏微分後 的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...p}{Bitmap}} , 是自己被偏微分後的 結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...Bitmap}} , 是自己被偏微分後的結 果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...map}} , 是自己被偏微分後的結果 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 回 傳高度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 回傳 高度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 回傳高 度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 回傳高度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 修 改高度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 修改 高度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 修改高 度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 修改高度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 \mbox{\tt in} & {\em h2} & 新 的高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 \mbox{\tt in} & {\em h2} & 新的 高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 \mbox{\tt in} & {\em h2} & 新的高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 \mbox{\tt in} & {\em p} & 如 果高有變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 \mbox{\tt in} & {\em p} & 如果 高有變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 \mbox{\tt in} & {\em p} & 如果高 有變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 \mbox{\tt in} & {\em p} & 如果高有 變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 \mbox{\tt in} & {\em p} & 如果高有變 大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...x{\tt in} & {\em p} & 如果高有變大 , 則新長出來的地方... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ... in} & {\em p} & 如果高有變大, 則 新長出來的地方用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...} & {\em p} & 如果高有變大, 則新 長出來的地方用此 p... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:長 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...& {\em p} & 如果高有變大, 則新長 出來的地方用此 pixe... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...\em p} & 如果高有變大, 則新長出 來的地方用此 pixel... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ... p} & 如果高有變大, 則新長出來 的地方用此 pixel填... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ... & 如果高有變大, 則新長出來的 地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:地 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...如果高有變大, 則新長出來的地 方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...果高有變大, 則新長出來的地方 用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...高有變大, 則新長出來的地方用 此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...有變大, 則新長出來的地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:填 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ..., 則新長出來的地方用此 pixel填 補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:補 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 ...新長出來的地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 477 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 新 的高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 新的 高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 新的高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 回 傳矩陣形式 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 回傳 矩陣形式 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:矩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 回傳矩 陣形式 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 回傳矩陣 形式 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 回傳矩陣形 式 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 回傳矩陣形式 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.508 直 接設定 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.508 直接 設定 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.508 直接設 定 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.508 直接設定 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 回 傳矩陣形式 (non-\/constant form) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 回傳 矩陣形式 (non-\/constant form) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:矩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 回傳矩 陣形式 (non-\/constant form) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 回傳矩陣 形式 (non-\/constant form) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 回傳矩陣形 式 (non-\/constant form) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 回傳矩陣形式 (non-\/constant form) Your command was ignored. Type I to replace it with another command, or to continue without it. [39] ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.587 取 得 (y, x) 的pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.587 取得 (y, x) 的pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.587 取得 (y, x) 的 pixel Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 596 [][][] [] ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 該 pixel 的 constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 該pixel 的 constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.614 修 改 (y, x) 的pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.614 修改 (y, x) 的pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.614 修改 (y, x) 的 pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.622 \mbox{\tt in} & {\em p} & 指 定的顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.622 \mbox{\tt in} & {\em p} & 指定 的顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.622 \mbox{\tt in} & {\em p} & 指定的 顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:顏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.622 \mbox{\tt in} & {\em p} & 指定的顏 色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.622 \mbox{\tt in} & {\em p} & 指定的顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 625 [][][] [] ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.626 該 pixel 的 constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.626 該pixel 的 constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.645 區 塊修改 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:塊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.645 區塊 修改 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.645 區塊修 改 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.645 區塊修改 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一 口氣將一個矩形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:口 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口 氣將一個矩形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:氣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣 將一個矩形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將 一個矩形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一 個矩形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個 矩形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:矩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩 形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩形 區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩形區 塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:塊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩形區塊 修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩形區塊修 改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩形區塊修改 成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩形區塊修改成 指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 一口氣將一個矩形區塊修改成指 定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 ...氣將一個矩形區塊修改成指定 的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 ...將一個矩形區塊修改成指定的 顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:顏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 ...一個矩形區塊修改成指定的顏 色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.647 ...個矩形區塊修改成指定的顏色 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.651 \mbox{\tt in} & {\em y\-First} & y軸 方向最小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.651 \mbox{\tt in} & {\em y\-First} & y軸方 向最小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.651 \mbox{\tt in} & {\em y\-First} & y軸方向 最小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.651 ...\tt in} & {\em y\-First} & y軸方向最 小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.651 ... in} & {\em y\-First} & y軸方向最小 值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.651 ...} & {\em y\-First} & y軸方向最小值 (含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.651 ... {\em y\-First} & y軸方向最小值(含 ) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.653 \mbox{\tt in} & {\em y\-Last} & y軸 方向最大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.653 \mbox{\tt in} & {\em y\-Last} & y軸方 向最大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.653 \mbox{\tt in} & {\em y\-Last} & y軸方向 最大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.653 ...{\tt in} & {\em y\-Last} & y軸方向最 大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.653 ...t in} & {\em y\-Last} & y軸方向最大 值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.653 ...n} & {\em y\-Last} & y軸方向最大值 (含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.653 ...& {\em y\-Last} & y軸方向最大值(含 ) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 \mbox{\tt in} & {\em x\-First} & x軸 方向最小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 \mbox{\tt in} & {\em x\-First} & x軸方 向最小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 \mbox{\tt in} & {\em x\-First} & x軸方向 最小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 ...\tt in} & {\em x\-First} & x軸方向最 小值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 ... in} & {\em x\-First} & x軸方向最小 值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 ...} & {\em x\-First} & x軸方向最小值 (含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 ... {\em x\-First} & x軸方向最小值(含 ) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:軸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.657 \mbox{\tt in} & {\em x\-Last} & x軸 方向最大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.657 \mbox{\tt in} & {\em x\-Last} & x軸方 向最大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.657 \mbox{\tt in} & {\em x\-Last} & x軸方向 最大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.657 ...{\tt in} & {\em x\-Last} & x軸方向最 大值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.657 ...t in} & {\em x\-Last} & x軸方向最大 值(含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.657 ...n} & {\em x\-Last} & x軸方向最大值 (含) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.657 ...& {\em x\-Last} & x軸方向最大值(含 ) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.659 \mbox{\tt in} & {\em p} & 指 定的顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.659 \mbox{\tt in} & {\em p} & 指定 的顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.659 \mbox{\tt in} & {\em p} & 指定的 顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:顏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.659 \mbox{\tt in} & {\em p} & 指定的顏 色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.659 \mbox{\tt in} & {\em p} & 指定的顏色 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 662 [][][] [] ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.663 無 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.680 將 資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.680 將資 料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.680 將資料 讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.680 將資料讀 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.680 將資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. [40] Underfull \hbox (badness 10000) detected at line 682 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未 完成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完 成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完成 , 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完成, 輸 入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完成, 輸入 參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完成, 輸入參 數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完成, 輸入參數 fg 無 用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.683 未完成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.719 全 部重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.719 全部 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.719 全部重 設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.719 全部重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.723 \mbox{\tt in} & {\em h} & 高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.725 \mbox{\tt in} & {\em w} & 寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 \mbox{\tt in} & {\em p} & 預 設pixel \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.727 \mbox{\tt in} & {\em p} & 預設 pixel \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 730 [][][] [] ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 無 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回 傳高度乘以寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回傳 高度乘以寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回傳高 度乘以寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回傳高度 乘以寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乘 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回傳高度乘 以寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回傳高度乘以 寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回傳高度乘以寬 度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.746 回傳高度乘以寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.763 修 改寬高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.763 修改 寬高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.763 修改寬 高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.763 修改寬高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.767 \mbox{\tt in} & {\em h2} & 新 的高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.767 \mbox{\tt in} & {\em h2} & 新的 高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.767 \mbox{\tt in} & {\em h2} & 新的高 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.769 \mbox{\tt in} & {\em w2} & 新 的寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.769 \mbox{\tt in} & {\em w2} & 新的 寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.769 \mbox{\tt in} & {\em w2} & 新的寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 \mbox{\tt in} & {\em p} & 如 果寬or高有變大, 則新長出來的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 \mbox{\tt in} & {\em p} & 如果 寬or高有變大, 則新長出來的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 \mbox{\tt in} & {\em p} & 如果寬 or高有變大, 則新長出來的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 \mbox{\tt in} & {\em p} & 如果寬or高 有變大, 則新長出來的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 \mbox{\tt in} & {\em p} & 如果寬or高有 變大, 則新長出來的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...\tt in} & {\em p} & 如果寬or高有變 大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ... in} & {\em p} & 如果寬or高有變大 , 則新長出來的地方... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ... & {\em p} & 如果寬or高有變大, 則 新長出來的地方用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...{\em p} & 如果寬or高有變大, 則新 長出來的地方用此 p... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:長 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...m p} & 如果寬or高有變大, 則新長 出來的地方用此 pixe... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...} & 如果寬or高有變大, 則新長出 來的地方用此 pixel... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ... 如果寬or高有變大, 則新長出來 的地方用此 pixel填... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...果寬or高有變大, 則新長出來的 地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:地 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...寬or高有變大, 則新長出來的地 方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...or高有變大, 則新長出來的地方 用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...高有變大, 則新長出來的地方用 此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...有變大, 則新長出來的地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:填 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ..., 則新長出來的地方用此 pixel填 補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:補 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.771 ...新長出來的地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 774 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.775 新 的size Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.775 新的 size Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.790 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.790 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.790 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 792 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.793 {\ttfamily std\-::string} 形 式的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.793 {\ttfamily std\-::string} 形式 的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.793 {\ttfamily std\-::string} 形式的 typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.812 回 傳寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.812 回傳 寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.812 回傳寬 度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.812 回傳寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.828 修 改寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.828 修改 寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.828 修改寬 度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.828 修改寬度 Your command was ignored. Type I to replace it with another command, or to continue without it. [41] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.832 \mbox{\tt in} & {\em w2} & 新 的寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.832 \mbox{\tt in} & {\em w2} & 新的 寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.832 \mbox{\tt in} & {\em w2} & 新的寬 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 \mbox{\tt in} & {\em p} & 如 果寬有變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 \mbox{\tt in} & {\em p} & 如果 寬有變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 \mbox{\tt in} & {\em p} & 如果寬 有變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 \mbox{\tt in} & {\em p} & 如果寬有 變大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 \mbox{\tt in} & {\em p} & 如果寬有變 大, 則新長出來的地... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...x{\tt in} & {\em p} & 如果寬有變大 , 則新長出來的地方... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ... in} & {\em p} & 如果寬有變大, 則 新長出來的地方用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...} & {\em p} & 如果寬有變大, 則新 長出來的地方用此 p... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:長 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...& {\em p} & 如果寬有變大, 則新長 出來的地方用此 pixe... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...\em p} & 如果寬有變大, 則新長出 來的地方用此 pixel... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ... p} & 如果寬有變大, 則新長出來 的地方用此 pixel填... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ... & 如果寬有變大, 則新長出來的 地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:地 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...如果寬有變大, 則新長出來的地 方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...果寬有變大, 則新長出來的地方 用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...寬有變大, 則新長出來的地方用 此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...有變大, 則新長出來的地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:填 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ..., 則新長出來的地方用此 pixel填 補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:補 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.834 ...新長出來的地方用此 pixel填補 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 837 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.838 新 的寬 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.838 新的 寬 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.838 新的寬 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.855 將 資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.855 將資 料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.855 將資料 寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.855 將資料寫 入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.855 將資料寫入 檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.855 將資料寫入檔 案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.855 將資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 857 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未 完成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完 成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完成 , 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完成, 輸 入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完成, 輸入 參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完成, 輸入參 數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完成, 輸入參數 fg 無 用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.858 未完成, 輸入參數 fg 無用 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1BundleAdjustment.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1BundleAdjustment.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1BundleAdjustment.pdf used on input line 1 1. (pdftex.def) Requested size: 166.44632pt x 85.35826pt. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 58. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 58. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 58. [42 <./classmeow_1_1BundleAdjustment.pdf>]) (./classmeow_1_1BundleAdjustment__LM.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1BundleAdjustment__LM.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1BundleAdjustment__LM.pdf used on input li ne 11. (pdftex.def) Requested size: 166.44632pt x 85.35826pt. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 複 製, 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 複製 , 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...DoxyCompactList}\small\item\em 複製, 預 設使用operator= \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...yCompactList}\small\item\em 複製, 預設 使用operator= \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...mpactList}\small\item\em 複製, 預設使 用operator= \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ctList}\small\item\em 複製, 預設使用 operator= \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. [43 <./classmeow_1_1BundleAdjustment__LM.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 88. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 88. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 88. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 複 製, 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 複製 , 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 複製, 預 設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 複製, 預設 使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 複製, 預設使 用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 複製, 預設使用 operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.150 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.150 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.150 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.150 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 153 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.173 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. [44] ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.278 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.282 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.282 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.284 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.284 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.284 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.284 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.284 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.286 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.286 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.286 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.286 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.286 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.286 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 289 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.290 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.290 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.290 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.290 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.290 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1Camera.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1Camera.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1Camera.pdf used on input line 16. (pdftex.def) Requested size: 108.82764pt x 56.9055pt. [45] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 參 照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 參照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 取 得 photo \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 取得 photo \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 取 得 photo (non-\/constant) \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 取得 photo (non-\/constant) \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 設 定 photo \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 設定 photo \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 取 得rotation \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 取得 rotation \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 取 得rotation (non-\/constant) \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 取得 rotation (non-\/constant) \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 設 定rotation \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 設定 rotation \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 取 得所有\-Fixed\-Point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 取得 所有\-Fixed\-Point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...n{DoxyCompactList}\small\item\em 取得所 有\-Fixed\-Point \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...oxyCompactList}\small\item\em 取得所有 \-Fixed\-Point \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 取 得所有\-Fixed\-Point(non-\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 取得 所有\-Fixed\-Point(non-\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...n{DoxyCompactList}\small\item\em 取得所 有\-Fixed\-Point(non-\/co... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...oxyCompactList}\small\item\em 取得所有 \-Fixed\-Point(non-\/const... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 設 定\-Fixed\-Point \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 設定 \-Fixed\-Point \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 取 得編號為i的fixed points 2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 取得 編號為i的fixed points 2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...n{DoxyCompactList}\small\item\em 取得編 號為i的fixed points 2d ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...oxyCompactList}\small\item\em 取得編號 為i的fixed points 2d \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...CompactList}\small\item\em 取得編號為 i的fixed points 2d \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...actList}\small\item\em 取得編號為i的 fixed points 2d \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 詢 問某點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 詢問 某點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...n{DoxyCompactList}\small\item\em 詢問某 點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...oxyCompactList}\small\item\em 詢問某點 是否在底片範圍內 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...CompactList}\small\item\em 詢問某點是 否在底片範圍內 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...pactList}\small\item\em 詢問某點是否 在底片範圍內 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...tList}\small\item\em 詢問某點是否在 底片範圍內 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...st}\small\item\em 詢問某點是否在底 片範圍內 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...\small\item\em 詢問某點是否在底片 範圍內 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...all\item\em 詢問某點是否在底片範 圍內 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...\item\em 詢問某點是否在底片範圍 內 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...em\em 詢問某點是否在底片範圍內 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 取 得底片color \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 取得 底片color \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...n{DoxyCompactList}\small\item\em 取得底 片color \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...oxyCompactList}\small\item\em 取得底片 color \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 將 資料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 將資 料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...n{DoxyCompactList}\small\item\em 將資料 寫入檔案 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...oxyCompactList}\small\item\em 將資料寫 入檔案 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...CompactList}\small\item\em 將資料寫入 檔案 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...pactList}\small\item\em 將資料寫入檔 案 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...tList}\small\item\em 將資料寫入檔案 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 將 資料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 將資 料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...n{DoxyCompactList}\small\item\em 將資料 讀入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...oxyCompactList}\small\item\em 將資料讀 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...CompactList}\small\item\em 將資料讀入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em new一 個自己 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...n{DoxyCompactList}\small\item\em new一個 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...oxyCompactList}\small\item\em new一個自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...CompactList}\small\item\em new一個自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [46 <./classmeow_1_1Camera.pdf>] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 實 際上就是一個 {\ttfamily \hyperlink{classmeow_1_1Photo}{Photo}}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:際 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 實際 上就是一個 {\ttfamily \hyperlink{classmeow_1_1Photo}{Photo}}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 實際上 就是一個 {\ttfamily \hyperlink{classmeow_1_1Photo}{Photo}}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 實際上就 是一個 {\ttfamily \hyperlink{classmeow_1_1Photo}{Photo}}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 實際上就是 一個 {\ttfamily \hyperlink{classmeow_1_1Photo}{Photo}}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 實際上就是一 個 {\ttfamily \hyperlink{classmeow_1_1Photo}{Photo}}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 實際上就是一個 {\ttfamily \hyperlink{classmeow_1_1Photo}{Photo}}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...\hyperlink{classmeow_1_1Photo}{Photo}} 加 上一個 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...perlink{classmeow_1_1Photo}{Photo}} 加上 一個 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...link{classmeow_1_1Photo}{Photo}} 加上一 個 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...k{classmeow_1_1Photo}{Photo}} 加上一個 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...assmeow_1_1Rotation3D}{Rotation3\-D}}. 另 外附有 fixed\-Point, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...meow_1_1Rotation3D}{Rotation3\-D}}. 另外 附有 fixed\-Point, 可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:附 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...w_1_1Rotation3D}{Rotation3\-D}}. 另外附 有 fixed\-Point, 可以... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ..._1Rotation3D}{Rotation3\-D}}. 另外附有 fixed\-Point, 可以用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...tion3\-D}}. 另外附有 fixed\-Point, 可 以用來定位時參考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...n3\-D}}. 另外附有 fixed\-Point, 可以 用來定位時參考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...-D}}. 另外附有 fixed\-Point, 可以用 來定位時參考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...}. 另外附有 fixed\-Point, 可以用來 定位時參考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...另外附有 fixed\-Point, 可以用來定 位時參考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:位 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...外附有 fixed\-Point, 可以用來定位 時參考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...附有 fixed\-Point, 可以用來定位時 參考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...有 fixed\-Point, 可以用來定位時參 考 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:考 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ... fixed\-Point, 可以用來定位時參考 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 86 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 142. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 142. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 142. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 取 得底片color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 取得 底片color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 取得底 片color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 取得底片 color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 輸 入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 輸入 型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 輸入型 別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:別 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 輸入型別 是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 輸入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:事 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...}{Obj\-Base}} {\ttfamily const$\ast$} 事 實上這個method就只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...bj\-Base}} {\ttfamily const$\ast$} 事實 上這個method就只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...-Base}} {\ttfamily const$\ast$} 事實上 這個method就只是幫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...se}} {\ttfamily const$\ast$} 事實上這 個method就只是幫忙... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...} {\ttfamily const$\ast$} 事實上這個 method就只是幫忙轉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...ily const$\ast$} 事實上這個method就 只是幫忙轉型然後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ... const$\ast$} 事實上這個method就只 是幫忙轉型然後呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...nst$\ast$} 事實上這個method就只是 幫忙轉型然後呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...$\ast$} 事實上這個method就只是幫 忙轉型然後呼叫原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...st$} 事實上這個method就只是幫忙 轉型然後呼叫原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:轉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...} 事實上這個method就只是幫忙轉 型然後呼叫原本的{\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...實上這個method就只是幫忙轉型 然後呼叫原本的{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:然 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...上這個method就只是幫忙轉型然 後呼叫原本的{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...這個method就只是幫忙轉型然後 呼叫原本的{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...個method就只是幫忙轉型然後呼 叫原本的{\ttfamily cop... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...method就只是幫忙轉型然後呼叫 原本的{\ttfamily copy\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...ethod就只是幫忙轉型然後呼叫原 本的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...od就只是幫忙轉型然後呼叫原本 的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 ...只是幫忙轉型然後呼叫原本的 {\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. [47] [48] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.199 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.199 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.199 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.199 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 202 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.222 new一 個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.222 new一個 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.222 new一個自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.222 new一個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 224 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 一 個new出來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 一個 new出來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 一個new出 來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 一個new出來 的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 一個new出來的 pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.244 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.244 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.244 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 246 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ...r} {\ttfamily const{\ttfamily $\ast$} 形 式的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ...{\ttfamily const{\ttfamily $\ast$} 形式 的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ...tfamily const{\ttfamily $\ast$} 形式的 typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 取 得編號為i的fixed points 2d Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 取得 編號為i的fixed points 2d Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 取得編 號為i的fixed points 2d Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 取得編號 為i的fixed points 2d Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 取得編號為 i的fixed points 2d Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.266 取得編號為i的 fixed points 2d Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 取 得所有\-Fixed\-Point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 取得 所有\-Fixed\-Point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 取得所 有\-Fixed\-Point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 取得所有 \-Fixed\-Point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.296 設 定\-Fixed\-Point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.296 設定 \-Fixed\-Point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 取 得所有\-Fixed\-Point(non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 取得 所有\-Fixed\-Point(non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 取得所 有\-Fixed\-Point(non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 取得所有 \-Fixed\-Point(non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢 問某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問 某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某 點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點 是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是 否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是否 在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是否在 底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是否在底 片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是否在底片 範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是否在底片範 圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是否在底片範圍 內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 詢問某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.356 取 得 photo Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.356 取得 photo Your command was ignored. Type I to replace it with another command, or to continue without it. [49] ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 設 定 photo Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 設定 photo Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 取 得 photo (non-\/constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 取得 photo (non-\/constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將 資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將資 料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將資料 讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將資料讀 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 405 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.406 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.406 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.406 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 參 照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 參照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.440 取 得rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.440 取得 rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.455 設 定rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.455 設定 rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.470 取 得rotation (non-\/constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.470 取得 rotation (non-\/constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.485 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.485 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.485 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 487 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.488 {\ttfamily std\-::string} 形 式的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.488 {\ttfamily std\-::string} 形式 的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.488 {\ttfamily std\-::string} 形式的 typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.509 將 資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.509 將資 料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.509 將資料 寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.509 將資料寫 入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.509 將資料寫入 檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.509 將資料寫入檔 案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.509 將資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. [50] Underfull \hbox (badness 10000) detected at line 511 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.512 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.512 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.512 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1Color3__Space.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以 三個channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三 個channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個 channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以三個channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以 三個channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三 個channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個 channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 以三個channel所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 65 [][][] [] [51] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 105. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 105. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 105. [52]) (./classmeow_1_1DisjointSet.tex ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用 來維護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來 維護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維 護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護 一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一 堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一堆 互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:互 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一堆互 斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斥 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一堆互斥 集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一堆互斥集 的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一堆互斥集的 資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一堆互斥集的資 訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 用來維護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 回 傳指定的number所在的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 回傳 指定的number所在的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...n{DoxyCompactList}\small\item\em 回傳指 定的number所在的 {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...oxyCompactList}\small\item\em 回傳指定 的number所在的 {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...CompactList}\small\item\em 回傳指定的 number所在的 {\bfseries... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...st}\small\item\em 回傳指定的number所 在的 {\bfseries 集合... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...\small\item\em 回傳指定的number所在 的 {\bfseries 集合的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...all\item\em 回傳指定的number所在的 {\bfseries 集合的編... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...傳指定的number所在的 {\bfseries 集 合的編號} \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...指定的number所在的 {\bfseries 集合 的編號} \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...定的number所在的 {\bfseries 集合的 編號} \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...的number所在的 {\bfseries 集合的編 號} \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...number所在的 {\bfseries 集合的編號 } \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 回 傳總element數 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 回傳 總element數 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:總 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...n{DoxyCompactList}\small\item\em 回傳總 element數 \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...actList}\small\item\em 回傳總element數 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 重 設 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 重設 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 合 併 \end{DoxyCompactList}\end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 合併 \end{DoxyCompactList}\end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用 來維護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來 維護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維 護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護 一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一 堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一堆 互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:互 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一堆互 斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斥 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一堆互斥 集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一堆互斥集 的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一堆互斥集的 資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一堆互斥集的資 訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 用來維護一堆互斥集的資訊 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...assmeow_1_1DisjointSet}{Disjoint\-Set} 是 個 {\bfseries 輕量級\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...meow_1_1DisjointSet}{Disjoint\-Set} 是個 {\bfseries 輕量級\-Dat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輕 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...tSet}{Disjoint\-Set} 是個 {\bfseries 輕 量級\-Data} {\bfseries D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...t}{Disjoint\-Set} 是個 {\bfseries 輕量 級\-Data} {\bfseries Dtru... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:級 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...Disjoint\-Set} 是個 {\bfseries 輕量級 \-Data} {\bfseries Dtructu... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...量級\-Data} {\bfseries Dtructure}, 用 來維護一堆互斥集... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...級\-Data} {\bfseries Dtructure}, 用來 維護一堆互斥集的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...\-Data} {\bfseries Dtructure}, 用來維 護一堆互斥集的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...-Data} {\bfseries Dtructure}, 用來維護 一堆互斥集的資訊. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...ta} {\bfseries Dtructure}, 用來維護一 堆互斥集的資訊. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... {\bfseries Dtructure}, 用來維護一堆 互斥集的資訊. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:互 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...bfseries Dtructure}, 用來維護一堆互 斥集的資訊. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斥 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...eries Dtructure}, 用來維護一堆互斥 集的資訊. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...es Dtructure}, 用來維護一堆互斥集 的資訊. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...Dtructure}, 用來維護一堆互斥集的 資訊. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...ucture}, 用來維護一堆互斥集的資 訊. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...ure}, 用來維護一堆互斥集的資訊 . \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 相 關資料可參考 \href{http://www.csie.ntnu.edu.tw/~u91029/Disjoin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:關 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 相關 資料可參考 \href{http://www.csie.ntnu.edu.tw/~u91029/Disjoin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 相關資 料可參考 \href{http://www.csie.ntnu.edu.tw/~u91029/Disjoin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 相關資料 可參考 \href{http://www.csie.ntnu.edu.tw/~u91029/Disjoin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 相關資料可 參考 \href{http://www.csie.ntnu.edu.tw/~u91029/Disjoin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 相關資料可參 考 \href{http://www.csie.ntnu.edu.tw/~u91029/Disjoin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:考 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 相關資料可參考 \href{http://www.csie.ntnu.edu.tw/~u91029/Disjoin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:演 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...9/DisjointSets.html}{\tt 演算法筆記 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...9/DisjointSets.html}{\tt 演算法筆記 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:法 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...9/DisjointSets.html}{\tt 演算法筆記 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:筆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...9/DisjointSets.html}{\tt 演算法筆記 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:記 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...9/DisjointSets.html}{\tt 演算法筆記 } Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 38 [][][] [] ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時 間複雜度 {\bfseries 非常快} 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時間 複雜度 {\bfseries 非常快} 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時間複 雜度 {\bfseries 非常快} 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時間複雜 度 {\bfseries 非常快} 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時間複雜度 {\bfseries 非常快} 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:非 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時間複雜度 {\bfseries 非 常快} 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:常 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時間複雜度 {\bfseries 非常 快} 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \item 時間複雜度 {\bfseries 非常快 } 表示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ... 時間複雜度 {\bfseries 非常快} 表 示它真的算的超級... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:示 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...間複雜度 {\bfseries 非常快} 表示 它真的算的超級快, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...複雜度 {\bfseries 非常快} 表示它 真的算的超級快, 可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:真 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...雜度 {\bfseries 非常快} 表示它真 的算的超級快, 可以... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...度 {\bfseries 非常快} 表示它真的 算的超級快, 可以視... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ... {\bfseries 非常快} 表示它真的算 的超級快, 可以視為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...\bfseries 非常快} 表示它真的算的 超級快, 可以視為常... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:超 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...series 非常快} 表示它真的算的超 級快, 可以視為常數... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:級 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...ies 非常快} 表示它真的算的超級 快, 可以視為常數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ... 非常快} 表示它真的算的超級快 , 可以視為常數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...快} 表示它真的算的超級快, 可 以視為常數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...} 表示它真的算的超級快, 可以 視為常數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:視 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ... 表示它真的算的超級快, 可以視 為常數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...示它真的算的超級快, 可以視為 常數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:常 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...它真的算的超級快, 可以視為常 數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...真的算的超級快, 可以視為常數 時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...的算的超級快, 可以視為常數時 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...算的超級快, 可以視為常數時間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \item 預 設值所有 {\itshape number} 所在的集合的編號就是 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \item 預設 值所有 {\itshape number} 所在的集合的編號就是 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \item 預設值 所有 {\itshape number} 所在的集合的編號就是 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \item 預設值所 有 {\itshape number} 所在的集合的編號就是 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \item 預設值所有 {\itshape number} 所在的集合的編號就是 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \item 預設值所有 {\itshape number} 所 在的集合的編號就是 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...m 預設值所有 {\itshape number} 所在 的集合的編號就是 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...設值所有 {\itshape number} 所在的 集合的編號就是 {\it... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...值所有 {\itshape number} 所在的集 合的編號就是 {\itsha... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...所有 {\itshape number} 所在的集合 的編號就是 {\itshape ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...有 {\itshape number} 所在的集合的 編號就是 {\itshape num... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ... {\itshape number} 所在的集合的編 號就是 {\itshape number... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...{\itshape number} 所在的集合的編號 就是 {\itshape number} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...tshape number} 所在的集合的編號就 是 {\itshape number} 本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ape number} 所在的集合的編號就是 {\itshape number} 本身,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...合的編號就是 {\itshape number} 本 身, 即沒有任兩個數... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...的編號就是 {\itshape number} 本身 , 即沒有任兩個數在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...編號就是 {\itshape number} 本身, 即 沒有任兩個數在同... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...號就是 {\itshape number} 本身, 即沒 有任兩個數在同一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...就是 {\itshape number} 本身, 即沒有 任兩個數在同一個se... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:任 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...是 {\itshape number} 本身, 即沒有任 兩個數在同一個set... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ... {\itshape number} 本身, 即沒有任兩 個數在同一個set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...itshape number} 本身, 即沒有任兩個 數在同一個set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...hape number} 本身, 即沒有任兩個數 在同一個set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...e number} 本身, 即沒有任兩個數在 同一個set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...umber} 本身, 即沒有任兩個數在同 一個set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...er} 本身, 即沒有任兩個數在同一 個set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ... 本身, 即沒有任兩個數在同一個 set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ..., 即沒有任兩個數在同一個set裡 面 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:面 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...即沒有任兩個數在同一個set裡面 Your command was ignored. Type I to replace it with another command, or to continue without it. [53] Underfull \hbox (badness 10000) detected at line 45 [][][] [] ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 \mbox{\tt in} & {\em n} & elements數 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 將 另一個 {\ttfamily \hyperlink{classmeow_1_1DisjointSet}{Disjoint\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 將另 一個 {\ttfamily \hyperlink{classmeow_1_1DisjointSet}{Disjoint\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 將另一 個 {\ttfamily \hyperlink{classmeow_1_1DisjointSet}{Disjoint\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 將另一個 {\ttfamily \hyperlink{classmeow_1_1DisjointSet}{Disjoint\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...smeow_1_1DisjointSet}{Disjoint\-Set}} 原 封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:封 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...ow_1_1DisjointSet}{Disjoint\-Set}} 原封 不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...1_1DisjointSet}{Disjoint\-Set}} 原封不 動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:動 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...DisjointSet}{Disjoint\-Set}} 原封不動 的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...jointSet}{Disjoint\-Set}} 原封不動的 複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...ntSet}{Disjoint\-Set}} 原封不動的複 製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...et}{Disjoint\-Set}} 原封不動的複製 過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...{Disjoint\-Set}} 原封不動的複製過 來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...sjoint\-Set}} 原封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.105 \mbox{\tt in} & {\em dsj} & 另 一個 {\ttfamily \hyperlink{classmeow... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.105 \mbox{\tt in} & {\em dsj} & 另一 個 {\ttfamily \hyperlink{classmeow... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.105 \mbox{\tt in} & {\em dsj} & 另一個 {\ttfamily \hyperlink{classmeow... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.125 合 併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.125 合併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 將 {\itshape number1} 所在的集合 跟 {\bfseries number2} 所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 將 {\itshape number1} 所 在的集合 跟 {\bfseries number2} 所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 將 {\itshape number1} 所在 的集合 跟 {\bfseries number2} 所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 將 {\itshape number1} 所在的 集合 跟 {\bfseries number2} 所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 將 {\itshape number1} 所在的集 合 跟 {\bfseries number2} 所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 將 {\itshape number1} 所在的集合 跟 {\bfseries number2} 所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 將 {\itshape number1} 所在的集合 跟 {\bfseries number2} 所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...在的集合 跟 {\bfseries number2} 所 在的集合 {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...的集合 跟 {\bfseries number2} 所在 的集合 {\bfseries 合... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...集合 跟 {\bfseries number2} 所在的 集合 {\bfseries 合併},... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...合 跟 {\bfseries number2} 所在的集 合 {\bfseries 合併}, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ... 跟 {\bfseries number2} 所在的集合 {\bfseries 合併}, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...s number2} 所在的集合 {\bfseries 合 併}, 並回傳合併後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...umber2} 所在的集合 {\bfseries 合併 }, 並回傳合併後新... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...} 所在的集合 {\bfseries 合併}, 並 回傳合併後新的集... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...在的集合 {\bfseries 合併}, 並回 傳合併後新的集合... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...的集合 {\bfseries 合併}, 並回傳 合併後新的集合的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...集合 {\bfseries 合併}, 並回傳合 併後新的集合的編... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...合 {\bfseries 合併}, 並回傳合併 後新的集合的編號. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ... {\bfseries 合併}, 並回傳合併後 新的集合的編號. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...{\bfseries 合併}, 並回傳合併後新 的集合的編號. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...fseries 合併}, 並回傳合併後新的 集合的編號. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...ries 合併}, 並回傳合併後新的集 合的編號. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...s 合併}, 並回傳合併後新的集合 的編號. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...併}, 並回傳合併後新的集合的 編號. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...}, 並回傳合併後新的集合的編 號. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ..., 並回傳合併後新的集合的編號 . \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時 間複雜度{\bfseries 非常快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時間 複雜度{\bfseries 非常快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時間複 雜度{\bfseries 非常快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時間複雜 度{\bfseries 非常快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時間複雜度 {\bfseries 非常快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:非 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時間複雜度{\bfseries 非 常快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:常 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時間複雜度{\bfseries 非常 快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 時間複雜度{\bfseries 非常快 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.132 \mbox{\tt in} & {\em a} & 即 上述{\itshape number1} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.132 \mbox{\tt in} & {\em a} & 即上 述{\itshape number1} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:述 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.132 \mbox{\tt in} & {\em a} & 即上述 {\itshape number1} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 \mbox{\tt in} & {\em b} & 即 上述{\itshape number2} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 \mbox{\tt in} & {\em b} & 即上 述{\itshape number2} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:述 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 \mbox{\tt in} & {\em b} & 即上述 {\itshape number2} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 137 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 新 的編號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 新的 編號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 新的編 號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 新的編號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重 設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重設 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清 空, 並且設定總集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空 , 並且設定總集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並 且設定總集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且 設定總集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設 定總集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設定 總集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:總 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設定總 集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設定總集 合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設定總集合 大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設定總集合大 小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設定總集合大小 為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 清空, 並且設定總集合大小為 {\itshape n} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 \mbox{\tt in} & {\em n} & 重 新設定的集合大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 \mbox{\tt in} & {\em n} & 重新 設定的集合大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 \mbox{\tt in} & {\em n} & 重新設 定的集合大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 \mbox{\tt in} & {\em n} & 重新設定 的集合大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 \mbox{\tt in} & {\em n} & 重新設定的 集合大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 ...x{\tt in} & {\em n} & 重新設定的集 合大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 ...tt in} & {\em n} & 重新設定的集合 大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 ...in} & {\em n} & 重新設定的集合大 小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 ... & {\em n} & 重新設定的集合大小 {\itshape n} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 162 [][][] [] ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 無 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回 傳指定的number所在的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回傳 指定的number所在的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回傳指 定的number所在的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回傳指定 的number所在的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回傳指定的 number所在的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回傳指定的number所 在的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回傳指定的number所在 的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 回傳指定的number所在的 {\bfseries 集合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 ...指定的number所在的 {\bfseries 集 合的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 ...定的number所在的 {\bfseries 集合 的編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 ...的number所在的 {\bfseries 集合的 編號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 ...number所在的 {\bfseries 集合的編 號} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.178 ...umber所在的 {\bfseries 集合的編號 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時 間複雜度 {\bfseries 超級快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時間 複雜度 {\bfseries 超級快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時間複 雜度 {\bfseries 超級快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時間複雜 度 {\bfseries 超級快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時間複雜度 {\bfseries 超級快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:超 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時間複雜度 {\bfseries 超 級快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:級 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時間複雜度 {\bfseries 超級 快} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 時間複雜度 {\bfseries 超級快 } Your command was ignored. Type I to replace it with another command, or to continue without it. [54] ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.184 \mbox{\tt in} & {\em a} & 指 定的number \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.184 \mbox{\tt in} & {\em a} & 指定 的number \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.184 \mbox{\tt in} & {\em a} & 指定的 number \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 187 [][][] [] ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 集 合的編號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 集合 的編號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 集合的 編號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:編 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 集合的編 號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 集合的編號 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 回 傳總element數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 回傳 總element數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:總 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 回傳總 element數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 回傳總element數 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 205 [][][] [] ! Package inputenc Error: Unicode char \u8:總 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 總 element數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 總element數 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1SplayTree__Range_1_1Element.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 類 似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ttfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...amily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ly stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...stl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...} 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 比 對兩者是否為指向同一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 比對 兩者是否為指向同一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...n{DoxyCompactList}\small\item\em 比對兩 者是否為指向同一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...oxyCompactList}\small\item\em 比對兩者 是否為指向同一個\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...CompactList}\small\item\em 比對兩者是 否為指向同一個\-Ent... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...pactList}\small\item\em 比對兩者是否 為指向同一個\-Entry ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...tList}\small\item\em 比對兩者是否為 指向同一個\-Entry \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...st}\small\item\em 比對兩者是否為指 向同一個\-Entry \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\small\item\em 比對兩者是否為指向 同一個\-Entry \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...all\item\em 比對兩者是否為指向同 一個\-Entry \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\item\em 比對兩者是否為指向同一 個\-Entry \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...em\em 比對兩者是否為指向同一個 \-Entry \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 重 導至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 重導 至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...n{DoxyCompactList}\small\item\em 重導至 {\ttfamily std\-::pair$<$K... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 重 導至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 重導 至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...n{DoxyCompactList}\small\item\em 重導至 {\ttfamily std\-::pair$<$K... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 類 似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...tfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...mily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...y stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...tl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ... 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用 來當作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來 當作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當 作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作 回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回 傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳 資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資 料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料 的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料的 媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:媒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料的媒 介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:介 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. [55] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 91. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 91. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 91. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 135. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 135. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 135. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 重 導至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 重導 至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 重導至 {\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 150. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 150. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重 導至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重導 至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重導至 {\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比 對兩者是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對 兩者是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩 者是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者 是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是 否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否 為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為 指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指 向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向 同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向同 一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向同一 個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向同一個 \-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. [56]) (./classmeow_1_1SplayTree_1_1Element.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 類 似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ttfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...amily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ly stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...stl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...} 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 比 對兩者是否為指向同一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 比對 兩者是否為指向同一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...n{DoxyCompactList}\small\item\em 比對兩 者是否為指向同一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...oxyCompactList}\small\item\em 比對兩者 是否為指向同一個\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...CompactList}\small\item\em 比對兩者是 否為指向同一個\-Ent... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...pactList}\small\item\em 比對兩者是否 為指向同一個\-Entry ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...tList}\small\item\em 比對兩者是否為 指向同一個\-Entry \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...st}\small\item\em 比對兩者是否為指 向同一個\-Entry \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\small\item\em 比對兩者是否為指向 同一個\-Entry \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...all\item\em 比對兩者是否為指向同 一個\-Entry \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\item\em 比對兩者是否為指向同一 個\-Entry \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...em\em 比對兩者是否為指向同一個 \-Entry \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 重 導至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 重導 至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...n{DoxyCompactList}\small\item\em 重導至 {\ttfamily std\-::pair$<$K... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 重 導至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 重導 至{\ttfamily std\-::pair$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...n{DoxyCompactList}\small\item\em 重導至 {\ttfamily std\-::pair$<$K... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 類 似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不過這邊叫做{\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...tfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...mily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...y stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...tl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ... 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用 來當作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來 當作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當 作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作 回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回 傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳 資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資 料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料 的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料的 媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:媒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料的媒 介 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:介 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 用來當作回傳資料的媒介 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 91. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 91. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 91. [57] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 135. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 135. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 135. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 重 導至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 重導 至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.138 重導至 {\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 150. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 150. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重 導至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:導 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重導 至{\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 重導至 {\ttfamily std\-::pair$<$Key} {\ttfamily const\&},{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比 對兩者是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對 兩者是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩 者是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者 是否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是 否為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否 為指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為 指向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指 向同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向 同一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向同 一個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向同一 個\-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.198 比對兩者是否為指向同一個 \-Entry Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1Eye.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一 個 {\ttfamily \hyperlink{classmeow_1_1Camera}{Camera}} 加上一個o... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個 {\ttfamily \hyperlink{classmeow_1_1Camera}{Camera}} 加上一個o... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...hyperlink{classmeow_1_1Camera}{Camera}} 加 上一個offset transforma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...erlink{classmeow_1_1Camera}{Camera}} 加上 一個offset transformation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ink{classmeow_1_1Camera}{Camera}} 加上一 個offset transformation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{classmeow_1_1Camera}{Camera}} 加上一個 offset transformation Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1Eye.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1Eye.pdf used on input line 16. (pdftex.def) Requested size: 93.18236pt x 56.9055pt. [58] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 將 資料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 將資 料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...n{DoxyCompactList}\small\item\em 將資料 寫入檔案 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...oxyCompactList}\small\item\em 將資料寫 入檔案 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...CompactList}\small\item\em 將資料寫入 檔案 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...pactList}\small\item\em 將資料寫入檔 案 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...tList}\small\item\em 將資料寫入檔案 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 將 資料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 將資 料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...n{DoxyCompactList}\small\item\em 將資料 讀入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...oxyCompactList}\small\item\em 將資料讀 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...CompactList}\small\item\em 將資料讀入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em new一 個自己 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...n{DoxyCompactList}\small\item\em new一個 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...oxyCompactList}\small\item\em new一個自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...CompactList}\small\item\em new一個自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 一 個 {\ttfamily \hyperlink{classmeow_1_1Camera}{Camera}} 加上一個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 一個 {\ttfamily \hyperlink{classmeow_1_1Camera}{Camera}} 加上一個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...yperlink{classmeow_1_1Camera}{Camera}} 加 上一個offset transforma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...rlink{classmeow_1_1Camera}{Camera}} 加上 一個offset transformation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...nk{classmeow_1_1Camera}{Camera}} 加上一 個offset transformation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...classmeow_1_1Camera}{Camera}} 加上一個 offset transformation Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 70 [][][] [] [59 <./classmeow_1_1Eye.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 120. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 120. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 120. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 輸 入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 輸入 型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 輸入型 別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:別 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 輸入型別 是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 輸入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:事 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...}{Obj\-Base}} {\ttfamily const$\ast$} 事 實上這個method就只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...bj\-Base}} {\ttfamily const$\ast$} 事實 上這個method就只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...-Base}} {\ttfamily const$\ast$} 事實上 這個method就只是幫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...se}} {\ttfamily const$\ast$} 事實上這 個method就只是幫忙... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...} {\ttfamily const$\ast$} 事實上這個 method就只是幫忙轉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...ily const$\ast$} 事實上這個method就 只是幫忙轉型然後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ... const$\ast$} 事實上這個method就只 是幫忙轉型然後呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...nst$\ast$} 事實上這個method就只是 幫忙轉型然後呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...$\ast$} 事實上這個method就只是幫 忙轉型然後呼叫原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...st$} 事實上這個method就只是幫忙 轉型然後呼叫原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:轉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...} 事實上這個method就只是幫忙轉 型然後呼叫原本的{\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...實上這個method就只是幫忙轉型 然後呼叫原本的{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:然 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...上這個method就只是幫忙轉型然 後呼叫原本的{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...這個method就只是幫忙轉型然後 呼叫原本的{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...個method就只是幫忙轉型然後呼 叫原本的{\ttfamily cop... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...method就只是幫忙轉型然後呼叫 原本的{\ttfamily copy\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...ethod就只是幫忙轉型然後呼叫原 本的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...od就只是幫忙轉型然後呼叫原本 的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 ...只是幫忙轉型然後呼叫原本的 {\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 190 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 new一 個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 new一個 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 new一個自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 new一個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 212 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.213 一 個new出來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.213 一個 new出來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.213 一個new出 來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.213 一個new出來 的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.213 一個new出來的 pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 234 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 ...r} {\ttfamily const{\ttfamily $\ast$} 形 式的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 ...{\ttfamily const{\ttfamily $\ast$} 形式 的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 ...tfamily const{\ttfamily $\ast$} 形式的 typename} Your command was ignored. Type I to replace it with another command, or to continue without it. [60] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 將 資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 將資 料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 將資料 讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 將資料讀 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.311 將資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 313 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.314 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.314 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.314 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 346 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 {\ttfamily std\-::string} 形 式的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 {\ttfamily std\-::string} 形式 的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 {\ttfamily std\-::string} 形式的 typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 將 資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 將資 料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 將資料 寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 將資料寫 入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 將資料寫入 檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 將資料寫入檔 案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.368 將資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 370 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1FeaturePoint.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 特 徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 特徵 點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1FeaturePoint.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1FeaturePoint.pdf used on input line 16. (pdftex.def) Requested size: 187.78146pt x 56.9055pt. [61] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 複 製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 複製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 參 照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 參照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 回 傳position \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 回傳 position \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 回 傳position (non-\/const refer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 回傳 position (non-\/const refer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 回 傳description \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 回傳 description \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 回 傳description (non-\/const re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 回傳 description (non-\/const re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 修 改position \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 修改 position \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 修 改description \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 修改 description \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 回 傳position的第i個scalar \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 回傳 position的第i個scalar \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...mpactList}\small\item\em 回傳position的 第i個scalar \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...ctList}\small\item\em 回傳position的第 i個scalar \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...st}\small\item\em 回傳position的第i個 scalar \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 回 傳description的第i個\-Desc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 回傳 description的第i個\-Desc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...ctList}\small\item\em 回傳description的 第i個\-Description \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...ist}\small\item\em 回傳description的第 i個\-Description \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...\small\item\em 回傳description的第i個 \-Description \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 修 改position的第i個scalar \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 修改 position的第i個scalar \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...mpactList}\small\item\em 修改position的 第i個scalar \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...ctList}\small\item\em 修改position的第 i個scalar \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...st}\small\item\em 修改position的第i個 scalar \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 修 改description的第i個\-Desc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 修改 description的第i個\-Desc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...ctList}\small\item\em 修改description的 第i個\-Description \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...ist}\small\item\em 修改description的第 i個\-Description \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...\small\item\em 修改description的第i個 \-Description \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. [62 <./classmeow_1_1FeaturePoint.pdf>] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 將 物件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 將物 件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...n{DoxyCompactList}\small\item\em 將物件 從檔案讀出, 預設imp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...oxyCompactList}\small\item\em 將物件從 檔案讀出, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...CompactList}\small\item\em 將物件從檔 案讀出, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...pactList}\small\item\em 將物件從檔案 讀出, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...tList}\small\item\em 將物件從檔案讀 出, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...st}\small\item\em 將物件從檔案讀出 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...mall\item\em 將物件從檔案讀出, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...l\item\em 將物件從檔案讀出, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...案讀出, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 特 徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 特徵 點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 80 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 142. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 142. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 142. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 複 製 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 複製 Your command was ignored. Type I to replace it with another command, or to continue without it. [63] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.208 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 回 傳description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 回傳 description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 修 改description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 修改 description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回 傳description的第i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳 description的第i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳description的 第i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳description的第 i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳description的第i個 \-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 修 改description的第i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 修改 description的第i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 修改description的 第i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 修改description的第 i個\-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 修改description的第i個 \-Description Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 回 傳description (non-\/const reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 回傳 description (non-\/const reference) Your command was ignored. Type I to replace it with another command, or to continue without it. [64] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 回 傳position Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 回傳 position Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 修 改position Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 修改 position Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.378 回 傳position的第i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.378 回傳 position的第i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.378 回傳position的 第i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.378 回傳position的第 i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.378 回傳position的第i個 scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.394 修 改position的第i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.394 修改 position的第i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.394 修改position的 第i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.394 修改position的第 i個scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.394 修改position的第i個 scalar Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.409 回 傳position (non-\/const reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.409 回傳 position (non-\/const reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將 物件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物 件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件 從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從 檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從檔 案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從檔案 讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從檔案讀 出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從檔案讀出 , 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從檔案讀出, 預 設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從檔案讀出, 預設 implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 將物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 ...案讀出, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.434 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.434 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.434 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.434 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.434 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.434 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 437 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.438 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.438 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.438 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.438 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.438 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.457 參 照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.457 參照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.472 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. [65] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.493 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.497 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.497 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.499 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.499 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.499 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.499 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.499 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.501 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.501 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.501 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.501 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.501 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.501 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 504 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.505 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.505 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.505 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.505 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.505 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1FeaturePointsDetector.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1FeaturePointsDetector.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1FeaturePointsDetector.pdf used on input l ine 11. (pdftex.def) Requested size: 197.03232pt x 85.35826pt. [66 <./classmeow_1_1FeaturePointsDetector.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 57. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 57. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 57. ) (./classmeow_1_1FeaturePointsDetector__Harris.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1FeaturePointsDetector__Harris.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1FeaturePointsDetector__Harris.pdf used on input line 16. (pdftex.def) Requested size: 197.03232pt x 85.35826pt. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...CompactList}\small\item\em constructor 使 用預設參數 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...pactList}\small\item\em constructor 使用 預設參數 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...tList}\small\item\em constructor 使用預 設參數 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...st}\small\item\em constructor 使用預設 參數 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...\small\item\em constructor 使用預設參 數 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...all\item\em constructor 使用預設參數 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...CompactList}\small\item\em constructor 參 數複製自另一個 \hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...pactList}\small\item\em constructor 參數 複製自另一個 \hyperl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...tList}\small\item\em constructor 參數複 製自另一個 \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...st}\small\item\em constructor 參數複製 自另一個 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...\small\item\em constructor 參數複製自 另一個 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...all\item\em constructor 參數複製自另 一個 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...\item\em constructor 參數複製自另一 個 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...em\em constructor 參數複製自另一個 \hyperlink{classmeow_1_1F... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 解 構子 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 解構 子 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...n{DoxyCompactList}\small\item\em 解構子 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 複 製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 複製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 參 照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 參照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [67 <./classmeow_1_1FeaturePointsDetector__Harris.pdf>] ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 \begin{DoxyCompactList}\small\item\em 找 出特徵點 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 \begin{DoxyCompactList}\small\item\em 找出 特徵點 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...n{DoxyCompactList}\small\item\em 找出特 徵點 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...oxyCompactList}\small\item\em 找出特徵 點 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...CompactList}\small\item\em 找出特徵點 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \begin{DoxyCompactList}\small\item\em 寫 到檔案裡 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \begin{DoxyCompactList}\small\item\em 寫到 檔案裡 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...n{DoxyCompactList}\small\item\em 寫到檔 案裡 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...oxyCompactList}\small\item\em 寫到檔案 裡 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...CompactList}\small\item\em 寫到檔案裡 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 \begin{DoxyCompactList}\small\item\em 將 資料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 \begin{DoxyCompactList}\small\item\em 將資 料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...n{DoxyCompactList}\small\item\em 將資料 讀入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...oxyCompactList}\small\item\em 將資料讀 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...CompactList}\small\item\em 將資料讀入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 \begin{DoxyCompactList}\small\item\em new一 個自己 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 ...n{DoxyCompactList}\small\item\em new一個 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 ...oxyCompactList}\small\item\em new一個自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 ...CompactList}\small\item\em new一個自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. [68] Underfull \hbox (badness 10000) detected at line 95 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 128. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 128. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 128. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.131 解 構子 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.131 解構 子 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.131 解構子 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複 製 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複製 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.164 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.164 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.164 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.164 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 輸 入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 輸入 型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 輸入型 別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:別 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 輸入型別 是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 輸入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...}{Obj\-Base}} {\ttfamily const$\ast$} 這 裡假設實體其實是 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...bj\-Base}} {\ttfamily const$\ast$} 這裡 假設實體其實是 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:假 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...-Base}} {\ttfamily const$\ast$} 這裡假 設實體其實是 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...se}} {\ttfamily const$\ast$} 這裡假設 實體其實是 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...} {\ttfamily const$\ast$} 這裡假設實 體其實是 {\ttfamily \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...\ttfamily const$\ast$} 這裡假設實體 其實是 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...family const$\ast$} 這裡假設實體其 實是 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...ily const$\ast$} 這裡假設實體其實 是 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ... const$\ast$} 這裡假設實體其實是 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:事 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...re\-Points\-Detector\-\_\-\-Harris}}. 事 實上這個method就只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...-Points\-Detector\-\_\-\-Harris}}. 事實 上這個method就只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...ints\-Detector\-\_\-\-Harris}}. 事實上 這個method就只是幫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...s\-Detector\-\_\-\-Harris}}. 事實上這 個method就只是幫忙... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...Detector\-\_\-\-Harris}}. 事實上這個 method就只是幫忙轉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...-\_\-\-Harris}}. 事實上這個method就 只是幫忙轉型然後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...\-\-Harris}}. 事實上這個method就只 是幫忙轉型然後呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...-Harris}}. 事實上這個method就只是 幫忙轉型然後呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...rris}}. 事實上這個method就只是幫 忙轉型然後呼叫原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...s}}. 事實上這個method就只是幫忙 轉型然後呼叫原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:轉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 .... 事實上這個method就只是幫忙轉 型然後呼叫原本的{\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...實上這個method就只是幫忙轉型 然後呼叫原本的{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:然 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...上這個method就只是幫忙轉型然 後呼叫原本的{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...這個method就只是幫忙轉型然後 呼叫原本的{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...個method就只是幫忙轉型然後呼 叫原本的{\ttfamily cop... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...method就只是幫忙轉型然後呼叫 原本的{\ttfamily copy\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...ethod就只是幫忙轉型然後呼叫原 本的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...od就只是幫忙轉型然後呼叫原本 的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...只是幫忙轉型然後呼叫原本的 {\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 173 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 new一 個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 new一個 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 new一個自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 new一個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 195 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 一 個new出來的\-Feature\-Points\-Detector\-\_\-\-Harris$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 一個 new出來的\-Feature\-Points\-Detector\-\_\-\-Harris$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 一個new出 來的\-Feature\-Points\-Detector\-\_\-\-Harris$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 一個new出來 的\-Feature\-Points\-Detector\-\_\-\-Harris$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 一個new出來的 \-Feature\-Points\-Detector\-\_\-\-Harris$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. [69] Underfull \hbox (badness 10000) detected at line 217 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.218 ...r} {\ttfamily const{\ttfamily $\ast$} 形 式的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.218 ...{\ttfamily const{\ttfamily $\ast$} 形式 的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.218 ...tfamily const{\ttfamily $\ast$} 形式的 typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.237 找 出特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.237 找出 特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.237 找出特 徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.237 找出特徵 點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.237 找出特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 \mbox{\tt in} & {\em bmp} & 要 抓特徵點的點陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:抓 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 \mbox{\tt in} & {\em bmp} & 要抓 特徵點的點陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 \mbox{\tt in} & {\em bmp} & 要抓特 徵點的點陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 \mbox{\tt in} & {\em bmp} & 要抓特徵 點的點陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 \mbox{\tt in} & {\em bmp} & 要抓特徵點 的點陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...\tt in} & {\em bmp} & 要抓特徵點的 點陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ... in} & {\em bmp} & 要抓特徵點的點 陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...} & {\em bmp} & 要抓特徵點的點陣 圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...& {\em bmp} & 要抓特徵點的點陣圖 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 244 [][][] [] ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...Feature\-Point$<$double,double$>$$>$} 型 態的一堆特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:態 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...ture\-Point$<$double,double$>$$>$} 型態 的一堆特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...e\-Point$<$double,double$>$$>$} 型態的 一堆特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...Point$<$double,double$>$$>$} 型態的一 堆特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...nt$<$double,double$>$$>$} 型態的一堆 特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...<$double,double$>$$>$} 型態的一堆特 徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...ouble,double$>$$>$} 型態的一堆特徵 點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...le,double$>$$>$} 型態的一堆特徵點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 constructor 使 用預設參數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 constructor 使用 預設參數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 constructor 使用預 設參數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 constructor 使用預設 參數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 constructor 使用預設參 數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 constructor 使用預設參數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參 數複製自另一個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參數 複製自另一個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參數複 製自另一個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參數複製 自另一個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參數複製自 另一個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參數複製自另 一個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參數複製自另一 個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 constructor 參數複製自另一個 \hyperlink{classmeow_1_1FeaturePo... Your command was ignored. Type I to replace it with another command, or to continue without it. [70] [71] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.536 將 資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.536 將資 料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.536 將資料 讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.536 將資料讀 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.536 將資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.538 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.538 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.538 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.555 參 照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.555 參照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.570 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.570 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.570 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 572 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.573 {\ttfamily std\-::string} 形 式的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.573 {\ttfamily std\-::string} 形式 的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.573 {\ttfamily std\-::string} 形式的 typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.594 寫 到檔案裡 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.594 寫到 檔案裡 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.594 寫到檔 案裡 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.594 寫到檔案 裡 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.594 寫到檔案裡 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.596 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.596 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.596 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1FeaturePointsMatch.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1FeaturePointsMatch.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1FeaturePointsMatch.pdf used on input line 11. (pdftex.def) Requested size: 257.49211pt x 85.35826pt. [72 <./classmeow_1_1FeaturePointsMatch.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 89. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 89. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 89. [73]) (./classmeow_1_1FeaturePointsMatch__K__Match.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1FeaturePointsMatch__K__Match.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1FeaturePointsMatch__K__Match.pdf used on input line 11. (pdftex.def) Requested size: 257.49211pt x 85.35826pt. [74 <./classmeow_1_1FeaturePointsMatch__K__Match.pdf>] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 將 物件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 將物 件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...n{DoxyCompactList}\small\item\em 將物件 從檔案讀出, 預設imp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...oxyCompactList}\small\item\em 將物件從 檔案讀出, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...CompactList}\small\item\em 將物件從檔 案讀出, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...pactList}\small\item\em 將物件從檔案 讀出, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...tList}\small\item\em 將物件從檔案讀 出, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...st}\small\item\em 將物件從檔案讀出 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...mall\item\em 將物件從檔案讀出, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...l\item\em 將物件從檔案讀出, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...案讀出, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 複 製, 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 複製 , 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...DoxyCompactList}\small\item\em 複製, 預 設使用operator= \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...yCompactList}\small\item\em 複製, 預設 使用operator= \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...mpactList}\small\item\em 複製, 預設使 用operator= \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...ctList}\small\item\em 複製, 預設使用 operator= \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 101. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 101. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 101. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 複 製, 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 複製 , 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 複製, 預 設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 複製, 預設 使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 複製, 預設使 用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 複製, 預設使用 operator= Your command was ignored. Type I to replace it with another command, or to continue without it. Overfull \hbox (20.50137pt too wide) has occurred while \output is active \OT1/phv/m/sl/10 6.16. MEOW-:-:FEATURE-POINTS-MATCH-[]--K-[]--MATCH$\OML/ztmcm /m/it/10 <$ \OT1/phv/m/sl/10 SCALAR, DESCRIPTION $\OML/ztmcm/m/it/10 >$ \OT1/ph v/m/sl/10 CLASS TEMPLATE REFERENCE \OT1/phv/m/n/10 75 [] [75] [76] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.133 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.133 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.133 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.133 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 136 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. Overfull \hbox (20.50137pt too wide) has occurred while \output is active \OT1/phv/m/sl/10 6.16. MEOW-:-:FEATURE-POINTS-MATCH-[]--K-[]--MATCH$\OML/ztmcm /m/it/10 <$ \OT1/phv/m/sl/10 SCALAR, DESCRIPTION $\OML/ztmcm/m/it/10 >$ \OT1/ph v/m/sl/10 CLASS TEMPLATE REFERENCE \OT1/phv/m/n/10 77 [] [77] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將 物件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物 件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件 從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從 檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從檔 案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從檔案 讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從檔案讀 出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從檔案讀出 , 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從檔案讀出, 預 設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從檔案讀出, 預設 implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 將物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 ...案讀出, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 340 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. [78] ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.396 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.396 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.398 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.398 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.398 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.398 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.398 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 403 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.404 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.404 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.404 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.404 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.404 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1HashTableList.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一 個當key相撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個 當key相撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當 key相撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相 撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:撞 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相撞 時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相撞時 會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相撞時會 用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相撞時會用 list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相撞時會用list解 決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相撞時會用list解決 的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個當key相撞時會用list解決的 hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 清 除資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 清除 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...n{DoxyCompactList}\small\item\em 清除資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...oxyCompactList}\small\item\em 清除資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 清 除資料, 指定新的size與... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 清除 資料, 指定新的size與... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...n{DoxyCompactList}\small\item\em 清除資 料, 指定新的size與ha... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...oxyCompactList}\small\item\em 清除資料 , 指定新的size與hash ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...mpactList}\small\item\em 清除資料, 指 定新的size與hash funct... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...ctList}\small\item\em 清除資料, 指定 新的size與hash function... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...ist}\small\item\em 清除資料, 指定新 的size與hash function \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...}\small\item\em 清除資料, 指定新的 size與hash function \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:與 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\item\em 清除資料, 指定新的size與 hash function \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回 傳table size \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回傳 table size \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 回 傳目前有多少element在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 回傳 目前有多少element在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...n{DoxyCompactList}\small\item\em 回傳目 前有多少element在其... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...oxyCompactList}\small\item\em 回傳目前 有多少element在其中 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...CompactList}\small\item\em 回傳目前有 多少element在其中 \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...pactList}\small\item\em 回傳目前有多 少element在其中 \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:少 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...tList}\small\item\em 回傳目前有多少 element在其中 \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...ll\item\em 回傳目前有多少element在 其中 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...item\em 回傳目前有多少element在其 中 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...m\em 回傳目前有多少element在其中 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 回 傳hash function \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 回傳 hash function \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 加 入新的element \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 加入 新的element \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...n{DoxyCompactList}\small\item\em 加入新 的element \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...oxyCompactList}\small\item\em 加入新的 element \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 把 給定的\-Hash\-Table\-List... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 把給 定的\-Hash\-Table\-List... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...n{DoxyCompactList}\small\item\em 把給定 的\-Hash\-Table\-List中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...oxyCompactList}\small\item\em 把給定的 \-Hash\-Table\-List中所... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...item\em 把給定的\-Hash\-Table\-List中 所有的element全加進... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...m\em 把給定的\-Hash\-Table\-List中所 有的element全加進來 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...m 把給定的\-Hash\-Table\-List中所有 的element全加進來 \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...給定的\-Hash\-Table\-List中所有的 element全加進來 \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...\-Hash\-Table\-List中所有的element全 加進來 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...Hash\-Table\-List中所有的element全加 進來 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:進 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...h\-Table\-List中所有的element全加進 來 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...Table\-List中所有的element全加進來 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 刪 除element \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 刪除 element \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 刪 除有出現在給定的的\-H... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 刪除 有出現在給定的的\-H... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...n{DoxyCompactList}\small\item\em 刪除有 出現在給定的的\-Has... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...oxyCompactList}\small\item\em 刪除有出 現在給定的的\-Hash\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:現 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...CompactList}\small\item\em 刪除有出現 在給定的的\-Hash\-Tab... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...pactList}\small\item\em 刪除有出現在 給定的的\-Hash\-Table\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...tList}\small\item\em 刪除有出現在給 定的的\-Hash\-Table\-Li... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...st}\small\item\em 刪除有出現在給定 的的\-Hash\-Table\-List... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...\small\item\em 刪除有出現在給定的 的\-Hash\-Table\-List中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...all\item\em 刪除有出現在給定的的 \-Hash\-Table\-List中的e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...現在給定的的\-Hash\-Table\-List中 的element \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...在給定的的\-Hash\-Table\-List中的 element \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 查 看某element是否已經擁... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:看 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 查看 某element是否已經擁... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...n{DoxyCompactList}\small\item\em 查看某 element是否已經擁有 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...actList}\small\item\em 查看某element是 否已經擁有 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...List}\small\item\em 查看某element是否 已經擁有 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...t}\small\item\em 查看某element是否已 經擁有 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:經 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...small\item\em 查看某element是否已經 擁有 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擁 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...ll\item\em 查看某element是否已經擁 有 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...item\em 查看某element是否已經擁有 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 回 傳所有存下來的資料 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 回傳 所有存下來的資料 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...n{DoxyCompactList}\small\item\em 回傳所 有存下來的資料 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...oxyCompactList}\small\item\em 回傳所有 存下來的資料 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:存 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...CompactList}\small\item\em 回傳所有存 下來的資料 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:下 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...pactList}\small\item\em 回傳所有存下 來的資料 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...tList}\small\item\em 回傳所有存下來 的資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...st}\small\item\em 回傳所有存下來的 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...\small\item\em 回傳所有存下來的資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...all\item\em 回傳所有存下來的資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 回 傳所有存下來且key為ind... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 回傳 所有存下來且key為ind... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...n{DoxyCompactList}\small\item\em 回傳所 有存下來且key為index... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...oxyCompactList}\small\item\em 回傳所有 存下來且key為index的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:存 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...CompactList}\small\item\em 回傳所有存 下來且key為index的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:下 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...pactList}\small\item\em 回傳所有存下 來且key為index的資料... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...tList}\small\item\em 回傳所有存下來 且key為index的資料 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...st}\small\item\em 回傳所有存下來且 key為index的資料 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...all\item\em 回傳所有存下來且key為 index的資料 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...\em 回傳所有存下來且key為index的 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ... 回傳所有存下來且key為index的資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...傳所有存下來且key為index的資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [79] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一 個當key相撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個 當key相撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當 key相撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相 撞時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:撞 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相撞 時會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相撞時 會用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相撞時會 用list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相撞時會用 list解決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相撞時會用list解 決的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相撞時會用list解決 的hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 一個當key相撞時會用list解決的 hash\-\_\-table Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 61 [][][] [] ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 設 定table size, hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 設定 table size, hash function Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 108. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 108. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 108. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 加 入新的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 加入 新的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 加入新 的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 加入新的 element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把 給定的\-Hash\-Table\-List中所有的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把給 定的\-Hash\-Table\-List中所有的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把給定 的\-Hash\-Table\-List中所有的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把給定的 \-Hash\-Table\-List中所有的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把給定的\-Hash\-Table\-List中 所有的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把給定的\-Hash\-Table\-List中所 有的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把給定的\-Hash\-Table\-List中所有 的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 把給定的\-Hash\-Table\-List中所有的 element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...\-Hash\-Table\-List中所有的element全 加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...ash\-Table\-List中所有的element全加 進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:進 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...\-Table\-List中所有的element全加進 來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...able\-List中所有的element全加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回 傳所有存下來的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳 所有存下來的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所 有存下來的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所有 存下來的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:存 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所有存 下來的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:下 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所有存下 來的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所有存下來 的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所有存下來的 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所有存下來的資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳所有存下來的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回 傳所有存下來且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳 所有存下來且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所 有存下來且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有 存下來且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:存 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存 下來且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:下 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存下 來且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存下來 且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存下來且 key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存下來且key為 index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存下來且key為index的 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存下來且key為index的資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 回傳所有存下來且key為index的資料 Your command was ignored. Type I to replace it with another command, or to continue without it. [80] ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 清 除資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 清除 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 清除資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 清除資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪 除element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪除 element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪 除有出現在給定的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除 有出現在給定的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有 出現在給定的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有出 現在給定的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:現 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有出現 在給定的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有出現在 給定的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有出現在給 定的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有出現在給定 的的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有出現在給定的 的\-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 刪除有出現在給定的的 \-Hash\-Table\-List中的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...現在給定的的\-Hash\-Table\-List中 的element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...在給定的的\-Hash\-Table\-List中的 element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查 看某element是否已經擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:看 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看 某element是否已經擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看某 element是否已經擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看某element是 否已經擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看某element是否 已經擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看某element是否已 經擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:經 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看某element是否已經 擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擁 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看某element是否已經擁 有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 查看某element是否已經擁有 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 回 傳hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.264 回傳 hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清 除資料, 指定新的size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除 資料, 指定新的size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除資 料, 指定新的size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除資料 , 指定新的size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除資料, 指 定新的size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除資料, 指定 新的size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除資料, 指定新 的size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除資料, 指定新的 size與hash function Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:與 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 清除資料, 指定新的size與 hash function Your command was ignored. Type I to replace it with another command, or to continue without it. [81] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回 傳目前有多少element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳 目前有多少element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目 前有多少element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目前 有多少element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目前有 多少element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目前有多 少element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:少 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目前有多少 element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目前有多少element在 其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目前有多少element在其 中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 回傳目前有多少element在其中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 回 傳table size Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 回傳 table size Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1HSL.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [82] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. [83]) (./classmeow_1_1HSLf.tex File: classmeow_1_1HSLf.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1HSLf.pdf used on input line 11. (pdftex.def) Requested size: 102.42555pt x 56.9055pt. [84 <./classmeow_1_1HSLf.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 65. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 65. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 65. [85]) (./classmeow_1_1HSLf__Space.tex ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以 浮點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮 點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點 數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數 {\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...數{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...), {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...eries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...es U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...U}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...色度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...度), {\bfseries V}(濃度) 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...), {\bfseries V}(濃度) 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries V}(濃度) 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...fseries V}(濃度) 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ries V}(濃度) 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...s V}(濃度) 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...}(濃度) 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1HSLf__Space.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1HSLf__Space.pdf used on input line 16. (pdftex.def) Requested size: 142.9746pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以 浮點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮 點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點 數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數 {\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...series V}(濃度) 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ies V}(濃度) 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ... V}(濃度) 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...(濃度) 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其 中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中 範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範 圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍 都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都 介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:介 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介 於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於 0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. [86 <./classmeow_1_1HSLf__Space.pdf>] ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 92 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. [87] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 332. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 332. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 332. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 343. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 343. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 343. [88]) (./classmeow_1_1HSV.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [89] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. [90]) (./classmeow_1_1HSVf.tex File: classmeow_1_1HSVf.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1HSVf.pdf used on input line 11. (pdftex.def) Requested size: 103.84995pt x 56.9055pt. [91 <./classmeow_1_1HSVf.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 65. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 65. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 65. [92]) (./classmeow_1_1HSVf__Space.tex ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以 浮點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮 點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點 數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數 {\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...數{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...), {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...eries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...es U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...U}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...色度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...度), {\bfseries V}(濃度) 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...), {\bfseries V}(濃度) 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries V}(濃度) 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...fseries V}(濃度) 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ries V}(濃度) 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...s V}(濃度) 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...}(濃度) 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1HSVf__Space.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1HSVf__Space.pdf used on input line 16. (pdftex.def) Requested size: 142.9746pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以 浮點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮 點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點 數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數 {\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...series V}(濃度) 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ies V}(濃度) 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ... V}(濃度) 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...(濃度) 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其 中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中 範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範 圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍 都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都 介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:介 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介 於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於 0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. [93 <./classmeow_1_1HSVf__Space.pdf>] ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 92 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. [94] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 277. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 277. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 277. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 288. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 288. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 288. [95]) (./classmeow_1_1IdentityPoints.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 把 一個 {\ttfamily std\-::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 把一 個 {\ttfamily std\-::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 把一個 {\ttfamily std\-::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...-::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包 起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起 來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1IdentityPoints.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1IdentityPoints.pdf used on input line 16. (pdftex.def) Requested size: 152.21777pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ompactList}\small\item\em constructor, 並 且複製資料 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...actList}\small\item\em constructor, 並且 複製資料 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...List}\small\item\em constructor, 並且複 製資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...t}\small\item\em constructor, 並且複製 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...small\item\em constructor, 並且複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ll\item\em constructor, 並且複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 參 照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 參照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 清 除一切identity points \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 清除 一切identity points \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...n{DoxyCompactList}\small\item\em 清除一 切identity points \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:切 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...oxyCompactList}\small\item\em 清除一切 identity points \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 回 傳有幾個identity points \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 回傳 有幾個identity points \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...n{DoxyCompactList}\small\item\em 回傳有 幾個identity points \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...oxyCompactList}\small\item\em 回傳有幾 個identity points \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...CompactList}\small\item\em 回傳有幾個 identity points \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. [96 <./classmeow_1_1IdentityPoints.pdf>] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 回 傳是否沒有identity points... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 回傳 是否沒有identity points... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...n{DoxyCompactList}\small\item\em 回傳是 否沒有identity points \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...oxyCompactList}\small\item\em 回傳是否 沒有identity points \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...CompactList}\small\item\em 回傳是否沒 有identity points \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...pactList}\small\item\em 回傳是否沒有 identity points \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 檢 查某id是否有使用 \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 檢查 某id是否有使用 \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...n{DoxyCompactList}\small\item\em 檢查某 id是否有使用 \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...yCompactList}\small\item\em 檢查某id是 否有使用 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...mpactList}\small\item\em 檢查某id是否 有使用 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...ctList}\small\item\em 檢查某id是否有 使用 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...ist}\small\item\em 檢查某id是否有使 用 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...}\small\item\em 檢查某id是否有使用 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 回 傳dimension \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 回傳 dimension \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 設 定dimension, 並且清空資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 設定 dimension, 並且清空資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ctList}\small\item\em 設定dimension, 並 且清空資料 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ist}\small\item\em 設定dimension, 並且 清空資料 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...}\small\item\em 設定dimension, 並且清 空資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...mall\item\em 設定dimension, 並且清空 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...l\item\em 設定dimension, 並且清空資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...tem\em 設定dimension, 並且清空資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 設 定dimension, 並且針對每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 設定 dimension, 並且針對每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...ctList}\small\item\em 設定dimension, 並 且針對每個identity po... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...ist}\small\item\em 設定dimension, 並且 針對每個identity point... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:針 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...}\small\item\em 設定dimension, 並且針 對每個identity point指... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...mall\item\em 設定dimension, 並且針對 每個identity point指定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...l\item\em 設定dimension, 並且針對每 個identity point指定重... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...tem\em 設定dimension, 並且針對每個 identity point指定重設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...nsion, 並且針對每個identity point指 定重設dimension \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...on, 並且針對每個identity point指定 重設dimension \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ... 並且針對每個identity point指定重 設dimension \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...且針對每個identity point指定重設 dimension \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 取 得所有identity points \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 取得 所有identity points \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...n{DoxyCompactList}\small\item\em 取得所 有identity points \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...oxyCompactList}\small\item\em 取得所有 identity points \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 設 定所有identity points \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 設定 所有identity points \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...n{DoxyCompactList}\small\item\em 設定所 有identity points \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...oxyCompactList}\small\item\em 設定所有 identity points \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \begin{DoxyCompactList}\small\item\em 加 入identity Points \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \begin{DoxyCompactList}\small\item\em 加入 identity Points \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 \begin{DoxyCompactList}\small\item\em 移 除identity Points \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 \begin{DoxyCompactList}\small\item\em 移除 identity Points \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \begin{DoxyCompactList}\small\item\em 取 得一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \begin{DoxyCompactList}\small\item\em 取得 一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 ...n{DoxyCompactList}\small\item\em 取得一 個identity point \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 ...oxyCompactList}\small\item\em 取得一個 identity point \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 \begin{DoxyCompactList}\small\item\em 修 改一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 \begin{DoxyCompactList}\small\item\em 修改 一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...n{DoxyCompactList}\small\item\em 修改一 個identity point \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...oxyCompactList}\small\item\em 修改一個 identity point \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 \begin{DoxyCompactList}\small\item\em 新 增一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 \begin{DoxyCompactList}\small\item\em 新增 一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...n{DoxyCompactList}\small\item\em 新增一 個identity point \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...oxyCompactList}\small\item\em 新增一個 identity point \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \begin{DoxyCompactList}\small\item\em 刪 除一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \begin{DoxyCompactList}\small\item\em 刪除 一個identity point \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...n{DoxyCompactList}\small\item\em 刪除一 個identity point \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...oxyCompactList}\small\item\em 刪除一個 identity point \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.74 \begin{DoxyCompactList}\small\item\em 取 得一個identity point, non-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.74 \begin{DoxyCompactList}\small\item\em 取得 一個identity point, non-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.74 ...n{DoxyCompactList}\small\item\em 取得一 個identity point, non-\/c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.74 ...oxyCompactList}\small\item\em 取得一個 identity point, non-\/cons... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 \begin{DoxyCompactList}\small\item\em 將 資料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 \begin{DoxyCompactList}\small\item\em 將資 料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...n{DoxyCompactList}\small\item\em 將資料 寫入檔案 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...oxyCompactList}\small\item\em 將資料寫 入檔案 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...CompactList}\small\item\em 將資料寫入 檔案 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...pactList}\small\item\em 將資料寫入檔 案 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...tList}\small\item\em 將資料寫入檔案 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 \begin{DoxyCompactList}\small\item\em 將 資料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 \begin{DoxyCompactList}\small\item\em 將資 料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 ...n{DoxyCompactList}\small\item\em 將資料 讀入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 ...oxyCompactList}\small\item\em 將資料讀 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.80 ...CompactList}\small\item\em 將資料讀入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 \begin{DoxyCompactList}\small\item\em new一 個自己 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...n{DoxyCompactList}\small\item\em new一個 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...oxyCompactList}\small\item\em new一個自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...CompactList}\small\item\em new一個自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 把 一個 {\ttfamily std\-::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 把一 個 {\ttfamily std\-::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 把一個 {\ttfamily std\-::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 ...::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包 起來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 ...ap$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起 來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 ...<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 Your command was ignored. Type I to replace it with another command, or to continue without it. [97] Underfull \hbox (badness 10000) detected at line 97 [][][] [] ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 constructor, 並 且複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 constructor, 並且 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 constructor, 並且複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 constructor, 並且複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 constructor, 並且複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.155 constructor, 並且複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 167. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 167. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 167. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 清 除一切identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 清除 一切identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 清除一 切identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:切 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.188 清除一切 identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.218 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.218 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.218 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.218 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 輸 入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 輸入 型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 輸入型 別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:別 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 輸入型別 是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 輸入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...}{Obj\-Base}} {\ttfamily const$\ast$} 這 裡假設實體其實是 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...bj\-Base}} {\ttfamily const$\ast$} 這裡 假設實體其實是 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:假 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...-Base}} {\ttfamily const$\ast$} 這裡假 設實體其實是 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...se}} {\ttfamily const$\ast$} 這裡假設 實體其實是 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...} {\ttfamily const$\ast$} 這裡假設實 體其實是 {\ttfamily \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...\ttfamily const$\ast$} 這裡假設實體 其實是 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...family const$\ast$} 這裡假設實體其 實是 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...ily const$\ast$} 這裡假設實體其實 是 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ... const$\ast$} 這裡假設實體其實是 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:事 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...erlink{classmeow_1_1Bitmap}{Bitmap}}. 事 實上這個method就只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...ink{classmeow_1_1Bitmap}{Bitmap}}. 事實 上這個method就只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...{classmeow_1_1Bitmap}{Bitmap}}. 事實上 這個method就只是幫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...assmeow_1_1Bitmap}{Bitmap}}. 事實上這 個method就只是幫忙... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...meow_1_1Bitmap}{Bitmap}}. 事實上這個 method就只是幫忙轉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...itmap}{Bitmap}}. 事實上這個method就 只是幫忙轉型然後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...ap}{Bitmap}}. 事實上這個method就只 是幫忙轉型然後呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...{Bitmap}}. 事實上這個method就只是 幫忙轉型然後呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...tmap}}. 事實上這個method就只是幫 忙轉型然後呼叫原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...p}}. 事實上這個method就只是幫忙 轉型然後呼叫原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:轉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 .... 事實上這個method就只是幫忙轉 型然後呼叫原本的{\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...實上這個method就只是幫忙轉型 然後呼叫原本的{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:然 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...上這個method就只是幫忙轉型然 後呼叫原本的{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...這個method就只是幫忙轉型然後 呼叫原本的{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...個method就只是幫忙轉型然後呼 叫原本的{\ttfamily cop... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...method就只是幫忙轉型然後呼叫 原本的{\ttfamily copy\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...ethod就只是幫忙轉型然後呼叫原 本的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...od就只是幫忙轉型然後呼叫原本 的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 ...只是幫忙轉型然後呼叫原本的 {\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. [98] [99] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 227 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 new一 個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 new一個 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 new一個自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 new一個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 249 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.250 一 個new出來的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.250 一個 new出來的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.250 一個new出 來的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.250 一個new出來 的\-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.250 一個new出來的 \-Bitmap$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 271 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.272 ...r} {\ttfamily const{\ttfamily $\ast$} 形 式的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.272 ...{\ttfamily const{\ttfamily $\ast$} 形式 的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.272 ...tfamily const{\ttfamily $\ast$} 形式的 typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回 傳dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回傳 dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設 定dimension, 並且清空資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設定 dimension, 並且清空資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設定dimension, 並 且清空資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設定dimension, 並且 清空資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設定dimension, 並且清 空資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設定dimension, 並且清空 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設定dimension, 並且清空資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 設定dimension, 並且清空資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設 定dimension, 並且針對每個identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設定 dimension, 並且針對每個identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設定dimension, 並 且針對每個identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設定dimension, 並且 針對每個identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:針 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設定dimension, 並且針 對每個identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設定dimension, 並且針對 每個identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設定dimension, 並且針對每 個identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 設定dimension, 並且針對每個 identity point指定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 ...sion, 並且針對每個identity point指 定重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 ...n, 並且針對每個identity point指定 重設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 ...並且針對每個identity point指定重 設dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.322 ...且針對每個identity point指定重設 dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 回 傳是否沒有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 回傳 是否沒有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 回傳是 否沒有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 回傳是否 沒有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 回傳是否沒 有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 回傳是否沒有 identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢 查某id是否有使用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢查 某id是否有使用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢查某 id是否有使用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢查某id是 否有使用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢查某id是否 有使用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢查某id是否有 使用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢查某id是否有使 用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 檢查某id是否有使用 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 取 得一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 取得 一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 取得一 個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 取得一個 identity point Your command was ignored. Type I to replace it with another command, or to continue without it. [100] ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.383 修 改一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.383 修改 一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.383 修改一 個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.383 修改一個 identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.399 新 增一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.399 新增 一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.399 新增一 個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.399 新增一個 identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.414 刪 除一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.414 刪除 一個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.414 刪除一 個identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.414 刪除一個 identity point Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.429 取 得一個identity point, non-\/constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.429 取得 一個identity point, non-\/constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.429 取得一 個identity point, non-\/constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.429 取得一個 identity point, non-\/constant reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 取 得所有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 取得 所有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 取得所 有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 取得所有 identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.459 設 定所有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.459 設定 所有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.459 設定所 有identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.459 設定所有 identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 加 入identity Points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.474 加入 identity Points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 移 除identity Points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 移除 identity Points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.521 將 資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.521 將資 料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.521 將資料 讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.521 將資料讀 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.521 將資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. [101] Underfull \hbox (badness 10000) detected at line 523 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.524 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.524 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.524 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.543 參 照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.543 參照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.558 回 傳有幾個identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.558 回傳 有幾個identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.558 回傳有 幾個identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.558 回傳有幾 個identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.558 回傳有幾個 identity points Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.573 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.573 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.573 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 575 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.576 {\ttfamily std\-::string} 形 式的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.576 {\ttfamily std\-::string} 形式 的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.576 {\ttfamily std\-::string} 形式的 typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 將 資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 將資 料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 將資料 寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 將資料寫 入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 將資料寫入 檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 將資料寫入檔 案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.597 將資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 599 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.600 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.600 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.600 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1ImplementInterface.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [102] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 49. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 49. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 49. ) (./classmeow_1_1KD__Tree.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 將 給定的\-Vector加到set中 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 將給 定的\-Vector加到set中 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...n{DoxyCompactList}\small\item\em 將給定 的\-Vector加到set中 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...oxyCompactList}\small\item\em 將給定的 \-Vector加到set中 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...ist}\small\item\em 將給定的\-Vector加 到set中 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...}\small\item\em 將給定的\-Vector加到 set中 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...l\item\em 將給定的\-Vector加到set中 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將 給定的\-Vector從set移除 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將給 定的\-Vector從set移除 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...n{DoxyCompactList}\small\item\em 將給定 的\-Vector從set移除 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...oxyCompactList}\small\item\em 將給定的 \-Vector從set移除 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...ist}\small\item\em 將給定的\-Vector從 set移除 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...mall\item\em 將給定的\-Vector從set移 除 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...l\item\em 將給定的\-Vector從set移除 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 檢 查至今是否有 insert/eras... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 檢查 至今是否有 insert/eras... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...n{DoxyCompactList}\small\item\em 檢查至 今是否有 insert/erase ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:今 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...oxyCompactList}\small\item\em 檢查至今 是否有 insert/erase 被... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...CompactList}\small\item\em 檢查至今是 否有 insert/erase 被呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...pactList}\small\item\em 檢查至今是否 有 insert/erase 被呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...tList}\small\item\em 檢查至今是否有 insert/erase 被呼叫來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...\em 檢查至今是否有 insert/erase 被 呼叫來決定是否 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ... 檢查至今是否有 insert/erase 被呼 叫來決定是否 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...查至今是否有 insert/erase 被呼叫 來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...至今是否有 insert/erase 被呼叫來 決定是否 {\ttfamily re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...今是否有 insert/erase 被呼叫來決 定是否 {\ttfamily rebui... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...是否有 insert/erase 被呼叫來決定 是否 {\ttfamily rebuild(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...否有 insert/erase 被呼叫來決定是 否 {\ttfamily rebuild()} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...有 insert/erase 被呼叫來決定是否 {\ttfamily rebuild()} \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 重 新建樹 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 重新 建樹 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:建 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...n{DoxyCompactList}\small\item\em 重新建 樹 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...oxyCompactList}\small\item\em 重新建樹 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 查 找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 查找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 清 空所有資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 清空 所有資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...n{DoxyCompactList}\small\item\em 清空所 有資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...oxyCompactList}\small\item\em 清空所有 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...CompactList}\small\item\em 清空所有資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...pactList}\small\item\em 清空所有資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 清 空所有資料並重新給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 清空 所有資料並重新給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...n{DoxyCompactList}\small\item\em 清空所 有資料並重新給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...oxyCompactList}\small\item\em 清空所有 資料並重新給定維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...CompactList}\small\item\em 清空所有資 料並重新給定維度 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...pactList}\small\item\em 清空所有資料 並重新給定維度 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tList}\small\item\em 清空所有資料並 重新給定維度 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...st}\small\item\em 清空所有資料並重 新給定維度 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\small\item\em 清空所有資料並重新 給定維度 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...all\item\em 清空所有資料並重新給 定維度 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\item\em 清空所有資料並重新給定 維度 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...em\em 清空所有資料並重新給定維 度 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...em 清空所有資料並重新給定維度 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 全 名k-\/dimension tree, 用來維護由{\bfseries N個\-K維度向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 全名 k-\/dimension tree, 用來維護由{\bfseries N個\-K維度向量... Your command was ignored. Type I to replace it with another command, or to continue without it. [103] ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 全名k-\/dimension tree, 用 來維護由{\bfseries N個\-K維度向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 全名k-\/dimension tree, 用來 維護由{\bfseries N個\-K維度向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 全名k-\/dimension tree, 用來維 護由{\bfseries N個\-K維度向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 全名k-\/dimension tree, 用來維護 由{\bfseries N個\-K維度向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 全名k-\/dimension tree, 用來維護由 {\bfseries N個\-K維度向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...nsion tree, 用來維護由{\bfseries N個 \-K維度向量所成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...tree, 用來維護由{\bfseries N個\-K維 度向量所成的集合},... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...e, 用來維護由{\bfseries N個\-K維度 向量所成的集合}, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...用來維護由{\bfseries N個\-K維度向 量所成的集合}, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...來維護由{\bfseries N個\-K維度向量 所成的集合}, 並可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...維護由{\bfseries N個\-K維度向量所 成的集合}, 並可於... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...護由{\bfseries N個\-K維度向量所成 的集合}, 並可於該se... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...由{\bfseries N個\-K維度向量所成的 集合}, 並可於該set... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...{\bfseries N個\-K維度向量所成的集 合}, 並可於該set中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...fseries N個\-K維度向量所成的集合 }, 並可於該set中查... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...s N個\-K維度向量所成的集合}, 並 可於該set中查找 {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...個\-K維度向量所成的集合}, 並可 於該set中查找 {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...\-K維度向量所成的集合}, 並可於 該set中查找 {\bfseries... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...維度向量所成的集合}, 並可於該 set中查找 {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...向量所成的集合}, 並可於該set中 查找 {\bfseries 前i個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...量所成的集合}, 並可於該set中查 找 {\bfseries 前i個離... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...所成的集合}, 並可於該set中查找 {\bfseries 前i個離給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...}, 並可於該set中查找 {\bfseries 前 i個離給定向量最接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...可於該set中查找 {\bfseries 前i個 離給定向量最接近... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...於該set中查找 {\bfseries 前i個離 給定向量最接近的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...該set中查找 {\bfseries 前i個離給 定向量最接近的向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...set中查找 {\bfseries 前i個離給定 向量最接近的向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...et中查找 {\bfseries 前i個離給定向 量最接近的向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...查找 {\bfseries 前i個離給定向量 最接近的向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...找 {\bfseries 前i個離給定向量最 接近的向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ... {\bfseries 前i個離給定向量最接 近的向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...{\bfseries 前i個離給定向量最接近 的向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...fseries 前i個離給定向量最接近的 向量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...ries 前i個離給定向量最接近的向 量} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...s 前i個離給定向量最接近的向量 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...{\ttfamily n}) &\PBS\centering Scalar &取 得第 {\ttfamily n} 維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...tfamily n}) &\PBS\centering Scalar &取得 第 {\ttfamily n} 維度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...mily n}) &\PBS\centering Scalar &取得第 {\ttfamily n} 維度量 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...tering Scalar &取得第 {\ttfamily n} 維 度量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...ing Scalar &取得第 {\ttfamily n} 維度 量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ... Scalar &取得第 {\ttfamily n} 維度量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:權 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...} {\ttfamily v}) &\PBS\centering bool &權 重比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...\ttfamily v}) &\PBS\centering bool &權重 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...family v}) &\PBS\centering bool &權重比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...ily v}) &\PBS\centering bool &權重比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...{\ttfamily s}) &\PBS\centering Scalar &相 乘 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乘 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...tfamily s}) &\PBS\centering Scalar &相乘 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...{\ttfamily s}) &\PBS\centering Scalar &相 加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...tfamily s}) &\PBS\centering Scalar &相加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...{\ttfamily s}) &\PBS\centering Scalar &相 差 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...tfamily s}) &\PBS\centering Scalar &相差 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...r {\ttfamily s}) &\PBS\centering bool &大 小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...\ttfamily s}) &\PBS\centering bool &大小 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...family s}) &\PBS\centering bool &大小比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...ily s}) &\PBS\centering bool &大小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) in alignment at lines 52--61 [][][][][][] [] Underfull \hbox (badness 10000) detected at line 62 [][][] [] ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此 資料結構只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此資 料結構只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此資料 結構只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此資料結 構只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此資料結構 只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此資料結構只 有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此資料結構只有 在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \-: 此資料結構只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...構只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時 才比較有優勢, 當 K ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:才 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...只有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才 比較有優勢, 當 K 逐... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...有在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比 較有優勢, 當 K 逐漸... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...在 N $>$$>$ 2 $^{\mbox{K}}$ 時才比較 有優勢, 當 K 逐漸變... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... N $>$$>$ 2 $^{\mbox{K}}$ 時才比較有 優勢, 當 K 逐漸變大... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:優 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...$>$$>$ 2 $^{\mbox{K}}$ 時才比較有優 勢, 當 K 逐漸變大時... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:勢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...$>$ 2 $^{\mbox{K}}$ 時才比較有優勢 , 當 K 逐漸變大時, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... $^{\mbox{K}}$ 時才比較有優勢, 當 K 逐漸變大時, 所花... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:逐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...box{K}}$ 時才比較有優勢, 當 K 逐 漸變大時, 所花時間... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:漸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...{K}}$ 時才比較有優勢, 當 K 逐漸 變大時, 所花時間會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...}$ 時才比較有優勢, 當 K 逐漸變 大時, 所花時間會跟... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... 時才比較有優勢, 當 K 逐漸變大 時, 所花時間會跟暴... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...才比較有優勢, 當 K 逐漸變大時 , 所花時間會跟暴搜... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...較有優勢, 當 K 逐漸變大時, 所 花時間會跟暴搜沒... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:花 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...有優勢, 當 K 逐漸變大時, 所花 時間會跟暴搜沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...優勢, 當 K 逐漸變大時, 所花時 間會跟暴搜沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...勢, 當 K 逐漸變大時, 所花時間 會跟暴搜沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ..., 當 K 逐漸變大時, 所花時間會 跟暴搜沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... 當 K 逐漸變大時, 所花時間會跟 暴搜沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:暴 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... K 逐漸變大時, 所花時間會跟暴 搜沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:搜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... 逐漸變大時, 所花時間會跟暴搜 沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...漸變大時, 所花時間會跟暴搜沒 兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...變大時, 所花時間會跟暴搜沒兩 樣 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...大時, 所花時間會跟暴搜沒兩樣 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 65 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 125. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 125. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 125. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢 查至今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查 至今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至 今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:今 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至今 是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至今是 否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至今是否 有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至今是否有 insert/erase 被 呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至今是否有 insert/erase 被呼 叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 檢查至今是否有 insert/erase 被呼叫 來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 ...至今是否有 insert/erase 被呼叫來 決定是否 {\ttfamily re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 ...今是否有 insert/erase 被呼叫來決 定是否 {\ttfamily rebui... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 ...是否有 insert/erase 被呼叫來決定 是否 {\ttfamily rebuild()} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 ...否有 insert/erase 被呼叫來決定是 否 {\ttfamily rebuild()} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.146 ...有 insert/erase 被呼叫來決定是否 {\ttfamily rebuild()} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 清 空所有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 清空 所有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 清空所 有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 清空所有 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 清空所有資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 清空所有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 將 給定的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 將給 定的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 將給定 的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 將給定的 \-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 將給定的\-Vector從 set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 將給定的\-Vector從set移 除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 將給定的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. [104] ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 重 新建樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 重新 建樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:建 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 重新建 樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 重新建樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 將 給定的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 將給 定的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 將給定 的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 將給定的 \-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 將給定的\-Vector加 到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 將給定的\-Vector加到 set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 將給定的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.223 查 找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.223 查找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於 set中找尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中 找尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找 尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋 距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋距 離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋距離 指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋距離指 定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋距離指定 向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋距離指定向 量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋距離指定向量 前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 於set中找尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...距離指定向量前 {\ttfamily i} 近 的向量, 並依照由近... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...離指定向量前 {\ttfamily i} 近的 向量, 並依照由近而... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...指定向量前 {\ttfamily i} 近的向 量, 並依照由近而遠... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...定向量前 {\ttfamily i} 近的向量 , 並依照由近而遠的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...向量前 {\ttfamily i} 近的向量, 並 依照由近而遠的順... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...量前 {\ttfamily i} 近的向量, 並依 照由近而遠的順序... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...前 {\ttfamily i} 近的向量, 並依照 由近而遠的順序排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ... {\ttfamily i} 近的向量, 並依照由 近而遠的順序排序. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...ttfamily i} 近的向量, 並依照由近 而遠的順序排序. 如... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:而 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...amily i} 近的向量, 並依照由近而 遠的順序排序. 如果... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:遠 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...ly i} 近的向量, 並依照由近而遠 的順序排序. 如果有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...i} 近的向量, 並依照由近而遠的 順序排序. 如果有兩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:順 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...近的向量, 並依照由近而遠的順 序排序. 如果有兩個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...的向量, 並依照由近而遠的順序 排序. 如果有兩個向... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...向量, 並依照由近而遠的順序排 序. 如果有兩個向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...量, 並依照由近而遠的順序排序 . 如果有兩個向量{\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...並依照由近而遠的順序排序. 如 果有兩個向量{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...依照由近而遠的順序排序. 如果 有兩個向量{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...照由近而遠的順序排序. 如果有 兩個向量{\ttfamily v1}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...由近而遠的順序排序. 如果有兩 個向量{\ttfamily v1},v2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...近而遠的順序排序. 如果有兩個 向量{\ttfamily v1},v2 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...而遠的順序排序. 如果有兩個向 量{\ttfamily v1},v2 距... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...遠的順序排序. 如果有兩個向量 {\ttfamily v1},v2 距離... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...果有兩個向量{\ttfamily v1},v2 距 離一樣, 且 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...有兩個向量{\ttfamily v1},v2 距離 一樣, 且 {\ttfamily cmp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...兩個向量{\ttfamily v1},v2 距離一 樣, 且 {\ttfamily cmp} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...個向量{\ttfamily v1},v2 距離一樣 , 且 {\ttfamily cmp} 為{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...向量{\ttfamily v1},v2 距離一樣, 且 {\ttfamily cmp} 為{\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...,v2 距離一樣, 且 {\ttfamily cmp} 為 {\ttfamily true} , 則直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...{\ttfamily cmp} 為{\ttfamily true} , 則 直接依照 {\ttfamily v1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...tfamily cmp} 為{\ttfamily true} , 則直 接依照 {\ttfamily v1$<$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...mily cmp} 為{\ttfamily true} , 則直接 依照 {\ttfamily v1$<$v2}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...y cmp} 為{\ttfamily true} , 則直接依 照 {\ttfamily v1$<$v2} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...mp} 為{\ttfamily true} , 則直接依照 {\ttfamily v1$<$v2} 來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ..., 則直接依照 {\ttfamily v1$<$v2} 來 決定誰在前面. 最後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...直接依照 {\ttfamily v1$<$v2} 來決 定誰在前面. 最後回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...接依照 {\ttfamily v1$<$v2} 來決定 誰在前面. 最後回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:誰 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...依照 {\ttfamily v1$<$v2} 來決定誰 在前面. 最後回傳一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...照 {\ttfamily v1$<$v2} 來決定誰在 前面. 最後回傳一陣... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ... {\ttfamily v1$<$v2} 來決定誰在前 面. 最後回傳一陣列... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:面 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...{\ttfamily v1$<$v2} 來決定誰在前面 . 最後回傳一陣列包... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...amily v1$<$v2} 來決定誰在前面. 最 後回傳一陣列包含... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...ly v1$<$v2} 來決定誰在前面. 最後 回傳一陣列包含所... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...v1$<$v2} 來決定誰在前面. 最後回 傳一陣列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...<$v2} 來決定誰在前面. 最後回傳 一陣列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...2} 來決定誰在前面. 最後回傳一 陣列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...來決定誰在前面. 最後回傳一陣 列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:列 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...決定誰在前面. 最後回傳一陣列 包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...定誰在前面. 最後回傳一陣列包 含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...誰在前面. 最後回傳一陣列包含 所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...在前面. 最後回傳一陣列包含所 有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...前面. 最後回傳一陣列包含所有 解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 ...面. 最後回傳一陣列包含所有解 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清 空所有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空 所有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所 有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有 資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資 料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料 並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料並 重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料並重 新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料並重新 給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料並重新給 定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料並重新給定 維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料並重新給定維 度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.238 清空所有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1LinearTransformation.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1LinearTransformation.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1LinearTransformation.pdf used on input li ne 16. (pdftex.def) Requested size: 169.99962pt x 85.35826pt. [105 <./classmeow_1_1LinearTransformation.pdf>] Underfull \hbox (badness 10000) detected at line 52 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 113. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 113. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 113. [106] Underfull \hbox (badness 10000) detected at line 167 [][][] [] Underfull \hbox (badness 10000) detected at line 185 [][][] [] ) (./classmeow_1_1Matrix.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [107] [108] [109] Underfull \hbox (badness 10000) detected at line 128 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 226. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 226. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 226. [110] Underfull \hbox (badness 10000) detected at line 304 [][][] [] Underfull \hbox (badness 10000) detected at line 329 [][][] [] [111] Underfull \hbox (badness 10000) detected at line 409 [][][] [] [112] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 609. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 609. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 609. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 624. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 624. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 624. [113] Underfull \hbox (badness 10000) detected at line 756 [][][] [] Underfull \hbox (badness 10000) detected at line 831 [][][] [] [114] Underfull \hbox (badness 10000) detected at line 877 [][][] [] Underfull \hbox (badness 10000) detected at line 926 [][][] [] [115]) (./classmeow_1_1MergeableHeap.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一 個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個 用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:左 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個用 {\bfseries 左 偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個用 {\bfseries 左偏 樹} 實作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個用 {\bfseries 左偏樹 } 實作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個用 {\bfseries 左偏樹} 實 作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個用 {\bfseries 左偏樹} 實作 的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...作的 {\ttfamily Maximum-\/\-Heap} , 除 了原本heap有的功能... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...的 {\ttfamily Maximum-\/\-Heap} , 除了 原本heap有的功能外,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\ttfamily Maximum-\/\-Heap} , 除了原 本heap有的功能外, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\ttfamily Maximum-\/\-Heap} , 除了原本 heap有的功能外, 還... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ily Maximum-\/\-Heap} , 除了原本heap有 的功能外, 還支援 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... Maximum-\/\-Heap} , 除了原本heap有的 功能外, 還支援 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ximum-\/\-Heap} , 除了原本heap有的功 能外, 還支援 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...um-\/\-Heap} , 除了原本heap有的功能 外, 還支援 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...\/\-Heap} , 除了原本heap有的功能外 , 還支援 {\ttfamily mer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:還 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...eap} , 除了原本heap有的功能外, 還 支援 {\ttfamily merge} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...} , 除了原本heap有的功能外, 還支 援 {\ttfamily merge} 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... 除了原本heap有的功能外, 還支援 {\ttfamily merge} 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...功能外, 還支援 {\ttfamily merge} 功 能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...能外, 還支援 {\ttfamily merge} 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...ompactList}\small\item\em constructor, 並 且複製資料 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...actList}\small\item\em constructor, 並且 複製資料 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...List}\small\item\em constructor, 並且複 製資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...t}\small\item\em constructor, 並且複製 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...small\item\em constructor, 並且複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...ll\item\em constructor, 並且複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 將 自己的資料丟給指定的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 將自 己的資料丟給指定的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...n{DoxyCompactList}\small\item\em 將自己 的資料丟給指定的he... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...oxyCompactList}\small\item\em 將自己的 資料丟給指定的heap,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...CompactList}\small\item\em 將自己的資 料丟給指定的heap, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...pactList}\small\item\em 將自己的資料 丟給指定的heap, 從... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...tList}\small\item\em 將自己的資料丟 給指定的heap, 從此... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...st}\small\item\em 將自己的資料丟給 指定的heap, 從此自... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...\small\item\em 將自己的資料丟給指 定的heap, 從此自己... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...all\item\em 將自己的資料丟給指定 的heap, 從此自己一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...\item\em 將自己的資料丟給指定的 heap, 從此自己一身... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...將自己的資料丟給指定的heap, 從 此自己一身空 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...自己的資料丟給指定的heap, 從此 自己一身空 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...己的資料丟給指定的heap, 從此自 己一身空 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...的資料丟給指定的heap, 從此自己 一身空 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...資料丟給指定的heap, 從此自己一 身空 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...料丟給指定的heap, 從此自己一身 空 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...丟給指定的heap, 從此自己一身空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 回 傳最大的那個 Element \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 回傳 最大的那個 Element \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...n{DoxyCompactList}\small\item\em 回傳最 大的那個 Element \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...oxyCompactList}\small\item\em 回傳最大 的那個 Element \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...CompactList}\small\item\em 回傳最大的 那個 Element \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:那 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...pactList}\small\item\em 回傳最大的那 個 Element \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...tList}\small\item\em 回傳最大的那個 Element \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回 傳資料個數 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回傳 資料個數 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...n{DoxyCompactList}\small\item\em 回傳資 料個數 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...oxyCompactList}\small\item\em 回傳資料 個數 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...CompactList}\small\item\em 回傳資料個 數 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...pactList}\small\item\em 回傳資料個數 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 回 傳是否為空 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 回傳 是否為空 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...n{DoxyCompactList}\small\item\em 回傳是 否為空 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...oxyCompactList}\small\item\em 回傳是否 為空 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...CompactList}\small\item\em 回傳是否為 空 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...pactList}\small\item\em 回傳是否為空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 加 入element \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 加入 element \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 將 最大的element移除 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 將最 大的element移除 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...n{DoxyCompactList}\small\item\em 將最大 的element移除 \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...oxyCompactList}\small\item\em 將最大的 element移除 \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...List}\small\item\em 將最大的element移 除 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...t}\small\item\em 將最大的element移除 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一 個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個 用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:左 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個用 {\bfseries 左 偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個用 {\bfseries 左偏 樹} 實作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個用 {\bfseries 左偏樹 } 實作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個用 {\bfseries 左偏樹} 實 作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個用 {\bfseries 左偏樹} 實作 的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 一個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-Heap} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...作的 {\ttfamily Maximum-\/\-Heap} , 除 了原本heap有的功能... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...的 {\ttfamily Maximum-\/\-Heap} , 除了 原本heap有的功能外,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ... {\ttfamily Maximum-\/\-Heap} , 除了原 本heap有的功能外, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...\ttfamily Maximum-\/\-Heap} , 除了原本 heap有的功能外, 還... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...ly Maximum-\/\-Heap} , 除了原本heap有 的功能外, 還支援 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...Maximum-\/\-Heap} , 除了原本heap有的 功能外, 還支援 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...imum-\/\-Heap} , 除了原本heap有的功 能外, 還支援 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...m-\/\-Heap} , 除了原本heap有的功能 外, 還支援 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 .../\-Heap} , 除了原本heap有的功能外 , 還支援 {\ttfamily mer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:還 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...ap} , 除了原本heap有的功能外, 還 支援 {\ttfamily merge} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ... , 除了原本heap有的功能外, 還支 援 {\ttfamily merge} 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...除了原本heap有的功能外, 還支援 {\ttfamily merge} 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...功能外, 還支援 {\ttfamily merge} 功 能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...能外, 還支援 {\ttfamily merge} 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...nt {\ttfamily b})&\PBS\centering bool &大 小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...{\ttfamily b})&\PBS\centering bool &大小 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...tfamily b})&\PBS\centering bool &大小比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...mily b})&\PBS\centering bool &大小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) in alignment at lines 51--55 [][][][][][] [] Underfull \hbox (badness 10000) detected at line 56 [][][] [] ! Package inputenc Error: Unicode char \u8:假 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \-: 假 設現在有兩個\-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \-: 假設 現在有兩個\-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:現 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \-: 假設現 在有兩個\-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \-: 假設現在 有兩個\-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \-: 假設現在有 兩個\-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \-: 假設現在有兩 個\-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \-: 假設現在有兩個 \-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:和 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...兩個\-Mergeable\-Heap {\ttfamily A} 和 {\ttfamily B}, 則\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...-Heap {\ttfamily A} 和 {\ttfamily B}, 則 \-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:執 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \item 執 行 {\ttfamily A.\-merge(\&\-B)} 後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \item 執行 {\ttfamily A.\-merge(\&\-B)} 後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \item 執行 {\ttfamily A.\-merge(\&\-B)} 後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...ly A.\-merge(\&\-B)} 後 {\ttfamily B} 會 變成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...A.\-merge(\&\-B)} 後 {\ttfamily B} 會變 成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...-merge(\&\-B)} 後 {\ttfamily B} 會變成 空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...rge(\&\-B)} 後 {\ttfamily B} 會變成空 的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...(\&\-B)} 後 {\ttfamily B} 會變成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:執 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \item 執 行 {\ttfamily B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會變... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \item 執行 {\ttfamily B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會變... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...執行 {\ttfamily B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會 變成空的, {\ttfamily A... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...-move\-To(\&\-A)} 後 {\ttfamily B} 會變 成空的, {\ttfamily A} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...ve\-To(\&\-A)} 後 {\ttfamily B} 會變成 空的, {\ttfamily A} 原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...-To(\&\-A)} 後 {\ttfamily B} 會變成空 的, {\ttfamily A} 原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...(\&\-A)} 後 {\ttfamily B} 會變成空的 , {\ttfamily A} 原本擁... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...mily B} 會變成空的, {\ttfamily A} 原 本擁有的資料也會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...y B} 會變成空的, {\ttfamily A} 原本 擁有的資料也會覆... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擁 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...} 會變成空的, {\ttfamily A} 原本擁 有的資料也會覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...變成空的, {\ttfamily A} 原本擁有 的資料也會覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...成空的, {\ttfamily A} 原本擁有的 資料也會覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...空的, {\ttfamily A} 原本擁有的資 料也會覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...的, {\ttfamily A} 原本擁有的資料 也會覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:也 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ..., {\ttfamily A} 原本擁有的資料也 會覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ... {\ttfamily A} 原本擁有的資料也會 覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:覆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...ttfamily A} 原本擁有的資料也會覆 蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:蓋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...amily A} 原本擁有的資料也會覆蓋 掉 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:掉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...ly A} 原本擁有的資料也會覆蓋掉 Your command was ignored. Type I to replace it with another command, or to continue without it. [116] Underfull \hbox (badness 10000) detected at line 63 [][][] [] ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 constructor, 並 且複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 constructor, 並且 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 constructor, 並且複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 constructor, 並且複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 constructor, 並且複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 constructor, 並且複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 109. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 109. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 109. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 將 資料清空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 將資 料清空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 將資料 清空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 將資料清 空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.128 將資料清空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.141 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.141 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.141 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.141 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回 傳是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳 是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳是 否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳是否 為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳是否為 空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.156 回傳是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將 給定的\-Mergeable\-Heap的資料統統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給 定的\-Mergeable\-Heap的資料統統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給定 的\-Mergeable\-Heap的資料統統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給定的 \-Mergeable\-Heap的資料統統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給定的\-Mergeable\-Heap的 資料統統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給定的\-Mergeable\-Heap的資 料統統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給定的\-Mergeable\-Heap的資料 統統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:統 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給定的\-Mergeable\-Heap的資料統 統加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:統 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 將給定的\-Mergeable\-Heap的資料統統 加到自己身上並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...定的\-Mergeable\-Heap的資料統統加 到自己身上並且清... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...的\-Mergeable\-Heap的資料統統加到 自己身上並且清空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...\-Mergeable\-Heap的資料統統加到自 己身上並且清空該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...ergeable\-Heap的資料統統加到自己 身上並且清空該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...eable\-Heap的資料統統加到自己身 上並且清空該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...le\-Heap的資料統統加到自己身上 並且清空該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...-Heap的資料統統加到自己身上並 且清空該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...ap的資料統統加到自己身上並且 清空該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...資料統統加到自己身上並且清 空該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...料統統加到自己身上並且清空 該heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.169 ...統統加到自己身上並且清空該 heap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將 自己的資料丟給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自 己的資料丟給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己 的資料丟給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的 資料丟給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資 料丟給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資料 丟給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資料丟 給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資料丟給 指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資料丟給指 定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資料丟給指定 的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資料丟給指定的 heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將自己的資料丟給指定的heap, 從 此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 ...己的資料丟給指定的heap, 從此 自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 ...的資料丟給指定的heap, 從此自 己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 ...資料丟給指定的heap, 從此自己 一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 ...料丟給指定的heap, 從此自己一 身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 ...丟給指定的heap, 從此自己一身 空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 ...給指定的heap, 從此自己一身空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 將 最大的element移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 將最 大的element移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 將最大 的element移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 將最大的 element移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 將最大的element移 除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 將最大的element移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 加 入element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 加入 element Your command was ignored. Type I to replace it with another command, or to continue without it. [117] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 回 傳資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 回傳 資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 回傳資 料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 回傳資料 個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 回傳資料個 數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 回傳資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回 傳最大的那個 Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳 最大的那個 Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳最 大的那個 Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳最大 的那個 Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳最大的 那個 Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:那 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳最大的那 個 Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳最大的那個 Element Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1ObjArray.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純 粹把 {\ttfamily std\-::vector} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹 把 {\ttfamily std\-::vector} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::vector} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::vector} 包 起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::vector} 包起 來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::vector} 包起來 , 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\ttfamily std\-::vector} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\ttfamily std\-::vector} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...tfamily std\-::vector} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...mily std\-::vector} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...y std\-::vector} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1ObjArray.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1ObjArray.pdf used on input line 16. (pdftex.def) Requested size: 101.00117pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 將 物件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 將物 件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...n{DoxyCompactList}\small\item\em 將物件 從檔案讀出, 預設imp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...oxyCompactList}\small\item\em 將物件從 檔案讀出, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...CompactList}\small\item\em 將物件從檔 案讀出, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...pactList}\small\item\em 將物件從檔案 讀出, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...tList}\small\item\em 將物件從檔案讀 出, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...st}\small\item\em 將物件從檔案讀出 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...mall\item\em 將物件從檔案讀出, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...l\item\em 將物件從檔案讀出, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...案讀出, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. [118 <./classmeow_1_1ObjArray.pdf>] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 複 製, 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 複製 , 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...DoxyCompactList}\small\item\em 複製, 預 設使用operator= \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...yCompactList}\small\item\em 複製, 預設 使用operator= \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...mpactList}\small\item\em 複製, 預設使 用operator= \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...ctList}\small\item\em 複製, 預設使用 operator= \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 純 粹把 {\ttfamily std\-::vector} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 純粹 把 {\ttfamily std\-::vector} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 純粹把 {\ttfamily std\-::vector} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 純粹把 {\ttfamily std\-::vector} 包 起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 純粹把 {\ttfamily std\-::vector} 包起 來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 純粹把 {\ttfamily std\-::vector} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ... {\ttfamily std\-::vector} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...\ttfamily std\-::vector} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...family std\-::vector} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...ily std\-::vector} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ... std\-::vector} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 80 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 141. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 141. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 141. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 複 製, 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 複製 , 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 複製, 預 設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 複製, 預設 使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 複製, 預設使 用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.180 複製, 預設使用 operator= Your command was ignored. Type I to replace it with another command, or to continue without it. [119] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.184 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.184 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.184 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.184 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 187 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將 物件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物 件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件 從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從 檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從檔 案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從檔案 讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從檔案讀 出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從檔案讀出 , 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從檔案讀出, 預 設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從檔案讀出, 預設 implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 將物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.336 ...案讀出, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. [120] ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 347 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.412 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.412 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.412 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.412 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.412 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.412 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.433 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.439 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.439 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.439 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.439 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.439 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 444 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1ObjBase.tex ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一 切物件的\-Base, 並要求每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:切 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切 物件的\-Base, 並要求每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物 件的\-Base, 並要求每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件 的\-Base, 並要求每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的 \-Base, 並要求每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的\-Base, 並 要求每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的\-Base, 並要 求每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:求 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的\-Base, 並要求 每個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的\-Base, 並要求每 個物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的\-Base, 並要求每個 物件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的\-Base, 並要求每個物 件都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 一切物件的\-Base, 並要求每個物件 都要有read, write, create... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...物件的\-Base, 並要求每個物件都 要有read, write, create,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...件的\-Base, 並要求每個物件都要 有read, write, create, ..... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...的\-Base, 並要求每個物件都要有 read, write, create, ... ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...物件都要有read, write, create, ... 等 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...件都要有read, write, create, ... 等功 能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...都要有read, write, create, ... 等功能 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1ObjBase.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1ObjBase.pdf used on input line 16. (pdftex.def) Requested size: 306.28114pt x 341.43306pt. [121] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 將 物件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 將物 件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...n{DoxyCompactList}\small\item\em 將物件 從檔案讀出, 預設imp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...oxyCompactList}\small\item\em 將物件從 檔案讀出, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...CompactList}\small\item\em 將物件從檔 案讀出, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...pactList}\small\item\em 將物件從檔案 讀出, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...tList}\small\item\em 將物件從檔案讀 出, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...st}\small\item\em 將物件從檔案讀出 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...mall\item\em 將物件從檔案讀出, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...l\item\em 將物件從檔案讀出, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...案讀出, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 複 製, 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 複製 , 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...DoxyCompactList}\small\item\em 複製, 預 設使用operator= \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...yCompactList}\small\item\em 複製, 預設 使用operator= \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...mpactList}\small\item\em 複製, 預設使 用operator= \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...ctList}\small\item\em 複製, 預設使用 operator= \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳base... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...st}\small\item\em 用\-C-\/style string回 傳base的type name \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\small\item\em 用\-C-\/style string回傳 base的type name \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...item\em 用\-C-\/style string回傳base的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳base的type... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...actList}\small\item\em 用std\-::string回 傳base的type name \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...List}\small\item\em 用std\-::string回傳 base的type name \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...mall\item\em 用std\-::string回傳base的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. [122 <./classmeow_1_1ObjBase.pdf>] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一 切物件的\-Base, 並要求每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:切 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切 物件的\-Base, 並要求每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物 件的\-Base, 並要求每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件 的\-Base, 並要求每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的 \-Base, 並要求每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的\-Base, 並 要求每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的\-Base, 並要 求每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:求 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的\-Base, 並要求 每個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的\-Base, 並要求每 個物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的\-Base, 並要求每個 物件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的\-Base, 並要求每個物 件都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 一切物件的\-Base, 並要求每個物件 都要有read, write, creat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...物件的\-Base, 並要求每個物件都 要有read, write, create,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...件的\-Base, 並要求每個物件都要 有read, write, create, ..... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...的\-Base, 並要求每個物件都要有 read, write, create, ... ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...件都要有read, write, create, ... 等 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...都要有read, write, create, ... 等功 能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...要有read, write, create, ... 等功能 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 53 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 80. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 80. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 80. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 複 製, 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 複製 , 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 複製, 預 設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 複製, 預設 使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 複製, 預設使 用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.97 複製, 預設使用 operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 104 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.124 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.143 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. [123] ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 用 \-C-\/style string回傳base的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 用\-C-\/style string回 傳base的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 用\-C-\/style string回傳 base的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 用\-C-\/style string回傳base的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將 物件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物 件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件 從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從 檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從檔 案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從檔案 讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從檔案讀 出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從檔案讀出 , 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從檔案讀出, 預 設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從檔案讀出, 預設 implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 將物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.179 ...案讀出, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.183 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.187 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 190 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 用 std\-::string回傳base的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 用std\-::string回 傳base的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 用std\-::string回傳 base的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 用std\-::string回傳base的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.246 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.250 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.250 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. [124] ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.254 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 257 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.258 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1ObjDictionary.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純 粹把 {\ttfamily std\-::map} 包起來, 變成繼承自 \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹 把 {\ttfamily std\-::map} 包起來, 變成繼承自 \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::map} 包起來, 變成繼承自 \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::map} 包 起來, 變成繼承自 \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::map} 包起 來, 變成繼承自 \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 {\ttfamily std\-::map} 包起來 , 變成繼承自 \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...把 {\ttfamily std\-::map} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\ttfamily std\-::map} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\ttfamily std\-::map} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...tfamily std\-::map} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...mily std\-::map} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1ObjDictionary.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1ObjDictionary.pdf used on input line 16. (pdftex.def) Requested size: 159.33205pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 將 物件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 將物 件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...n{DoxyCompactList}\small\item\em 將物件 從檔案讀出, 預設imp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...oxyCompactList}\small\item\em 將物件從 檔案讀出, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...CompactList}\small\item\em 將物件從檔 案讀出, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...pactList}\small\item\em 將物件從檔案 讀出, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...tList}\small\item\em 將物件從檔案讀 出, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...st}\small\item\em 將物件從檔案讀出 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...mall\item\em 將物件從檔案讀出, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...l\item\em 將物件從檔案讀出, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...案讀出, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 複 製, 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 複製 , 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...DoxyCompactList}\small\item\em 複製, 預 設使用operator= \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...yCompactList}\small\item\em 複製, 預設 使用operator= \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...mpactList}\small\item\em 複製, 預設使 用operator= \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...ctList}\small\item\em 複製, 預設使用 operator= \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. [125 <./classmeow_1_1ObjDictionary.pdf>] ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 純 粹把 {\ttfamily std\-::map} 包起來, 變成繼承自 \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 純粹 把 {\ttfamily std\-::map} 包起來, 變成繼承自 \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 純粹把 {\ttfamily std\-::map} 包起來, 變成繼承自 \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 純粹把 {\ttfamily std\-::map} 包 起來, 變成繼承自 \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 純粹把 {\ttfamily std\-::map} 包起 來, 變成繼承自 \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 純粹把 {\ttfamily std\-::map} 包起來 , 變成繼承自 \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...把 {\ttfamily std\-::map} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ... {\ttfamily std\-::map} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...\ttfamily std\-::map} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...family std\-::map} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...ily std\-::map} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 78 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 127. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 127. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 127. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 複 製, 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 複製 , 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 複製, 預 設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 複製, 預設 使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 複製, 預設使 用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 複製, 預設使用 operator= Your command was ignored. Type I to replace it with another command, or to continue without it. [126] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.170 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 173 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. [127] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將 物件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物 件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件 從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從 檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從檔 案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從檔案 讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從檔案讀 出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從檔案讀出 , 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從檔案讀出, 預 設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從檔案讀出, 預設 implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 將物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 ...案讀出, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.337 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.339 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.339 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.339 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.339 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.339 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.341 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 344 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.345 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.345 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.345 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.345 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.345 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.386 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.413 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.413 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.413 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.413 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.413 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 418 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1ObjProperties.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 目 前擺爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 目前 擺爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擺 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 目前擺 爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:爛 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 目前擺爛 中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 目前擺爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. [128] File: classmeow_1_1ObjProperties.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1ObjProperties.pdf used on input line 16. (pdftex.def) Requested size: 128.03386pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 將 物件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 將物 件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...n{DoxyCompactList}\small\item\em 將物件 從檔案讀出, 預設imp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...oxyCompactList}\small\item\em 將物件從 檔案讀出, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...CompactList}\small\item\em 將物件從檔 案讀出, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...pactList}\small\item\em 將物件從檔案 讀出, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...tList}\small\item\em 將物件從檔案讀 出, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...st}\small\item\em 將物件從檔案讀出 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...mall\item\em 將物件從檔案讀出, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...l\item\em 將物件從檔案讀出, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...案讀出, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 複 製, 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 複製 , 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...DoxyCompactList}\small\item\em 複製, 預 設使用operator= \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...yCompactList}\small\item\em 複製, 預設 使用operator= \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...mpactList}\small\item\em 複製, 預設使 用operator= \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...ctList}\small\item\em 複製, 預設使用 operator= \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 目 前擺爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 目前 擺爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擺 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 目前擺 爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:爛 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 目前擺爛 中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 目前擺爛中 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 91. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 91. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 91. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 複 製, 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 複製 , 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 複製, 預 設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 複製, 預設 使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 複製, 預設使 用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.104 複製, 預設使用 operator= Your command was ignored. Type I to replace it with another command, or to continue without it. [129 <./classmeow_1_1ObjProperties.pdf>] [130] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.108 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 111 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.127 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.142 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.142 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.142 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.142 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.142 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.142 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將 物件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物 件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件 從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從 檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從檔 案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從檔案 讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從檔案讀 出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從檔案讀出 , 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從檔案讀出, 預 設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從檔案讀出, 預設 implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 ...案讀出, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.228 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.228 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.230 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.230 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.230 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.230 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.230 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.232 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 235 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.236 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. [131] ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.272 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.272 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.274 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 279 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1ObjSelector.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利 用register的概念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利用 register的概念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利用register的 概念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:概 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利用register的概 念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:念 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利用register的概念 , 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:達 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利用register的概念, 達 到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利用register的概念, 達到 runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 利用register的概念, 達到runtime用 string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...egister的概念, 達到runtime用string選 擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擇 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ster的概念, 達到runtime用string選擇 要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...r的概念, 達到runtime用string選擇要 new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...念, 達到runtime用string選擇要new的 class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:宣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 宣 告一個\-Obj\-Selector實體... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:告 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 宣告 一個\-Obj\-Selector實體... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...n{DoxyCompactList}\small\item\em 宣告一 個\-Obj\-Selector實體, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...oxyCompactList}\small\item\em 宣告一個 \-Obj\-Selector實體, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...all\item\em 宣告一個\-Obj\-Selector實 體, 並且註冊一個 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...\item\em 宣告一個\-Obj\-Selector實體 , 並且註冊一個 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...\em 宣告一個\-Obj\-Selector實體, 並 且註冊一個 \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... 宣告一個\-Obj\-Selector實體, 並且 註冊一個 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...告一個\-Obj\-Selector實體, 並且註 冊一個 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...一個\-Obj\-Selector實體, 並且註冊 一個 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...個\-Obj\-Selector實體, 並且註冊一 個 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:宣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 \begin{DoxyCompactList}\small\item\em 宣 告一個\-Obj\-Selector實體... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:告 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 \begin{DoxyCompactList}\small\item\em 宣告 一個\-Obj\-Selector實體... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...n{DoxyCompactList}\small\item\em 宣告一 個\-Obj\-Selector實體, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...oxyCompactList}\small\item\em 宣告一個 \-Obj\-Selector實體, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...all\item\em 宣告一個\-Obj\-Selector實 體, 並且註冊一個 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...\item\em 宣告一個\-Obj\-Selector實體 , 並且註冊一個 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...\em 宣告一個\-Obj\-Selector實體, 並 且註冊一個 \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ... 宣告一個\-Obj\-Selector實體, 並且 註冊一個 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...告一個\-Obj\-Selector實體, 並且註 冊一個 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...一個\-Obj\-Selector實體, 並且註冊 一個 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...個\-Obj\-Selector實體, 並且註冊一 個 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.19 ...\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 \begin{DoxyCompactList}\small\item\em 解 構子 \end{DoxyCompactList}\e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 \begin{DoxyCompactList}\small\item\em 解構 子 \end{DoxyCompactList}\e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 ...n{DoxyCompactList}\small\item\em 解構子 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 \begin{DoxyCompactList}\small\item\em 新 增(註冊) 一個\-Class (必... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 \begin{DoxyCompactList}\small\item\em 新增 (註冊) 一個\-Class (必... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...{DoxyCompactList}\small\item\em 新增(註 冊) 一個\-Class (必須... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...xyCompactList}\small\item\em 新增(註冊 ) 一個\-Class (必須要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...pactList}\small\item\em 新增(註冊) 一 個\-Class (必須要繼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...tList}\small\item\em 新增(註冊) 一個 \-Class (必須要繼承... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...\item\em 新增(註冊) 一個\-Class (必 須要繼承自 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...em\em 新增(註冊) 一個\-Class (必須 要繼承自 {\ttfamily \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...em 新增(註冊) 一個\-Class (必須要 繼承自 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...新增(註冊) 一個\-Class (必須要繼 承自 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...增(註冊) 一個\-Class (必須要繼承 自 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...(註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...ink{classmeow_1_1ObjBase}{Obj\-Base}}) 並 且給定其\-Name \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...{classmeow_1_1ObjBase}{Obj\-Base}}) 並且 給定其\-Name \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...assmeow_1_1ObjBase}{Obj\-Base}}) 並且給 定其\-Name \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...meow_1_1ObjBase}{Obj\-Base}}) 並且給定 其\-Name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...w_1_1ObjBase}{Obj\-Base}}) 並且給定其 \-Name \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 新 增(註冊) 一個\-Class (必... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 新增 (註冊) 一個\-Class (必... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...{DoxyCompactList}\small\item\em 新增(註 冊) 一個\-Class (必須... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...xyCompactList}\small\item\em 新增(註冊 ) 一個\-Class (必須要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...pactList}\small\item\em 新增(註冊) 一 個\-Class (必須要繼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...tList}\small\item\em 新增(註冊) 一個 \-Class (必須要繼承... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...\item\em 新增(註冊) 一個\-Class (必 須要繼承自 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...em\em 新增(註冊) 一個\-Class (必須 要繼承自 {\ttfamily \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...em 新增(註冊) 一個\-Class (必須要 繼承自 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...新增(註冊) 一個\-Class (必須要繼 承自 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...增(註冊) 一個\-Class (必須要繼承 自 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...(註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...ink{classmeow_1_1ObjBase}{Obj\-Base}}) 並 且默認type為name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...{classmeow_1_1ObjBase}{Obj\-Base}}) 並且 默認type為name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:默 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...assmeow_1_1ObjBase}{Obj\-Base}}) 並且默 認type為name \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:認 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...meow_1_1ObjBase}{Obj\-Base}}) 並且默認 type為name \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...1ObjBase}{Obj\-Base}}) 並且默認type為 name \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 依 照name刪除之前註冊過... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 依照 name刪除之前註冊過... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...xyCompactList}\small\item\em 依照name刪 除之前註冊過得\-Cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...ompactList}\small\item\em 依照name刪除 之前註冊過得\-Class ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...actList}\small\item\em 依照name刪除之 前註冊過得\-Class \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...List}\small\item\em 依照name刪除之前 註冊過得\-Class \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...t}\small\item\em 依照name刪除之前註 冊過得\-Class \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...small\item\em 依照name刪除之前註冊 過得\-Class \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...ll\item\em 依照name刪除之前註冊過 得\-Class \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...item\em 依照name刪除之前註冊過得 \-Class \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 取 得之前註冊過得\-Class \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 取得 之前註冊過得\-Class \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...n{DoxyCompactList}\small\item\em 取得之 前註冊過得\-Class \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...oxyCompactList}\small\item\em 取得之前 註冊過得\-Class \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...CompactList}\small\item\em 取得之前註 冊過得\-Class \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...pactList}\small\item\em 取得之前註冊 過得\-Class \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...tList}\small\item\em 取得之前註冊過 得\-Class \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...st}\small\item\em 取得之前註冊過得 \-Class \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 回 傳一個之前註冊過得\-C... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 回傳 一個之前註冊過得\-C... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...n{DoxyCompactList}\small\item\em 回傳一 個之前註冊過得\-Cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...oxyCompactList}\small\item\em 回傳一個 之前註冊過得\-Class ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...CompactList}\small\item\em 回傳一個之 前註冊過得\-Class new... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...pactList}\small\item\em 回傳一個之前 註冊過得\-Class new出... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...tList}\small\item\em 回傳一個之前註 冊過得\-Class new出來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...st}\small\item\em 回傳一個之前註冊 過得\-Class new出來的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...\small\item\em 回傳一個之前註冊過 得\-Class new出來的實... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...all\item\em 回傳一個之前註冊過得 \-Class new出來的實體... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...傳一個之前註冊過得\-Class new出 來的實體 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...一個之前註冊過得\-Class new出來 的實體 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...個之前註冊過得\-Class new出來的 實體 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...之前註冊過得\-Class new出來的實 體 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...前註冊過得\-Class new出來的實體 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 利 用type檢查是否有註冊... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 利用 type檢查是否有註冊... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...xyCompactList}\small\item\em 利用type檢 查是否有註冊過同... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ompactList}\small\item\em 利用type檢查 是否有註冊過同種... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...actList}\small\item\em 利用type檢查是 否有註冊過同種類... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...List}\small\item\em 利用type檢查是否 有註冊過同種類的\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...t}\small\item\em 利用type檢查是否有 註冊過同種類的\-Cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...small\item\em 利用type檢查是否有註 冊過同種類的\-Class ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ll\item\em 利用type檢查是否有註冊 過同種類的\-Class \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...item\em 利用type檢查是否有註冊過 同種類的\-Class \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...m\em 利用type檢查是否有註冊過同 種類的\-Class \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...m 利用type檢查是否有註冊過同種 類的\-Class \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...用type檢查是否有註冊過同種類 的\-Class \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...type檢查是否有註冊過同種類的 \-Class \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 利 用type尋找name \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 利用 type尋找name \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...xyCompactList}\small\item\em 利用type尋 找name \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...ompactList}\small\item\em 利用type尋找 name \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 回 傳所有註冊過的name \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 回傳 所有註冊過的name \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...n{DoxyCompactList}\small\item\em 回傳所 有註冊過的name \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...oxyCompactList}\small\item\em 回傳所有 註冊過的name \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...CompactList}\small\item\em 回傳所有註 冊過的name \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...pactList}\small\item\em 回傳所有註冊 過的name \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tList}\small\item\em 回傳所有註冊過 的name \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...st}\small\item\em 回傳所有註冊過的 name \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 將 一個物件寫到檔案裡(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 將一 個物件寫到檔案裡(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...n{DoxyCompactList}\small\item\em 將一個 物件寫到檔案裡(該... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...oxyCompactList}\small\item\em 將一個物 件寫到檔案裡(該物... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...CompactList}\small\item\em 將一個物件 寫到檔案裡(該物件... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...pactList}\small\item\em 將一個物件寫 到檔案裡(該物件必... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...tList}\small\item\em 將一個物件寫到 檔案裡(該物件必須... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...st}\small\item\em 將一個物件寫到檔 案裡(該物件必須要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...\small\item\em 將一個物件寫到檔案 裡(該物件必須要有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...all\item\em 將一個物件寫到檔案裡 (該物件必須要有註... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...item\em 將一個物件寫到檔案裡(該 物件必須要有註冊... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...m\em 將一個物件寫到檔案裡(該物 件必須要有註冊過) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...m 將一個物件寫到檔案裡(該物件 必須要有註冊過) \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...一個物件寫到檔案裡(該物件必 須要有註冊過) \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...個物件寫到檔案裡(該物件必須 要有註冊過) \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...物件寫到檔案裡(該物件必須要 有註冊過) \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...件寫到檔案裡(該物件必須要有 註冊過) \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...寫到檔案裡(該物件必須要有註 冊過) \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...到檔案裡(該物件必須要有註冊 過) \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...檔案裡(該物件必須要有註冊過 ) \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 從 檔案中讀取一個物件(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 從檔 案中讀取一個物件(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...n{DoxyCompactList}\small\item\em 從檔案 中讀取一個物件(該... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...oxyCompactList}\small\item\em 從檔案中 讀取一個物件(該物... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...CompactList}\small\item\em 從檔案中讀 取一個物件(該物件... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...pactList}\small\item\em 從檔案中讀取 一個物件(該物件必... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...tList}\small\item\em 從檔案中讀取一 個物件(該物件必須... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...st}\small\item\em 從檔案中讀取一個 物件(該物件必須要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\small\item\em 從檔案中讀取一個物 件(該物件必須要有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...all\item\em 從檔案中讀取一個物件 (該物件必須要有註... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...item\em 從檔案中讀取一個物件(該 物件必須要有註冊... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...m\em 從檔案中讀取一個物件(該物 件必須要有註冊過) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...m 從檔案中讀取一個物件(該物件 必須要有註冊過) \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...檔案中讀取一個物件(該物件必 須要有註冊過) \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...案中讀取一個物件(該物件必須 要有註冊過) \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...中讀取一個物件(該物件必須要 有註冊過) \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...讀取一個物件(該物件必須要有 註冊過) \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...取一個物件(該物件必須要有註 冊過) \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...一個物件(該物件必須要有註冊 過) \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...個物件(該物件必須要有註冊過 ) \end{DoxyCompactList}\en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利 用register的概念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利用 register的概念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利用register的 概念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:概 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利用register的概 念, 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:念 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利用register的概念 , 達到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:達 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利用register的概念, 達 到runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利用register的概念, 達到 runtime用string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 利用register的概念, 達到runtime用 string選擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...gister的概念, 達到runtime用string選 擇要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擇 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...ter的概念, 達到runtime用string選擇 要new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...的概念, 達到runtime用string選擇要 new的class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...念, 達到runtime用string選擇要new的 class Your command was ignored. Type I to replace it with another command, or to continue without it. [132] Underfull \hbox (badness 10000) detected at line 57 [][][] [] ! Package inputenc Error: Unicode char \u8:讓 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓 程式可以有不只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:程 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程 式可以有不只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式 可以有不只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式可 以有不只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式可以 有不只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式可以有 不只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式可以有不 只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式可以有不只 一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式可以有不只一 個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 cathook$<$ 讓程式可以有不只一個 {\ttfamily \hyperlink{classme... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:宣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣 告一個\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:告 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告 一個\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告一 個\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告一個 \-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告一個\-Obj\-Selector實 體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告一個\-Obj\-Selector實體 , 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告一個\-Obj\-Selector實體, 並 且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告一個\-Obj\-Selector實體, 並且 註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 宣告一個\-Obj\-Selector實體, 並且註 冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...一個\-Obj\-Selector實體, 並且註冊 一個 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...個\-Obj\-Selector實體, 並且註冊一 個 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.78 ...\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:宣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣 告一個\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:告 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告 一個\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告一 個\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告一個 \-Obj\-Selector實體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告一個\-Obj\-Selector實 體, 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告一個\-Obj\-Selector實體 , 並且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告一個\-Obj\-Selector實體, 並 且註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告一個\-Obj\-Selector實體, 並且 註冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 宣告一個\-Obj\-Selector實體, 並且註 冊一個 \hyperlink{classm... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ...一個\-Obj\-Selector實體, 並且註冊 一個 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ...個\-Obj\-Selector實體, 並且註冊一 個 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ...\-Obj\-Selector實體, 並且註冊一個 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 106. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 106. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 106. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.109 解 構子 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.109 解構 子 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.109 解構子 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新 增(註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增 (註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註 冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註冊 ) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註冊) 一 個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註冊) 一個 \-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註冊) 一個\-Class (必 須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註冊) 一個\-Class (必須 要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註冊) 一個\-Class (必須要 繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 新增(註冊) 一個\-Class (必須要繼 承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 ...(註冊) 一個\-Class (必須要繼承 自 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 ...註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 ...nk{classmeow_1_1ObjBase}{Obj\-Base}}) 並 且給定其\-Name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 ...classmeow_1_1ObjBase}{Obj\-Base}}) 並且 給定其\-Name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 ...ssmeow_1_1ObjBase}{Obj\-Base}}) 並且給 定其\-Name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 ...eow_1_1ObjBase}{Obj\-Base}}) 並且給定 其\-Name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.129 ..._1_1ObjBase}{Obj\-Base}}) 並且給定其 \-Name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新 增(註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增 (註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註 冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註冊 ) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註冊) 一 個\-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註冊) 一個 \-Class (必須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註冊) 一個\-Class (必 須要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註冊) 一個\-Class (必須 要繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註冊) 一個\-Class (必須要 繼承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 新增(註冊) 一個\-Class (必須要繼 承自 {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 ...(註冊) 一個\-Class (必須要繼承 自 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 ...註冊) 一個\-Class (必須要繼承自 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 ...nk{classmeow_1_1ObjBase}{Obj\-Base}}) 並 且默認type為name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 ...classmeow_1_1ObjBase}{Obj\-Base}}) 並且 默認type為name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:默 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 ...ssmeow_1_1ObjBase}{Obj\-Base}}) 並且默 認type為name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:認 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 ...eow_1_1ObjBase}{Obj\-Base}}) 並且默認 type為name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.145 ...ObjBase}{Obj\-Base}}) 並且默認type為 name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回 傳一個之前註冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳 一個之前註冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一 個之前註冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個 之前註冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個之 前註冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個之前 註冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個之前註 冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個之前註冊 過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個之前註冊過 得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個之前註冊過得 \-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 回傳一個之前註冊過得\-Class new出 來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 ...一個之前註冊過得\-Class new出來 的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 ...個之前註冊過得\-Class new出來的 實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 ...之前註冊過得\-Class new出來的實 體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.160 ...前註冊過得\-Class new出來的實體 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依 照name刪除之前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照 name刪除之前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪 除之前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪除 之前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪除之 前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪除之前 註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪除之前註 冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪除之前註冊 過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪除之前註冊過 得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.175 依照name刪除之前註冊過得 \-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利 用type檢查是否有註冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用 type檢查是否有註冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢 查是否有註冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查 是否有註冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是 否有註冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否 有註冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否有 註冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否有註 冊過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否有註冊 過同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否有註冊過 同種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否有註冊過同 種類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否有註冊過同種 類的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 利用type檢查是否有註冊過同種類 的\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 ...type檢查是否有註冊過同種類的 \-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取 得之前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取得 之前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取得之 前註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取得之前 註冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取得之前註 冊過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取得之前註冊 過得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取得之前註冊過 得\-Class Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.205 取得之前註冊過得 \-Class Your command was ignored. Type I to replace it with another command, or to continue without it. [133] ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 利 用type尋找name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 利用 type尋找name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 利用type尋 找name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.220 利用type尋找 name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回 傳所有註冊過的name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回傳 所有註冊過的name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回傳所 有註冊過的name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回傳所有 註冊過的name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回傳所有註 冊過的name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回傳所有註冊 過的name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回傳所有註冊過 的name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 回傳所有註冊過的 name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從 檔案中讀取一個物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔 案中讀取一個物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案 中讀取一個物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中 讀取一個物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀 取一個物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取 一個物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一 個物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一個 物件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一個物 件(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一個物件 (該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一個物件(該 物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一個物件(該物 件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一個物件(該物件 必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 從檔案中讀取一個物件(該物件必 須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...案中讀取一個物件(該物件必須 要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...中讀取一個物件(該物件必須要 有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...讀取一個物件(該物件必須要有 註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...取一個物件(該物件必須要有註 冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...一個物件(該物件必須要有註冊 過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...個物件(該物件必須要有註冊過 ) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將 一個物件寫到檔案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一 個物件寫到檔案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個 物件寫到檔案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物 件寫到檔案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件 寫到檔案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫 到檔案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到 檔案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到檔 案裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到檔案 裡(該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到檔案裡 (該物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到檔案裡(該 物件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到檔案裡(該物 件必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到檔案裡(該物件 必須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 將一個物件寫到檔案裡(該物件必 須要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 ...個物件寫到檔案裡(該物件必須 要有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 ...物件寫到檔案裡(該物件必須要 有註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 ...件寫到檔案裡(該物件必須要有 註冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:註 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 ...寫到檔案裡(該物件必須要有註 冊過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:冊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 ...到檔案裡(該物件必須要有註冊 過) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.269 ...檔案裡(該物件必須要有註冊過 ) Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1ObjType.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純 粹把給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹 把給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把 給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把給 定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把給定 的 {\ttfamily Type} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把給定的 {\ttfamily Type} 包 起來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把給定的 {\ttfamily Type} 包起 來, 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 純粹把給定的 {\ttfamily Type} 包起來 , 變成繼承自 \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...給定的 {\ttfamily Type} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...定的 {\ttfamily Type} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...的 {\ttfamily Type} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\ttfamily Type} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\ttfamily Type} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1ObjType.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1ObjType.pdf used on input line 16. (pdftex.def) Requested size: 172.1362pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...ompactList}\small\item\em constructor, 並 且給值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...actList}\small\item\em constructor, 並且 給值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...List}\small\item\em constructor, 並且給 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...t}\small\item\em constructor, 並且給值 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...ompactList}\small\item\em constructor, 並 且copy資料 \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...actList}\small\item\em constructor, 並且 copy資料 \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...}\small\item\em constructor, 並且copy資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...mall\item\em constructor, 並且copy資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [134 <./classmeow_1_1ObjType.pdf>] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 將 物件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 將物 件寫入檔案, 預設impl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...n{DoxyCompactList}\small\item\em 將物件 寫入檔案, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...oxyCompactList}\small\item\em 將物件寫 入檔案, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...CompactList}\small\item\em 將物件寫入 檔案, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...pactList}\small\item\em 將物件寫入檔 案, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...tList}\small\item\em 將物件寫入檔案 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...}\small\item\em 將物件寫入檔案, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...mall\item\em 將物件寫入檔案, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ... 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...入檔案, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 將 物件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 將物 件從檔案讀出, 預設i... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...n{DoxyCompactList}\small\item\em 將物件 從檔案讀出, 預設imp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...oxyCompactList}\small\item\em 將物件從 檔案讀出, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...CompactList}\small\item\em 將物件從檔 案讀出, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...pactList}\small\item\em 將物件從檔案 讀出, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...tList}\small\item\em 將物件從檔案讀 出, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...st}\small\item\em 將物件從檔案讀出 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...mall\item\em 將物件從檔案讀出, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...l\item\em 將物件從檔案讀出, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...案讀出, 預設implement為直接回傳 {\ttfamily false} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 回 傳一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 回傳 一個new出來的物件, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...n{DoxyCompactList}\small\item\em 回傳一 個new出來的物件, 預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...oxyCompactList}\small\item\em 回傳一個 new出來的物件, 預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...pactList}\small\item\em 回傳一個new出 來的物件, 預設implem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...tList}\small\item\em 回傳一個new出來 的物件, 預設implement... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...st}\small\item\em 回傳一個new出來的 物件, 預設implement為... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...\small\item\em 回傳一個new出來的物 件, 預設implement為直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...all\item\em 回傳一個new出來的物件 , 預設implement為直接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...tem\em 回傳一個new出來的物件, 預 設implement為直接回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...\em 回傳一個new出來的物件, 預設 implement為直接回傳 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...w出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 複 製, 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 複製 , 預設使用operator= \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...DoxyCompactList}\small\item\em 複製, 預 設使用operator= \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...yCompactList}\small\item\em 複製, 預設 使用operator= \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...mpactList}\small\item\em 複製, 預設使 用operator= \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...ctList}\small\item\em 複製, 預設使用 operator= \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 用 \-C-\/style string回傳這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...st}\small\item\em 用\-C-\/style string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...\small\item\em 用\-C-\/style string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...all\item\em 用\-C-\/style string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...\item\em 用\-C-\/style string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ... 用\-C-\/style string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 用 std\-::string回傳這個class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...actList}\small\item\em 用std\-::string回 傳這個class的type name... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...List}\small\item\em 用std\-::string回傳 這個class的type name \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...t}\small\item\em 用std\-::string回傳這 個class的type name \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...small\item\em 用std\-::string回傳這個 class的type name \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...em\em 用std\-::string回傳這個class的 type name \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純 粹把給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹 把給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹把 給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹把給 定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹把給定 的 {\ttfamily Type} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹把給定的 {\ttfamily Type} 包起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹把給定的 {\ttfamily Type} 包 起來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹把給定的 {\ttfamily Type} 包起 來, 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 純粹把給定的 {\ttfamily Type} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...給定的 {\ttfamily Type} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...定的 {\ttfamily Type} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...的 {\ttfamily Type} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ... {\ttfamily Type} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...\ttfamily Type} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 64 [][][] [] ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 constructor, 並 且copy資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 constructor, 並且 copy資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 constructor, 並且copy資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 constructor, 並且copy資料 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 110. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 110. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 110. [135] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複 製, 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複製 , 預設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複製, 預 設使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複製, 預設 使用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複製, 預設使 用operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.149 複製, 預設使用 operator= Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.153 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 156 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回 傳一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳 一個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一 個new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個 new出來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個new出 來的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個new出來 的物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個new出來的 物件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個new出來的物 件, 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個new出來的物件 , 預設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個new出來的物件, 預 設implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 回傳一個new出來的物件, 預設 implement為直接回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 ...個new出來的物件, 預設implement為 直接回傳 {\ttfamily N\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 ...new出來的物件, 預設implement為直 接回傳 {\ttfamily N\-U\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 ...出來的物件, 預設implement為直接 回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 ...來的物件, 預設implement為直接回 傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 ...的物件, 預設implement為直接回傳 {\ttfamily N\-U\-L\-L} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 用 \-C-\/style string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 用\-C-\/style string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 用\-C-\/style string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 用\-C-\/style string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 用\-C-\/style string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.195 用\-C-\/style string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 constructor, 並 且給值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 constructor, 並且 給值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 constructor, 並且給 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.225 constructor, 並且給值 Your command was ignored. Type I to replace it with another command, or to continue without it. [136] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將 物件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物 件從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件 從檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從 檔案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從檔 案讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從檔案 讀出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從檔案讀 出, 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從檔案讀出 , 預設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從檔案讀出, 預 設implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從檔案讀出, 預設 implement為直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 將物件從檔案讀出, 預設implement為 直接回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...件從檔案讀出, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...從檔案讀出, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...檔案讀出, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...案讀出, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.279 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.281 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.283 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.283 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.283 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.283 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.283 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.283 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 286 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.287 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.287 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.287 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.287 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.287 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.317 用 std\-::string回傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.317 用std\-::string回 傳這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.317 用std\-::string回傳 這個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.317 用std\-::string回傳這 個class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.317 用std\-::string回傳這個 class的type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.317 用std\-::string回傳這個class的 type name Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將 物件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物 件寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件 寫入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫 入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫入 檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫入檔 案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫入檔案 , 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫入檔案, 預 設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫入檔案, 預設 implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫入檔案, 預設implement為 直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 將物件寫入檔案, 預設implement為直 接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 ...件寫入檔案, 預設implement為直接 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 ...寫入檔案, 預設implement為直接回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.338 ...入檔案, 預設implement為直接回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 \mbox{\tt in} & {\em f} & 檔 案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 \mbox{\tt in} & {\em f} & 檔案 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em bin} & 是 否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em bin} & 是否 為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 \mbox{\tt in} & {\em bin} & 是否為 binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:模 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 ...\tt in} & {\em bin} & 是否為binary模 式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 ... in} & {\em bin} & 是否為binary模式 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:使 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.346 \mbox{\tt in} & {\em fg} & 使 用者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.346 \mbox{\tt in} & {\em fg} & 使用 者自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:者 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.346 \mbox{\tt in} & {\em fg} & 使用者 自訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.346 \mbox{\tt in} & {\em fg} & 使用者自 訂的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.346 \mbox{\tt in} & {\em fg} & 使用者自訂 的argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.346 ...{\tt in} & {\em fg} & 使用者自訂的 argument \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 349 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 成 功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 成功 或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 成功或 失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:失 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 成功或失 敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:敗 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 成功或失敗 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./structmeow_1_1PairToPair.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 有 .\-from.\-first, .from.\-second, .to.\-first, .to.\-second Your command was ignored. Type I to replace it with another command, or to continue without it. [137] ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 有 .\-from.\-first, .from.\-second, .to.\-first, .to.\-second Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 38 [][][] [] ) (./classmeow_1_1Photo.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 底 片 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 底片 Your command was ignored. Type I to replace it with another command, or to continue without it. [138] File: classmeow_1_1Photo.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1Photo.pdf used on input line 16. (pdftex.def) Requested size: 100.28897pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 參 照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 參照 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 重 設bitmap, focal 用猜的 \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 重設 bitmap, focal 用猜的 \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...ist}\small\item\em 重設bitmap, focal 用 猜的 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:猜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...}\small\item\em 重設bitmap, focal 用猜 的 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...mall\item\em 重設bitmap, focal 用猜的 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 重 設bitmap, focal \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 重設 bitmap, focal \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 重 設bitmap, focal, center \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 重設 bitmap, focal, center \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 回 傳{\ttfamily bitmap} \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 回傳 {\ttfamily bitmap} \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 回 傳{\ttfamily bitmap} 的參... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 回傳 {\ttfamily bitmap} 的參... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...small\item\em 回傳{\ttfamily bitmap} 的 參照(非constant) \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...ll\item\em 回傳{\ttfamily bitmap} 的參 照(非constant) \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...item\em 回傳{\ttfamily bitmap} 的參照 (非constant) \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:非 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...\em 回傳{\ttfamily bitmap} 的參照(非 constant) \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 設 定bitmap \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 設定 bitmap \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 回 傳focal length \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 回傳 focal length \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 設 定 focal length \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 設定 focal length \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 回 傳相應的 photo projection ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 回傳 相應的 photo projection ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...n{DoxyCompactList}\small\item\em 回傳相 應的 photo projection \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...oxyCompactList}\small\item\em 回傳相應 的 photo projection \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...CompactList}\small\item\em 回傳相應的 photo projection \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 設 定 photo projection \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 設定 photo projection \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 取 得照片中心點底片座標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 取得 照片中心點底片座標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...n{DoxyCompactList}\small\item\em 取得照 片中心點底片座標 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...oxyCompactList}\small\item\em 取得照片 中心點底片座標 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...CompactList}\small\item\em 取得照片中 心點底片座標 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...pactList}\small\item\em 取得照片中心 點底片座標 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...tList}\small\item\em 取得照片中心點 底片座標 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...st}\small\item\em 取得照片中心點底 片座標 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...\small\item\em 取得照片中心點底片 座標 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...all\item\em 取得照片中心點底片座 標 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...\item\em 取得照片中心點底片座標 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 取 得照片中心點底片座標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 取得 照片中心點底片座標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...n{DoxyCompactList}\small\item\em 取得照 片中心點底片座標 (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...oxyCompactList}\small\item\em 取得照片 中心點底片座標 (non... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...CompactList}\small\item\em 取得照片中 心點底片座標 (non-\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...pactList}\small\item\em 取得照片中心 點底片座標 (non-\/con... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...tList}\small\item\em 取得照片中心點 底片座標 (non-\/consta... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...st}\small\item\em 取得照片中心點底 片座標 (non-\/constant ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...\small\item\em 取得照片中心點底片 座標 (non-\/constant ref... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...all\item\em 取得照片中心點底片座 標 (non-\/constant refere... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...\item\em 取得照片中心點底片座標 (non-\/constant reference... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 設 定照片中心點底片座標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \begin{DoxyCompactList}\small\item\em 設定 照片中心點底片座標... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...n{DoxyCompactList}\small\item\em 設定照 片中心點底片座標 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...oxyCompactList}\small\item\em 設定照片 中心點底片座標 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...CompactList}\small\item\em 設定照片中 心點底片座標 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...pactList}\small\item\em 設定照片中心 點底片座標 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...tList}\small\item\em 設定照片中心點 底片座標 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...st}\small\item\em 設定照片中心點底 片座標 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...\small\item\em 設定照片中心點底片 座標 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...all\item\em 設定照片中心點底片座 標 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...\item\em 設定照片中心點底片座標 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [139 <./classmeow_1_1Photo.pdf>] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 回 傳bitmap寬 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 回傳 bitmap寬 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...CompactList}\small\item\em 回傳bitmap寬 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 回 傳bitmap高 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 回傳 bitmap高 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...CompactList}\small\item\em 回傳bitmap高 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em 回 傳bitmap的某pixel \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em 回傳 bitmap的某pixel \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...CompactList}\small\item\em 回傳bitmap的 某pixel \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...pactList}\small\item\em 回傳bitmap的某 pixel \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 設 定某pixel \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 設定 某pixel \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...n{DoxyCompactList}\small\item\em 設定某 pixel \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 檢 查某點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 檢查 某點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...n{DoxyCompactList}\small\item\em 檢查某 點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...oxyCompactList}\small\item\em 檢查某點 是否在底片範圍內 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...CompactList}\small\item\em 檢查某點是 否在底片範圍內 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...pactList}\small\item\em 檢查某點是否 在底片範圍內 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...tList}\small\item\em 檢查某點是否在 底片範圍內 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...st}\small\item\em 檢查某點是否在底 片範圍內 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...\small\item\em 檢查某點是否在底片 範圍內 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...all\item\em 檢查某點是否在底片範 圍內 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...\item\em 檢查某點是否在底片範圍 內 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...em\em 檢查某點是否在底片範圍內 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \begin{DoxyCompactList}\small\item\em 檢 查某點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \begin{DoxyCompactList}\small\item\em 檢查 某點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...n{DoxyCompactList}\small\item\em 檢查某 點是否在底片範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...oxyCompactList}\small\item\em 檢查某點 是否在底片範圍內 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...CompactList}\small\item\em 檢查某點是 否在底片範圍內 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...pactList}\small\item\em 檢查某點是否 在底片範圍內 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...tList}\small\item\em 檢查某點是否在 底片範圍內 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...st}\small\item\em 檢查某點是否在底 片範圍內 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...\small\item\em 檢查某點是否在底片 範圍內 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...all\item\em 檢查某點是否在底片範 圍內 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...\item\em 檢查某點是否在底片範圍 內 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...em\em 檢查某點是否在底片範圍內 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 \begin{DoxyCompactList}\small\item\em 取 得給照片座標中某點的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 \begin{DoxyCompactList}\small\item\em 取得 給照片座標中某點的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...n{DoxyCompactList}\small\item\em 取得給 照片座標中某點的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...oxyCompactList}\small\item\em 取得給照 片座標中某點的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...CompactList}\small\item\em 取得給照片 座標中某點的色彩 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...pactList}\small\item\em 取得給照片座 標中某點的色彩 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...tList}\small\item\em 取得給照片座標 中某點的色彩 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...st}\small\item\em 取得給照片座標中 某點的色彩 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...\small\item\em 取得給照片座標中某 點的色彩 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...all\item\em 取得給照片座標中某點 的色彩 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...\item\em 取得給照片座標中某點的 色彩 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...em\em 取得給照片座標中某點的色 彩 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.77 ...em 取得給照片座標中某點的色彩 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 \begin{DoxyCompactList}\small\item\em 取 得給照片座標中某點的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 \begin{DoxyCompactList}\small\item\em 取得 給照片座標中某點的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...n{DoxyCompactList}\small\item\em 取得給 照片座標中某點的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...oxyCompactList}\small\item\em 取得給照 片座標中某點的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...CompactList}\small\item\em 取得給照片 座標中某點的色彩 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...pactList}\small\item\em 取得給照片座 標中某點的色彩 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...tList}\small\item\em 取得給照片座標 中某點的色彩 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...st}\small\item\em 取得給照片座標中 某點的色彩 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...\small\item\em 取得給照片座標中某 點的色彩 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...all\item\em 取得給照片座標中某點 的色彩 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...\item\em 取得給照片座標中某點的 色彩 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...em\em 取得給照片座標中某點的色 彩 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.79 ...em 取得給照片座標中某點的色彩 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 \begin{DoxyCompactList}\small\item\em 將 資料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 \begin{DoxyCompactList}\small\item\em 將資 料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...n{DoxyCompactList}\small\item\em 將資料 寫入檔案 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...oxyCompactList}\small\item\em 將資料寫 入檔案 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...CompactList}\small\item\em 將資料寫入 檔案 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...pactList}\small\item\em 將資料寫入檔 案 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...tList}\small\item\em 將資料寫入檔案 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 \begin{DoxyCompactList}\small\item\em 將 資料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 \begin{DoxyCompactList}\small\item\em 將資 料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 ...n{DoxyCompactList}\small\item\em 將資料 讀入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 ...oxyCompactList}\small\item\em 將資料讀 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.85 ...CompactList}\small\item\em 將資料讀入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 \begin{DoxyCompactList}\small\item\em new一 個自己 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...n{DoxyCompactList}\small\item\em new一個 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...oxyCompactList}\small\item\em new一個自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...CompactList}\small\item\em new一個自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.89 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.89 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.89 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.89 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.93 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.93 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.93 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.100 底 片 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.100 底片 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:基 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 基 本上就是一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 基本 上就是一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 基本上 就是一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 基本上就 是一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 基本上就是 一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 基本上就是一 個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 基本上就是一個 {\ttfamily \hyperlink{classmeow_1_1Bitmap}{Bitma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 ...perlink{classmeow_1_1Bitmap}{Bitmap}} 加 上 {\ttfamily focal} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.102 ...link{classmeow_1_1Bitmap}{Bitmap}} 加上 {\ttfamily focal} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 104 [][][] [] ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.125 focal 預 設為 1 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.125 focal 預設 為 1 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.125 focal 預設為 1 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. [140] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直 接給定圖片, 焦距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接 給定圖片, 焦距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給 定圖片, 焦距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定 圖片, 焦距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定圖 片, 焦距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定圖片 , 焦距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:焦 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定圖片, 焦 距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定圖片, 焦距 用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定圖片, 焦距用 猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:猜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定圖片, 焦距用猜 的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.162 直接給定圖片, 焦距用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 \mbox{\tt in} & {\em bmp} & 給 定的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 \mbox{\tt in} & {\em bmp} & 給定 的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 \mbox{\tt in} & {\em bmp} & 給定的 圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 \mbox{\tt in} & {\em bmp} & 給定的圖 片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 \mbox{\tt in} & {\em bmp} & 給定的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直 接給定圖片與焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接 給定圖片與焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接給 定圖片與焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接給定 圖片與焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接給定圖 片與焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接給定圖片 與焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:與 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接給定圖片與 焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:焦 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接給定圖片與焦 距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.185 直接給定圖片與焦距 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 \mbox{\tt in} & {\em bmp} & 給 定的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 \mbox{\tt in} & {\em bmp} & 給定 的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 \mbox{\tt in} & {\em bmp} & 給定的 圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 \mbox{\tt in} & {\em bmp} & 給定的圖 片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 \mbox{\tt in} & {\em bmp} & 給定的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 \mbox{\tt in} & {\em f} & 給 定的焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 \mbox{\tt in} & {\em f} & 給定 的焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 \mbox{\tt in} & {\em f} & 給定的 焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:焦 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 \mbox{\tt in} & {\em f} & 給定的焦 距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.191 \mbox{\tt in} & {\em f} & 給定的焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直 接給定圖片, 焦距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接 給定圖片, 焦距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給 定圖片, 焦距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定 圖片, 焦距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖 片, 焦距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片 , 焦距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:焦 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦 距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦距 與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:與 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦距與 中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦距與中 心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦距與中心 點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦距與中心點 位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:位 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦距與中心點位 置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 直接給定圖片, 焦距與中心點位置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 \mbox{\tt in} & {\em bmp} & 給 定的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 \mbox{\tt in} & {\em bmp} & 給定 的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 \mbox{\tt in} & {\em bmp} & 給定的 圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 \mbox{\tt in} & {\em bmp} & 給定的圖 片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.215 \mbox{\tt in} & {\em bmp} & 給定的圖片 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.217 \mbox{\tt in} & {\em f} & 給 定的焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.217 \mbox{\tt in} & {\em f} & 給定 的焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.217 \mbox{\tt in} & {\em f} & 給定的 焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:焦 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.217 \mbox{\tt in} & {\em f} & 給定的焦 距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.217 \mbox{\tt in} & {\em f} & 給定的焦距 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 \mbox{\tt in} & {\em c} & 中 心點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 \mbox{\tt in} & {\em c} & 中心 點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 \mbox{\tt in} & {\em c} & 中心點 作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 \mbox{\tt in} & {\em c} & 中心點作 標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 \mbox{\tt in} & {\em c} & 中心點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 232. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 232. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 232. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.253 回 傳{\ttfamily bitmap} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.253 回傳 {\ttfamily bitmap} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 設 定bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.268 設定 bitmap Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.272 \mbox{\tt in} & {\em bmp} & 新 的 bitmap \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.272 \mbox{\tt in} & {\em bmp} & 新的 bitmap \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 275 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 新 的 {\ttfamily bitmap} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.276 新的 {\ttfamily bitmap} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回 傳{\ttfamily bitmap} 的參照(非constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回傳 {\ttfamily bitmap} 的參照(非constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回傳{\ttfamily bitmap} 的 參照(非constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回傳{\ttfamily bitmap} 的參 照(非constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回傳{\ttfamily bitmap} 的參照 (非constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:非 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.291 回傳{\ttfamily bitmap} 的參照(非 constant) Your command was ignored. Type I to replace it with another command, or to continue without it. [141] ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取 得照片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得 照片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照 片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片 中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片中 心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片中心 點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片中心點 底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片中心點底 片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片中心點底片 座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片中心點底片座 標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 取得照片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 308 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.309 一 個二維vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.309 一個 二維vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.309 一個二 維vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.309 一個二維 vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設 定照片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定 照片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照 片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片 中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片中 心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片中心 點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片中心點 底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片中心點底 片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片中心點底片 座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片中心點底片座 標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.324 設定照片中心點底片座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.328 \mbox{\tt in} & {\em c} & 新 的座標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.328 \mbox{\tt in} & {\em c} & 新的 座標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.328 \mbox{\tt in} & {\em c} & 新的座 標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.328 \mbox{\tt in} & {\em c} & 新的座標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 331 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.332 新 的座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.332 新的 座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.332 新的座 標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.332 新的座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取 得照片中心點底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得 照片中心點底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照 片中心點底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片 中心點底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片中 心點底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片中心 點底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片中心點 底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片中心點底 片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片中心點底片 座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片中心點底片座 標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.347 取得照片中心點底片座標 (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 349 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 一 個二維vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 一個 二維vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 一個二 維vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 一個二維 vector Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取 得給照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得 給照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給 照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照 片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片 座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座 標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座標 中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座標中 某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座標中某 點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座標中某點 的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座標中某點的 色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座標中某點的色 彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.365 取得給照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用 浮點數vector傳入, 所以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮 點數vector傳入, 所以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點 數vector傳入, 所以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數 vector傳入, 所以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳 入, 所以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳入 , 所以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳入, 所 以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳入, 所以 色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳入, 所以色 彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳入, 所以色彩 是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳入, 所以色彩是 經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:經 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 用浮點數vector傳入, 所以色彩是經 過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 ...點數vector傳入, 所以色彩是經過 渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:渲 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 ...數vector傳入, 所以色彩是經過渲 染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:染 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 ...vector傳入, 所以色彩是經過渲染 過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 ...tor傳入, 所以色彩是經過渲染過 的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 ...傳入, 所以色彩是經過渲染過的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 \mbox{\tt in} & {\em yx} & 底 片座標(原點為center)\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 \mbox{\tt in} & {\em yx} & 底片 座標(原點為center)\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 \mbox{\tt in} & {\em yx} & 底片座 標(原點為center)\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 \mbox{\tt in} & {\em yx} & 底片座標 (原點為center)\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 \mbox{\tt in} & {\em yx} & 底片座標(原 點為center)\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 ...\tt in} & {\em yx} & 底片座標(原點 為center)\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.371 ... in} & {\em yx} & 底片座標(原點為 center)\\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 374 [][][] [] ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取 得給照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得 給照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給 照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照 片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片 座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座 標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座標 中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座標中 某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座標中某 點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座標中某點 的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座標中某點的 色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座標中某點的色 彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得給照片座標中某點的色彩 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這 次是輸入大地座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次 是輸入大地座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次是 輸入大地座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次是輸 入大地座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次是輸入 大地座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次是輸入大 地座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:地 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次是輸入大地 座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次是輸入大地座 標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.392 這次是輸入大地座標 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.396 \mbox{\tt in} & {\em p} & 大 地座標p \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:地 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.396 \mbox{\tt in} & {\em p} & 大地 座標p \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.396 \mbox{\tt in} & {\em p} & 大地座 標p \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.396 \mbox{\tt in} & {\em p} & 大地座標 p \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 399 [][][] [] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. [142] ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.419 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.435 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.435 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.435 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.435 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 輸 入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 輸入 型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 輸入型 別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:別 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 輸入型別 是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 輸入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...}{Obj\-Base}} {\ttfamily const$\ast$} 這 裡假設實體其實是 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...bj\-Base}} {\ttfamily const$\ast$} 這裡 假設實體其實是 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:假 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...-Base}} {\ttfamily const$\ast$} 這裡假 設實體其實是 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...se}} {\ttfamily const$\ast$} 這裡假設 實體其實是 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...} {\ttfamily const$\ast$} 這裡假設實 體其實是 {\ttfamily \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:體 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...\ttfamily const$\ast$} 這裡假設實體 其實是 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...family const$\ast$} 這裡假設實體其 實是 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...ily const$\ast$} 這裡假設實體其實 是 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ... const$\ast$} 這裡假設實體其實是 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:事 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...erlink{classmeow_1_1Bitmap}{Bitmap}}. 事 實上這個method就只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...ink{classmeow_1_1Bitmap}{Bitmap}}. 事實 上這個method就只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...{classmeow_1_1Bitmap}{Bitmap}}. 事實上 這個method就只是幫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...assmeow_1_1Bitmap}{Bitmap}}. 事實上這 個method就只是幫忙... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...meow_1_1Bitmap}{Bitmap}}. 事實上這個 method就只是幫忙轉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...itmap}{Bitmap}}. 事實上這個method就 只是幫忙轉型然後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...ap}{Bitmap}}. 事實上這個method就只 是幫忙轉型然後呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...{Bitmap}}. 事實上這個method就只是 幫忙轉型然後呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...tmap}}. 事實上這個method就只是幫 忙轉型然後呼叫原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...p}}. 事實上這個method就只是幫忙 轉型然後呼叫原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:轉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 .... 事實上這個method就只是幫忙轉 型然後呼叫原本的{\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...實上這個method就只是幫忙轉型 然後呼叫原本的{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:然 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...上這個method就只是幫忙轉型然 後呼叫原本的{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...這個method就只是幫忙轉型然後 呼叫原本的{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...個method就只是幫忙轉型然後呼 叫原本的{\ttfamily cop... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...method就只是幫忙轉型然後呼叫 原本的{\ttfamily copy\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...ethod就只是幫忙轉型然後呼叫原 本的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...od就只是幫忙轉型然後呼叫原本 的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.437 ...只是幫忙轉型然後呼叫原本的 {\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 444 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 new一 個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 new一個 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 new一個自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 new一個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 466 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.467 一 個new出來的\-Photo$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.467 一個 new出來的\-Photo$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.467 一個new出 來的\-Photo$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.467 一個new出來 的\-Photo$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.467 一個new出來的 \-Photo$<$\-Pixel$>$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.486 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.486 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.486 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 488 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 ...r} {\ttfamily const{\ttfamily $\ast$} 形 式的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 ...{\ttfamily const{\ttfamily $\ast$} 形式 的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 ...tfamily const{\ttfamily $\ast$} 形式的 typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.508 回 傳focal length Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.508 回傳 focal length Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 設 定 focal length Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.523 設定 focal length Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.527 \mbox{\tt in} & {\em f} & 新 的 focal length \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.527 \mbox{\tt in} & {\em f} & 新的 focal length \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 530 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.531 新 的 {\ttfamily focal} length Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.531 新的 {\ttfamily focal} length Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.546 回 傳bitmap高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.546 回傳 bitmap高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:高 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.546 回傳bitmap高 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢 查某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查 某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某 點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點 是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是 否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是否 在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是否在 底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是否在底 片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是否在底片 範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是否在底片範 圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是否在底片範圍 內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.561 檢查某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. [143] [144] ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.565 \mbox{\tt in} & {\em yx} & 底 片座標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.565 \mbox{\tt in} & {\em yx} & 底片 座標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.565 \mbox{\tt in} & {\em yx} & 底片座 標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.565 \mbox{\tt in} & {\em yx} & 底片座標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 568 [][][] [] ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢 查某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查 某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某 點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點 是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是 否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是否 在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是否在 底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是否在底 片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是否在底片 範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是否在底片範 圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是否在底片範圍 內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.584 檢查某點是否在底片範圍內 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.588 \mbox{\tt in} & {\em p} & 大 地座標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:地 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.588 \mbox{\tt in} & {\em p} & 大地 座標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:座 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.588 \mbox{\tt in} & {\em p} & 大地座 標\\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.588 \mbox{\tt in} & {\em p} & 大地座標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 591 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.623 回 傳bitmap的某pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.623 回傳 bitmap的某pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.623 回傳bitmap的 某pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.623 回傳bitmap的某 pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.640 設 定某pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.640 設定 某pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.640 設定某 pixel Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 回 傳相應的 photo projection Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 回傳 相應的 photo projection Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 回傳相 應的 photo projection Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 回傳相應 的 photo projection Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.655 回傳相應的 photo projection Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.670 設 定 photo projection Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.670 設定 photo projection Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.687 將 資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.687 將資 料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.687 將資料 讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.687 將資料讀 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.687 將資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 689 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.690 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.690 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.690 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.709 參 照 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.709 參照 Your command was ignored. Type I to replace it with another command, or to continue without it. [145] ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.713 \mbox{\tt in} & {\em b} & 參 照來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.713 \mbox{\tt in} & {\em b} & 參照 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.713 \mbox{\tt in} & {\em b} & 參照來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.713 \mbox{\tt in} & {\em b} & 參照來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.729 重 設bitmap, focal 用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.729 重設 bitmap, focal 用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.729 重設bitmap, focal 用 猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:猜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.729 重設bitmap, focal 用猜 的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.729 重設bitmap, focal 用猜的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直 接代對角線, center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直接 代對角線, center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直接代 對角線, center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直接代對 角線, center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:角 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直接代對角 線, center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直接代對角線 , center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直接代對角線, center代 bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 focal直接代對角線, center代bitmap中 心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 ...直接代對角線, center代bitmap中心 點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.731 ...接代對角線, center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 \mbox{\tt in} & {\em bmp} & 新 的 {\ttfamily bitmap} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.735 \mbox{\tt in} & {\em bmp} & 新的 {\ttfamily bitmap} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.752 重 設bitmap, focal Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.752 重設 bitmap, focal Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.754 center代 bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.754 center代bitmap中 心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.754 center代bitmap中心 點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.754 center代bitmap中心點 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.758 \mbox{\tt in} & {\em bmp} & 新 的 {\ttfamily bitmap} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.758 \mbox{\tt in} & {\em bmp} & 新的 {\ttfamily bitmap} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.760 \mbox{\tt in} & {\em f} & 新 的 {\ttfamily focal} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.760 \mbox{\tt in} & {\em f} & 新的 {\ttfamily focal} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.778 重 設bitmap, focal, center Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.778 重設 bitmap, focal, center Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.782 \mbox{\tt in} & {\em bmp} & 新 的 {\ttfamily bitmap} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.782 \mbox{\tt in} & {\em bmp} & 新的 {\ttfamily bitmap} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.784 \mbox{\tt in} & {\em f} & 新 的 {\ttfamily focal} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.784 \mbox{\tt in} & {\em f} & 新的 {\ttfamily focal} \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.786 \mbox{\tt in} & {\em c} & 新 的中心點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.786 \mbox{\tt in} & {\em c} & 新的 中心點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.786 \mbox{\tt in} & {\em c} & 新的中 心點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:心 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.786 \mbox{\tt in} & {\em c} & 新的中心 點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.786 \mbox{\tt in} & {\em c} & 新的中心點 作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.786 ...x{\tt in} & {\em c} & 新的中心點作 標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.786 ...tt in} & {\em c} & 新的中心點作標 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.802 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.802 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.802 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 804 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.805 {\ttfamily std\-::string} 形 式的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.805 {\ttfamily std\-::string} 形式 的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.805 {\ttfamily std\-::string} 形式的 typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.824 回 傳bitmap寬 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.824 回傳 bitmap寬 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.824 回傳bitmap寬 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.841 將 資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.841 將資 料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.841 將資料 寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.841 將資料寫 入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.841 將資料寫入 檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.841 將資料寫入檔 案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.841 將資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 843 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.844 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.844 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.844 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1PhotoProjection.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [146] File: classmeow_1_1PhotoProjection.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1PhotoProjection.pdf used on input line 16 . (pdftex.def) Requested size: 147.95229pt x 56.9055pt. [147 <./classmeow_1_1PhotoProjection.pdf>] Underfull \hbox (badness 10000) detected at line 68 [][][] [] Underfull \hbox (badness 10000) detected at line 127 [][][] [] [148] Underfull \hbox (badness 10000) detected at line 160 [][][] [] Underfull \hbox (badness 10000) detected at line 183 [][][] [] Underfull \hbox (badness 10000) detected at line 214 [][][] [] [149] Underfull \hbox (badness 10000) detected at line 252 [][][] [] [150] Underfull \hbox (badness 10000) detected at line 344 [][][] [] Underfull \hbox (badness 10000) detected at line 370 [][][] [] Underfull \hbox (badness 10000) detected at line 373 [][][] [] ) (./classmeow_1_1ReaderWriter__double.tex) (./classmeow_1_1ReaderWriter__int.tex [151]) (./classmeow_1_1ReaderWriter__size__t.tex [152]) (./classmeow_1_1ReaderWriter__string.tex) (./classmeow_1_1RegisterInterface.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [153] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 51. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 51. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 51. ) (./classmeow_1_1RGB.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [154] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. [155]) (./classmeow_1_1RGBf.tex File: classmeow_1_1RGBf.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1RGBf.pdf used on input line 11. (pdftex.def) Requested size: 103.13774pt x 56.9055pt. [156 <./classmeow_1_1RGBf.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 89. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 89. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 89. [157]) (./classmeow_1_1RGBf__Space.tex ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以 浮點數{\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮 點數{\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點 數{\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...d}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...bfseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...eries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...es Green}, {\bfseries Blue} 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...Green}, {\bfseries Blue} 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...en}, {\bfseries Blue} 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ..., {\bfseries Blue} 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...\bfseries Blue} 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...series Blue} 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ies Blue} 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1RGBf__Space.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1RGBf__Space.pdf used on input line 16. (pdftex.def) Requested size: 142.9746pt x 56.9055pt. [158 <./classmeow_1_1RGBf__Space.pdf>] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以 浮點數{\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮 點數{\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點 數{\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...{\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...fseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...s Green}, {\bfseries Blue} 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...reen}, {\bfseries Blue} 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...n}, {\bfseries Blue} 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ... {\bfseries Blue} 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...bfseries Blue} 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...eries Blue} 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...es Blue} 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其 中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中 範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範 圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍 都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都 介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:介 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介 於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於 0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 92 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. [159] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 276. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 276. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 276. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 287. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 287. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 287. [160]) (./classmeow_1_1RGBi.tex File: classmeow_1_1RGBi.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1RGBi.pdf used on input line 11. (pdftex.def) Requested size: 102.42555pt x 56.9055pt. [161 <./classmeow_1_1RGBi.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 89. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 89. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 89. ) (./classmeow_1_1RGBi__Space.tex ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以 整數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個值... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:整 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以整 數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個值... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以整數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個值... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...d}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...bfseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...eries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...es Green}, {\bfseries Blue} 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...Green}, {\bfseries Blue} 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...en}, {\bfseries Blue} 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ..., {\bfseries Blue} 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...\bfseries Blue} 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...series Blue} 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ies Blue} 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1RGBi__Space.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1RGBi__Space.pdf used on input line 16. (pdftex.def) Requested size: 125.19275pt x 56.9055pt. [162] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以 整數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:整 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以整 數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以整數 {\bfseries Red}, {\bfseries Green}, {\bfseries Blue} 三個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...{\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...fseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...s Green}, {\bfseries Blue} 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...reen}, {\bfseries Blue} 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...n}, {\bfseries Blue} 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ... {\bfseries Blue} 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...bfseries Blue} 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...eries Blue} 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...es Blue} 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其 中範圍都介於0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中 範圍都介於0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範 圍都介於0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍 都介於0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都 介於0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:介 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介 於0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於 0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0$\sim$255之 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0$\sim$255之間 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 92 [][][] [] [163 <./classmeow_1_1RGBi__Space.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. [164] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 276. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 276. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 276. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 287. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 287. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 287. [165]) (./classmeow_1_1Rotation3D.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1Rotation3D.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1Rotation3D.pdf used on input line 16. (pdftex.def) Requested size: 169.99962pt x 85.35826pt. [166 <./classmeow_1_1Rotation3D.pdf>] Underfull \hbox (badness 10000) detected at line 68 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 106. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 106. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 106. [167] Underfull \hbox (badness 10000) detected at line 173 [][][] [] Underfull \hbox (badness 10000) detected at line 198 [][][] [] Overfull \hbox (48.31256pt too wide) detected at line 223 [] [] [] [] Overfull \hbox (48.31256pt too wide) detected at line 224 [] [] [] [] Overfull \hbox (48.31256pt too wide) detected at line 225 [] [] [] [] [168] Underfull \hbox (badness 10000) detected at line 235 [][][] [] Underfull \hbox (badness 10000) detected at line 262 [][][] [] Underfull \hbox (badness 10000) detected at line 292 [][][] [] Underfull \hbox (badness 10000) detected at line 316 [][][] [] [169] Underfull \hbox (badness 10000) detected at line 397 [][][] [] Underfull \hbox (badness 10000) detected at line 422 [][][] [] Underfull \hbox (badness 10000) detected at line 450 [][][] [] [170] Underfull \hbox (badness 10000) detected at line 484 [][][] [] Underfull \hbox (badness 10000) detected at line 511 [][][] [] ) (./structmeow_1_1SceneInfo.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [171] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 78. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 78. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 78. ) (./classmeow_1_1SegmentTree.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 中 文名 {\ttfamily 線段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:文 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 中文 名 {\ttfamily 線段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 中文名 {\ttfamily 線段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 中文名 {\ttfamily 線 段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 中文名 {\ttfamily 線段 樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 中文名 {\ttfamily 線段樹 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 ...ompactList}\small\item\em constructor, 並 且複製資料 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 ...actList}\small\item\em constructor, 並且 複製資料 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 ...List}\small\item\em constructor, 並且複 製資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 ...t}\small\item\em constructor, 並且複製 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 ...small\item\em constructor, 並且複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.21 ...ll\item\em constructor, 並且複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 複 製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 複製 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 回 傳size \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 回傳 size \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. [172] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 將 資料清空且設定維護範... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 將資 料清空且設定維護範... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...n{DoxyCompactList}\small\item\em 將資料 清空且設定維護範... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...oxyCompactList}\small\item\em 將資料清 空且設定維護範圍... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...CompactList}\small\item\em 將資料清空 且設定維護範圍是 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...pactList}\small\item\em 將資料清空且 設定維護範圍是 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...tList}\small\item\em 將資料清空且設 定維護範圍是 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...st}\small\item\em 將資料清空且設定 維護範圍是 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\small\item\em 將資料清空且設定維 護範圍是 {\ttfamily 0$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...all\item\em 將資料清空且設定維護 範圍是 {\ttfamily 0$\si... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\item\em 將資料清空且設定維護範 圍是 {\ttfamily 0$\sim$s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...em\em 將資料清空且設定維護範圍 是 {\ttfamily 0$\sim$size... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...em 將資料清空且設定維護範圍是 {\ttfamily 0$\sim$size-\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回 傳區間 {\ttfamily }\mbox{[}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 回傳 區間 {\ttfamily }\mbox{[}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...n{DoxyCompactList}\small\item\em 回傳區 間 {\ttfamily }\mbox{[}fi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...oxyCompactList}\small\item\em 回傳區間 {\ttfamily }\mbox{[}first... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...\ttfamily }\mbox{[}first,last\mbox{]} (邊 界都含) 的區間值 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:界 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...family }\mbox{[}first,last\mbox{]} (邊界 都含) 的區間值 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...ily }\mbox{[}first,last\mbox{]} (邊界都 含) 的區間值 \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ... }\mbox{[}first,last\mbox{]} (邊界都含 ) 的區間值 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...ox{[}first,last\mbox{]} (邊界都含) 的 區間值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...[}first,last\mbox{]} (邊界都含) 的區 間值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...irst,last\mbox{]} (邊界都含) 的區間 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...t,last\mbox{]} (邊界都含) 的區間值 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 將 區間 {\ttfamily }\mbox{[}fir... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 將區 間 {\ttfamily }\mbox{[}fir... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...n{DoxyCompactList}\small\item\em 將區間 {\ttfamily }\mbox{[}first... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...{\ttfamily }\mbox{[}first,last\mbox{]} 全 部都設定成 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...tfamily }\mbox{[}first,last\mbox{]} 全部 都設定成 {\ttfamily va... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...mily }\mbox{[}first,last\mbox{]} 全部都 設定成 {\ttfamily value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...y }\mbox{[}first,last\mbox{]} 全部都設 定成 {\ttfamily value} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...\mbox{[}first,last\mbox{]} 全部都設定 成 {\ttfamily value} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...ox{[}first,last\mbox{]} 全部都設定成 {\ttfamily value} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 將 區間 {\ttfamily }\mbox{[}fir... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 將區 間 {\ttfamily }\mbox{[}fir... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...n{DoxyCompactList}\small\item\em 將區間 {\ttfamily }\mbox{[}first... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...{\ttfamily }\mbox{[}first,last\mbox{]} 全 部都加上 {\ttfamily de... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...tfamily }\mbox{[}first,last\mbox{]} 全部 都加上 {\ttfamily delta... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...mily }\mbox{[}first,last\mbox{]} 全部都 加上 {\ttfamily delta} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...y }\mbox{[}first,last\mbox{]} 全部都加 上 {\ttfamily delta} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...\mbox{[}first,last\mbox{]} 全部都加上 {\ttfamily delta} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 中 文名 {\ttfamily 線段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:文 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 中文 名 {\ttfamily 線段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 中文名 {\ttfamily 線段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 中文名 {\ttfamily 線 段樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 中文名 {\ttfamily 線段 樹} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 中文名 {\ttfamily 線段樹 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維 護一個陣列, 並且讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護 一個陣列, 並且讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一 個陣列, 並且讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個 陣列, 並且讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣 列, 並且讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:列 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列 , 並且讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列, 並 且讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列, 並且 讓user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讓 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列, 並且讓 user可以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列, 並且讓user可 以有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列, 並且讓user可以 有區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列, 並且讓user可以有 區間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 維護一個陣列, 並且讓user可以有區 間查詢, 區間修改的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...一個陣列, 並且讓user可以有區間 查詢, 區間修改的小... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...個陣列, 並且讓user可以有區間查 詢, 區間修改的小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...陣列, 並且讓user可以有區間查詢 , 區間修改的小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ..., 並且讓user可以有區間查詢, 區 間修改的小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...並且讓user可以有區間查詢, 區間 修改的小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:修 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...且讓user可以有區間查詢, 區間修 改的小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:改 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...讓user可以有區間查詢, 區間修改 的小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...user可以有區間查詢, 區間修改的 小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...r可以有區間查詢, 區間修改的小 東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:東 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...以有區間查詢, 區間修改的小東 東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:東 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 ...有區間查詢, 區間修改的小東東 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...{\ttfamily n}) &\PBS\centering Scalar &取 得第 {\ttfamily n} 維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...tfamily n}) &\PBS\centering Scalar &取得 第 {\ttfamily n} 維度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...mily n}) &\PBS\centering Scalar &取得第 {\ttfamily n} 維度量 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...tering Scalar &取得第 {\ttfamily n} 維 度量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...ing Scalar &取得第 {\ttfamily n} 維度 量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ... Scalar &取得第 {\ttfamily n} 維度量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:權 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...} {\ttfamily v}) &\PBS\centering bool &權 重比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...\ttfamily v}) &\PBS\centering bool &權重 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...family v}) &\PBS\centering bool &權重比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...ily v}) &\PBS\centering bool &權重比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...{\ttfamily s}) &\PBS\centering Scalar &相 乘 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乘 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...tfamily s}) &\PBS\centering Scalar &相乘 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...{\ttfamily s}) &\PBS\centering Scalar &相 加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 ...tfamily s}) &\PBS\centering Scalar &相加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...{\ttfamily s}) &\PBS\centering Scalar &相 差 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...tfamily s}) &\PBS\centering Scalar &相差 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...r {\ttfamily s}) &\PBS\centering bool &大 小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...\ttfamily s}) &\PBS\centering bool &大小 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...family s}) &\PBS\centering bool &大小比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...ily s}) &\PBS\centering bool &大小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ... {\ttfamily v}) &\PBS\centering Value &相 加(位移) \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...ttfamily v}) &\PBS\centering Value &相加 (位移) \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:位 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...mily v}) &\PBS\centering Value &相加(位 移) \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...y v}) &\PBS\centering Value &相加(位移 ) \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ... {\ttfamily n}) &\PBS\centering Value &每 個\-Value都一樣, \\\cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...ttfamily n}) &\PBS\centering Value &每個 \-Value都一樣, \\\cline... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...}) &\PBS\centering Value &每個\-Value都 一樣, \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...&\PBS\centering Value &每個\-Value都一 樣, \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...BS\centering Value &每個\-Value都一樣 , \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) in alignment at lines 47--58 [][][][][][] [] ! Package inputenc Error: Unicode char \u8:長 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 長 為 {\ttfamily n} 的區間的值$\vert$ $\vert$const $\vert$\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 長為 {\ttfamily n} 的區間的值$\vert$ $\vert$const $\vert$\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 長為 {\ttfamily n} 的 區間的值$\vert$ $\vert$const $\vert$\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 長為 {\ttfamily n} 的區 間的值$\vert$ $\vert$const $\vert$\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 長為 {\ttfamily n} 的區間 的值$\vert$ $\vert$const $\vert$\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 長為 {\ttfamily n} 的區間的 值$\vert$ $\vert$const $\vert$\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 長為 {\ttfamily n} 的區間的值 $\vert$ $\vert$const $\vert$\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ... {\ttfamily v}) $\vert$\-Value $\vert$ 區 間合併後的值 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...ttfamily v}) $\vert$\-Value $\vert$ 區間 合併後的值 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...amily v}) $\vert$\-Value $\vert$ 區間合 併後的值 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...ly v}) $\vert$\-Value $\vert$ 區間合併 後的值 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...v}) $\vert$\-Value $\vert$ 區間合併後 的值 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ... $\vert$\-Value $\vert$ 區間合併後的 值 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...vert$\-Value $\vert$ 區間合併後的值 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若 要維護區間最小值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要 維護區間最小值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維 護區間最小值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護 區間最小值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區 間最小值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區間 最小值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區間最 小值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區間最小 值, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區間最小值 , 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區間最小值, 即 每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區間最小值, 即每 次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \item 若要維護區間最小值, 即每次 都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... 若要維護區間最小值, 即每次都 是詢問範圍 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...要維護區間最小值, 即每次都是 詢問範圍 {\ttfamily \m... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...維護區間最小值, 即每次都是詢 問範圍 {\ttfamily \mbox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...護區間最小值, 即每次都是詢問 範圍 {\ttfamily \mbox{[}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...區間最小值, 即每次都是詢問範 圍 {\ttfamily \mbox{[}a, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...間最小值, 即每次都是詢問範圍 {\ttfamily \mbox{[}a, b\m... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...圍 {\ttfamily \mbox{[}a, b\mbox{]}} 的 最小值, 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... {\ttfamily \mbox{[}a, b\mbox{]}} 的最 小值, 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...{\ttfamily \mbox{[}a, b\mbox{]}} 的最小 值, 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...tfamily \mbox{[}a, b\mbox{]}} 的最小值 , 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...ly \mbox{[}a, b\mbox{]}} 的最小值, 則 可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...\mbox{[}a, b\mbox{]}} 的最小值, 則可 以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...ox{[}a, b\mbox{]}} 的最小值, 則可以 定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...[}a, b\mbox{]}} 的最小值, 則可以定 義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ..., b\mbox{]}} 的最小值, 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \item {\ttfamily operator+} 為 '回傳相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \item {\ttfamily operator+} 為 '回 傳相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \item {\ttfamily operator+} 為 '回傳 相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \item {\ttfamily operator+} 為 '回傳相 加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \item {\ttfamily operator+} 為 '回傳相加 值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...{\ttfamily operator+} 為 '回傳相加值 ' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \item {\ttfamily operator$\ast$} 為 '回傳$\ast$this' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \item {\ttfamily operator$\ast$} 為 '回 傳$\ast$this' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \item {\ttfamily operator$\ast$} 為 '回傳 $\ast$this' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \item {\ttfamily operator$\vert$} 為 '回傳std\-::min($\ast$this, v)' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \item {\ttfamily operator$\vert$} 為 '回 傳std\-::min($\ast$this, v)' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \item {\ttfamily operator$\vert$} 為 '回傳 std\-::min($\ast$this, v)' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若 要維護區間最總和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要 維護區間最總和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維 護區間最總和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護 區間最總和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區 間最總和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區間 最總和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區間最 總和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:總 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區間最總 和, 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:和 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區間最總和 , 即每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區間最總和, 即 每次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區間最總和, 即每 次都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \item 若要維護區間最總和, 即每次 都是詢問範圍 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ... 若要維護區間最總和, 即每次都 是詢問範圍 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...要維護區間最總和, 即每次都是 詢問範圍 {\ttfamily \m... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...維護區間最總和, 即每次都是詢 問範圍 {\ttfamily \mbox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...護區間最總和, 即每次都是詢問 範圍 {\ttfamily \mbox{[}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...區間最總和, 即每次都是詢問範 圍 {\ttfamily \mbox{[}a, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...間最總和, 即每次都是詢問範圍 {\ttfamily \mbox{[}a, b\m... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...圍 {\ttfamily \mbox{[}a, b\mbox{]}} 的 總和, 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:總 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ... {\ttfamily \mbox{[}a, b\mbox{]}} 的總 和, 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:和 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...{\ttfamily \mbox{[}a, b\mbox{]}} 的總和 , 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...amily \mbox{[}a, b\mbox{]}} 的總和, 則 可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...ly \mbox{[}a, b\mbox{]}} 的總和, 則可 以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...\mbox{[}a, b\mbox{]}} 的總和, 則可以 定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...ox{[}a, b\mbox{]}} 的總和, 則可以定 義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...[}a, b\mbox{]}} 的總和, 則可以定義 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \item {\ttfamily operator+} 為 '回傳相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \item {\ttfamily operator+} 為 '回 傳相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \item {\ttfamily operator+} 為 '回傳 相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \item {\ttfamily operator+} 為 '回傳相 加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \item {\ttfamily operator+} 為 '回傳相加 值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...{\ttfamily operator+} 為 '回傳相加值 ' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \item {\ttfamily operator$\ast$} 為 '回傳($\ast$this) $\ast$ n' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \item {\ttfamily operator$\ast$} 為 '回 傳($\ast$this) $\ast$ n' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \item {\ttfamily operator$\ast$} 為 '回傳 ($\ast$this) $\ast$ n' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \item {\ttfamily operator$\vert$} 為 '回傳相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \item {\ttfamily operator$\vert$} 為 '回 傳相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \item {\ttfamily operator$\vert$} 為 '回傳 相加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...{\ttfamily operator$\vert$} 為 '回傳相 加值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...tfamily operator$\vert$} 為 '回傳相加 值' Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...mily operator$\vert$} 為 '回傳相加值 ' Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 77 [][][] [] ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 並 且複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 並且 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 並且複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 並且複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 並且複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 並且複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. [173] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 複 製 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 複製 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 將 區間 {\ttfamily }\mbox{[}first,last\mbox{]} 全部都加上 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 將區 間 {\ttfamily }\mbox{[}first,last\mbox{]} 全部都加上 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 將區間 {\ttfamily }\mbox{[}first,last\mbox{]} 全部都加上 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 ...\ttfamily }\mbox{[}first,last\mbox{]} 全 部都加上 {\ttfamily de... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 ...family }\mbox{[}first,last\mbox{]} 全部 都加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 ...ily }\mbox{[}first,last\mbox{]} 全部都 加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 ... }\mbox{[}first,last\mbox{]} 全部都加 上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 ...mbox{[}first,last\mbox{]} 全部都加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 將 區間 {\ttfamily }\mbox{[}first,last\mbox{]} 全部都設定成 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 將區 間 {\ttfamily }\mbox{[}first,last\mbox{]} 全部都設定成 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 將區間 {\ttfamily }\mbox{[}first,last\mbox{]} 全部都設定成 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...\ttfamily }\mbox{[}first,last\mbox{]} 全 部都設定成 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...family }\mbox{[}first,last\mbox{]} 全部 都設定成 {\ttfamily va... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...ily }\mbox{[}first,last\mbox{]} 全部都 設定成 {\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ... }\mbox{[}first,last\mbox{]} 全部都設 定成 {\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...mbox{[}first,last\mbox{]} 全部都設定 成 {\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.193 ...x{[}first,last\mbox{]} 全部都設定成 {\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 回 傳區間 {\ttfamily }\mbox{[}first,last\mbox{]} (邊界都含) 的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 回傳 區間 {\ttfamily }\mbox{[}first,last\mbox{]} (邊界都含) 的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 回傳區 間 {\ttfamily }\mbox{[}first,last\mbox{]} (邊界都含) 的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 回傳區間 {\ttfamily }\mbox{[}first,last\mbox{]} (邊界都含) 的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...ttfamily }\mbox{[}first,last\mbox{]} (邊 界都含) 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:界 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...amily }\mbox{[}first,last\mbox{]} (邊界 都含) 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...ly }\mbox{[}first,last\mbox{]} (邊界都 含) 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...}\mbox{[}first,last\mbox{]} (邊界都含 ) 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...x{[}first,last\mbox{]} (邊界都含) 的 區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...}first,last\mbox{]} (邊界都含) 的區 間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...rst,last\mbox{]} (邊界都含) 的區間 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.209 ...,last\mbox{]} (邊界都含) 的區間值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將 資料清空且設定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資 料清空且設定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料 清空且設定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清 空且設定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空 且設定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且 設定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且設 定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且設定 維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且設定維 護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且設定維護 範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且設定維護範 圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且設定維護範圍 是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.224 將資料清空且設定維護範圍是 {\ttfamily 0$\sim$size-\/1} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.239 回 傳size Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.239 回傳 size Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1Self.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [174] LaTeX Font Info: Try loading font information for OMS+pcr on input line 62. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/omspcr.fd File: omspcr.fd ) LaTeX Font Info: Font shape `OMS/pcr/m/n' in size <7> not available (Font) Font shape `OMS/cmsy/m/n' tried instead on input line 62. [175] Underfull \hbox (badness 10000) detected at line 140 [][][] [] Underfull \hbox (badness 10000) detected at line 143 [][][] [] Underfull \hbox (badness 10000) detected at line 161 [][][] [] [176] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 251. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 251. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 251. Underfull \hbox (badness 10000) detected at line 279 [][][] [] [177] Underfull \hbox (badness 10000) detected at line 305 [][][] [] Underfull \hbox (badness 10000) detected at line 328 [][][] [] Underfull \hbox (badness 10000) detected at line 331 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 359. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 359. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 374. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 374. Underfull \hbox (badness 10000) detected at line 410 [][][] [] [178] Underfull \hbox (badness 10000) detected at line 453 [][][] [] ) (./classmeow_1_1SplayTree.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是 一種神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一 種神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種 神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:神 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神 乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乎 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎 其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其 技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:技 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技 的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技的 資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技的資 料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技的資料 結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技的資料結 構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技的資料結構 , 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技的資料結構, 維 護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 是一種神乎其技的資料結構, 維護 一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...種神乎其技的資料結構, 維護一 堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...結構, 維護一堆 Key-\/$>$Value . 並 且支援 一些 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...構, 維護一堆 Key-\/$>$Value . 並且 支援 一些 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ..., 維護一堆 Key-\/$>$Value . 並且支 援 一些 {\ttfamily std\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... 維護一堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...護一堆 Key-\/$>$Value . 並且支援 一 些 {\ttfamily std\-::map}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:些 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...一堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:難 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...且支援 一些 {\ttfamily std\-::map} 難 以快速實踐的操作, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...支援 一些 {\ttfamily std\-::map} 難以 快速實踐的操作, 如... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...援 一些 {\ttfamily std\-::map} 難以快 速實踐的操作, 如 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:速 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... 一些 {\ttfamily std\-::map} 難以快速 實踐的操作, 如 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...些 {\ttfamily std\-::map} 難以快速實 踐的操作, 如 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:踐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ... {\ttfamily std\-::map} 難以快速實踐 的操作, 如 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...\ttfamily std\-::map} 難以快速實踐的 操作, 如 {\ttfamily spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...family std\-::map} 難以快速實踐的操 作, 如 {\ttfamily split}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ily std\-::map} 難以快速實踐的操作 , 如 {\ttfamily split} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...td\-::map} 難以快速實踐的操作, 如 {\ttfamily split} , {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 類 似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 類似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...}\small\item\em 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...tfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...mily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...y stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...tl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...ompactList}\small\item\em constructor, 複 製資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...actList}\small\item\em constructor, 複製 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...List}\small\item\em constructor, 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...t}\small\item\em constructor, 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將 資料都丟到 {\ttfamily tre... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將資 料都丟到 {\ttfamily tre... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...n{DoxyCompactList}\small\item\em 將資料 都丟到 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...oxyCompactList}\small\item\em 將資料都 丟到 {\ttfamily tree2} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...CompactList}\small\item\em 將資料都丟 到 {\ttfamily tree2} 身... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...pactList}\small\item\em 將資料都丟到 {\ttfamily tree2} 身上,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...m 將資料都丟到 {\ttfamily tree2} 身 上, 並且清空自己 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...資料都丟到 {\ttfamily tree2} 身上 , 並且清空自己 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...料都丟到 {\ttfamily tree2} 身上, 並 且清空自己 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...都丟到 {\ttfamily tree2} 身上, 並且 清空自己 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...丟到 {\ttfamily tree2} 身上, 並且清 空自己 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...到 {\ttfamily tree2} 身上, 並且清空 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ... {\ttfamily tree2} 身上, 並且清空自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...ttfamily tree2} 身上, 並且清空自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $<$= 它的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...小的) Element且 {\ttfamily k} $<$= 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...的) Element且 {\ttfamily k} $<$= 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...ment且 {\ttfamily k} $<$= 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...t且 {\ttfamily k} $<$= 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ... {\ttfamily k} $<$= 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...\ttfamily k} $<$= 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...family k} $<$= 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $<$ 它的 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...小的) Element且 {\ttfamily k} $<$ 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...的) Element且 {\ttfamily k} $<$ 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...ement且 {\ttfamily k} $<$ 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...nt且 {\ttfamily k} $<$ 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... {\ttfamily k} $<$ 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...{\ttfamily k} $<$ 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...tfamily k} $<$ 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $>$= 它的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...小的) Element且 {\ttfamily k} $>$= 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...的) Element且 {\ttfamily k} $>$= 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ment且 {\ttfamily k} $>$= 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...t且 {\ttfamily k} $>$= 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ... {\ttfamily k} $>$= 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...\ttfamily k} $>$= 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...family k} $>$= 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $>$ 它的 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...小的) Element且 {\ttfamily k} $>$ 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...的) Element且 {\ttfamily k} $>$ 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...ement且 {\ttfamily k} $>$ 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...nt且 {\ttfamily k} $>$ 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ... {\ttfamily k} $>$ 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...{\ttfamily k} $>$ 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...tfamily k} $>$ 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 找 出 Key= {\ttfamily k} 的\-El... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 找出 Key= {\ttfamily k} 的\-El... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...mall\item\em 找出 Key= {\ttfamily k} 的 \-Elemenet 並回傳. 找... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...出 Key= {\ttfamily k} 的\-Elemenet 並 回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ... Key= {\ttfamily k} 的\-Elemenet 並回 傳. 找不到的話回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...Key= {\ttfamily k} 的\-Elemenet 並回傳 . 找不到的話回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...{\ttfamily k} 的\-Elemenet 並回傳. 找 不到的話回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tfamily k} 的\-Elemenet 並回傳. 找不 到的話回傳 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...mily k} 的\-Elemenet 並回傳. 找不到 的話回傳 {\ttfamily th... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...y k} 的\-Elemenet 並回傳. 找不到的 話回傳 {\ttfamily this-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...} 的\-Elemenet 並回傳. 找不到的話 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\-Elemenet 並回傳. 找不到的話回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...-Elemenet 並回傳. 找不到的話回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 將 \-Elements依照\-Key由小到... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ompactList}\small\item\em 將\-Elements依 照\-Key由小到大排序... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...actList}\small\item\em 將\-Elements依照 \-Key由小到大排序, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...\small\item\em 將\-Elements依照\-Key由 小到大排序, 回傳第... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...all\item\em 將\-Elements依照\-Key由小 到大排序, 回傳第 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...\item\em 將\-Elements依照\-Key由小到 大排序, 回傳第 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...em\em 將\-Elements依照\-Key由小到大 排序, 回傳第 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...em 將\-Elements依照\-Key由小到大排 序, 回傳第 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...將\-Elements依照\-Key由小到大排序 , 回傳第 {\ttfamily ord... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...Elements依照\-Key由小到大排序, 回 傳第 {\ttfamily ord} 個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ments依照\-Key由小到大排序, 回傳 第 {\ttfamily ord} 個\-E... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ts依照\-Key由小到大排序, 回傳第 {\ttfamily ord} 個\-Elem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...大排序, 回傳第 {\ttfamily ord} 個 \-Element (由0算起). \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...傳第 {\ttfamily ord} 個\-Element (由 0算起). \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...第 {\ttfamily ord} 個\-Element (由0算 起). \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ... {\ttfamily ord} 個\-Element (由0算起 ). \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 回 傳\-Key最小的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 回傳 \-Key最小的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...yCompactList}\small\item\em 回傳\-Key最 小的\-Element, 如果\-S... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...mpactList}\small\item\em 回傳\-Key最小 的\-Element, 如果\-Spla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...ctList}\small\item\em 回傳\-Key最小的 \-Element, 如果\-Splay\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...item\em 回傳\-Key最小的\-Element, 如 果\-Splay\-Tree為空, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...m\em 回傳\-Key最小的\-Element, 如果 \-Splay\-Tree為空, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...最小的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...小的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...Element, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...ment, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 回 傳\-Key最大的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 回傳 \-Key最大的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...yCompactList}\small\item\em 回傳\-Key最 大的\-Element, 如果\-S... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...mpactList}\small\item\em 回傳\-Key最大 的\-Element, 如果\-Spla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ctList}\small\item\em 回傳\-Key最大的 \-Element, 如果\-Splay\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...item\em 回傳\-Key最大的\-Element, 如 果\-Splay\-Tree為空, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...m\em 回傳\-Key最大的\-Element, 如果 \-Splay\-Tree為空, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...最大的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...大的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...Element, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ment, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. [179] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 回 傳一個指向\-N\-U\-L\-L的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 回傳 一個指向\-N\-U\-L\-L的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...n{DoxyCompactList}\small\item\em 回傳一 個指向\-N\-U\-L\-L的\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...oxyCompactList}\small\item\em 回傳一個 指向\-N\-U\-L\-L的\-Ele... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...CompactList}\small\item\em 回傳一個指 向\-N\-U\-L\-L的\-Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...pactList}\small\item\em 回傳一個指向 \-N\-U\-L\-L的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...\item\em 回傳一個指向\-N\-U\-L\-L的 \-Element, \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 回 傳資料個數 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 回傳 資料個數 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...n{DoxyCompactList}\small\item\em 回傳資 料個數 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...oxyCompactList}\small\item\em 回傳資料 個數 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...CompactList}\small\item\em 回傳資料個 數 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...pactList}\small\item\em 回傳資料個數 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 回 傳是否為空 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 回傳 是否為空 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...n{DoxyCompactList}\small\item\em 回傳是 否為空 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...oxyCompactList}\small\item\em 回傳是否 為空 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...CompactList}\small\item\em 回傳是否為 空 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...pactList}\small\item\em 回傳是否為空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 清 空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 清空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:插 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 插 入一組{\ttfamily }(Key ---$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 插入 一組{\ttfamily }(Key ---$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...n{DoxyCompactList}\small\item\em 插入一 組{\ttfamily }(Key ---$>$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 ...oxyCompactList}\small\item\em 插入一組 {\ttfamily }(Key ---$>$ {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 刪 除一組資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 刪除 一組資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...n{DoxyCompactList}\small\item\em 刪除一 組資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...oxyCompactList}\small\item\em 刪除一組 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...CompactList}\small\item\em 刪除一組資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 ...pactList}\small\item\em 刪除一組資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 將 所有\-Element的\-Key同加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 將所 有\-Element的\-Key同加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...n{DoxyCompactList}\small\item\em 將所有 \-Element的\-Key同加上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...tList}\small\item\em 將所有\-Element的 \-Key同加上 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...mall\item\em 將所有\-Element的\-Key同 加上 {\ttfamily delta} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...l\item\em 將所有\-Element的\-Key同加 上 {\ttfamily delta} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...tem\em 將所有\-Element的\-Key同加上 {\ttfamily delta} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \begin{DoxyCompactList}\small\item\em 將 {\ttfamily tree2} 清空, 再... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...st}\small\item\em 將{\ttfamily tree2} 清 空, 再將所有\-Key $>$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...\small\item\em 將{\ttfamily tree2} 清空 , 再將所有\-Key $>$ {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:再 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...l\item\em 將{\ttfamily tree2} 清空, 再 將所有\-Key $>$ {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...tem\em 將{\ttfamily tree2} 清空, 再將 所有\-Key $>$ {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...\em 將{\ttfamily tree2} 清空, 再將所 有\-Key $>$ {\ttfamily up... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ... 將{\ttfamily tree2} 清空, 再將所有 \-Key $>$ {\ttfamily upper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...\-Key $>$ {\ttfamily upper\-\_\-bound} 的 \-Element都丟過去 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...ttfamily upper\-\_\-bound} 的\-Element都 丟過去 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...amily upper\-\_\-bound} 的\-Element都丟 過去 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...ly upper\-\_\-bound} 的\-Element都丟過 去 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:去 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...upper\-\_\-bound} 的\-Element都丟過去 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 \begin{DoxyCompactList}\small\item\em 合 併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 \begin{DoxyCompactList}\small\item\em 合併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \begin{DoxyCompactList}\small\item\em 合 併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \begin{DoxyCompactList}\small\item\em 合併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 \begin{DoxyCompactList}\small\item\em 就 像{\ttfamily stl\-::map\-::op... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 \begin{DoxyCompactList}\small\item\em 就像 {\ttfamily stl\-::map\-::op... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是 一種神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一 種神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種 神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:神 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神 乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乎 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎 其技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其 技的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:技 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技 的資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技的 資料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技的資 料結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技的資料 結構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技的資料結 構, 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技的資料結構 , 維護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技的資料結構, 維 護一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 是一種神乎其技的資料結構, 維護 一堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...種神乎其技的資料結構, 維護一 堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...結構, 維護一堆 Key-\/$>$Value . 並 且支援 一些 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...構, 維護一堆 Key-\/$>$Value . 並且 支援 一些 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ..., 維護一堆 Key-\/$>$Value . 並且支 援 一些 {\ttfamily std\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...維護一堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...一堆 Key-\/$>$Value . 並且支援 一 些 {\ttfamily std\-::map}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:些 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:難 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...支援 一些 {\ttfamily std\-::map} 難 以快速實踐的操作, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...援 一些 {\ttfamily std\-::map} 難以 快速實踐的操作, 如... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ... 一些 {\ttfamily std\-::map} 難以快 速實踐的操作, 如 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:速 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...一些 {\ttfamily std\-::map} 難以快速 實踐的操作, 如 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...些 {\ttfamily std\-::map} 難以快速實 踐的操作, 如 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:踐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ... {\ttfamily std\-::map} 難以快速實踐 的操作, 如 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...ttfamily std\-::map} 難以快速實踐的 操作, 如 {\ttfamily spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...amily std\-::map} 難以快速實踐的操 作, 如 {\ttfamily split}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...ly std\-::map} 難以快速實踐的操作 , 如 {\ttfamily split} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 ...d\-::map} 難以快速實踐的操作, 如 {\ttfamily split} , {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...ey {\ttfamily k}) &\PBS\centering Key &相 加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.83 ...{\ttfamily k}) &\PBS\centering Key &相加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...y {\ttfamily k}) &\PBS\centering bool &大 小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...\ttfamily k}) &\PBS\centering bool &大小 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...family k}) &\PBS\centering bool &大小比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...ily k}) &\PBS\centering bool &大小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ... &(int {\ttfamily n}) &\PBS\centering &構 子,{\ttfamily n} 永遠... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...int {\ttfamily n}) &\PBS\centering &構子 ,{\ttfamily n} 永遠是0 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:永 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ... &\PBS\centering &構子,{\ttfamily n} 永 遠是0 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:遠 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...PBS\centering &構子,{\ttfamily n} 永遠 是0 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...\centering &構子,{\ttfamily n} 永遠是 0 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:建 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...raggedleft Value &( ) &\PBS\centering &建 構子 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...gedleft Value &( ) &\PBS\centering &建構 子 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.87 ...left Value &( ) &\PBS\centering &建構子 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) in alignment at lines 80--88 [][][][][][] [] Underfull \hbox (badness 10000) detected at line 89 [][][] [] ! Package inputenc Error: Unicode char \u8:假 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 \-: -\/假 設現在有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 \-: -\/假設 現在有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:現 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 \-: -\/假設現 在有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 \-: -\/假設現在 有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 \-: -\/假設現在有 兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 \-: -\/假設現在有兩 個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 \-: -\/假設現在有兩個 \-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:和 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily B}, 則\-: -\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...-Tree {\ttfamily A} 和 {\ttfamily B}, 則 \-: -\/執行 {\ttfamily B... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:執 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...family A} 和 {\ttfamily B}, 則\-: -\/執 行 {\ttfamily B.\-move\-T... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...ily A} 和 {\ttfamily B}, 則\-: -\/執行 {\ttfamily B.\-move\-To(\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...執行 {\ttfamily B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會 變成空的, {\ttfamily A... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...-move\-To(\&\-A)} 後 {\ttfamily B} 會變 成空的, {\ttfamily A} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...ve\-To(\&\-A)} 後 {\ttfamily B} 會變成 空的, {\ttfamily A} 原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...-To(\&\-A)} 後 {\ttfamily B} 會變成空 的, {\ttfamily A} 原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...(\&\-A)} 後 {\ttfamily B} 會變成空的 , {\ttfamily A} 原本擁... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...mily B} 會變成空的, {\ttfamily A} 原 本擁有的資料也會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...y B} 會變成空的, {\ttfamily A} 原本 擁有的資料也會覆... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擁 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...} 會變成空的, {\ttfamily A} 原本擁 有的資料也會覆蓋... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...變成空的, {\ttfamily A} 原本擁有 的資料也會覆蓋掉 -... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...成空的, {\ttfamily A} 原本擁有的 資料也會覆蓋掉 -\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...空的, {\ttfamily A} 原本擁有的資 料也會覆蓋掉 -\/行 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...的, {\ttfamily A} 原本擁有的資料 也會覆蓋掉 -\/行 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:也 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ..., {\ttfamily A} 原本擁有的資料也 會覆蓋掉 -\/行 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ... {\ttfamily A} 原本擁有的資料也會 覆蓋掉 -\/行 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:覆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...ttfamily A} 原本擁有的資料也會覆 蓋掉 -\/行 {\ttfamily A... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:蓋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...amily A} 原本擁有的資料也會覆蓋 掉 -\/行 {\ttfamily A.\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:掉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...ly A} 原本擁有的資料也會覆蓋掉 -\/行 {\ttfamily A.\-mer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...本擁有的資料也會覆蓋掉 -\/行 {\ttfamily A.\-merge(\&\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ... -\/行 {\ttfamily A.\-merge(\&\-B)} 或 {\ttfamily A.\-merge\-Aft... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ... {\ttfamily A.\-merge\-After(\&\-B)} 後 如果檢查發現確實... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...\ttfamily A.\-merge\-After(\&\-B)} 後 如 果檢查發現確實可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...family A.\-merge\-After(\&\-B)} 後 如果 檢查發現確實可以me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...ily A.\-merge\-After(\&\-B)} 後 如果檢 查發現確實可以merge... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ... A.\-merge\-After(\&\-B)} 後 如果檢查 發現確實可以merge, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:發 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...\-merge\-After(\&\-B)} 後 如果檢查發 現確實可以merge, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:現 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...erge\-After(\&\-B)} 後 如果檢查發現 確實可以merge, 則之... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:確 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...e\-After(\&\-B)} 後 如果檢查發現確 實可以merge, 則之後 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...After(\&\-B)} 後 如果檢查發現確實 可以merge, 則之後 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...er(\&\-B)} 後 如果檢查發現確實可 以merge, 則之後 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...\&\-B)} 後 如果檢查發現確實可以 merge, 則之後 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ... 如果檢查發現確實可以merge, 則 之後 {\ttfamily B} 會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...果檢查發現確實可以merge, 則之 後 {\ttfamily B} 會變... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...檢查發現確實可以merge, 則之後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...可以merge, 則之後 {\ttfamily B} 會 變成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...以merge, 則之後 {\ttfamily B} 會變 成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...merge, 則之後 {\ttfamily B} 會變成 空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...erge, 則之後 {\ttfamily B} 會變成空 的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 ...e, 則之後 {\ttfamily B} 會變成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 92 [][][] [] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.126 constructor, 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. [180] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 138. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 138. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 138. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 清 空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 清空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.174 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回 傳是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳 是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳是 否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳是否 為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳是否為 空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.189 回傳是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.204 回 傳一個指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.204 回傳 一個指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.204 回傳一 個指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.204 回傳一個 指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.204 回傳一個指 向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.204 回傳一個指向 \-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.204 回傳一個指向\-N\-U\-L\-L的 \-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 以 供 {\ttfamily find} ,{\ttfamily order} ,{\ttfamily first} ,{\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:供 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 以供 {\ttfamily find} ,{\ttfamily order} ,{\ttfamily first} ,{\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ... ,{\ttfamily first} ,{\ttfamily last} 等 判斷是否有找到相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:判 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...\ttfamily first} ,{\ttfamily last} 等判 斷是否有找到相對... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斷 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...family first} ,{\ttfamily last} 等判斷 是否有找到相對應... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...ily first} ,{\ttfamily last} 等判斷是 否有找到相對應的\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ... first} ,{\ttfamily last} 等判斷是否 有找到相對應的\-Ele... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...rst} ,{\ttfamily last} 等判斷是否有 找到相對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...} ,{\ttfamily last} 等判斷是否有找 到相對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...{\ttfamily last} 等判斷是否有找到 相對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...tfamily last} 等判斷是否有找到相 對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...mily last} 等判斷是否有找到相對 應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...y last} 等判斷是否有找到相對應 的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 ...ast} 等判斷是否有找到相對應的 \-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪 除一組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪除 一組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪除一 組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪除一組 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪除一組資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.219 刪除一組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢 查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢查 是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢查是 否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢查是否 已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢查是否已 有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢查是否已有 \-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢查是否已有\-Element的 \-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...-Element的\-Key 為 {\ttfamily key}, 若 有則刪除之, 並回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...ement的\-Key 為 {\ttfamily key}, 若有 則刪除之, 並回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...nt的\-Key 為 {\ttfamily key}, 若有則 刪除之, 並回傳 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...\-Key 為 {\ttfamily key}, 若有則刪 除之, 並回傳 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...-Key 為 {\ttfamily key}, 若有則刪除 之, 並回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...y 為 {\ttfamily key}, 若有則刪除之 , 並回傳 {\ttfamily tru... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ... {\ttfamily key}, 若有則刪除之, 並 回傳 {\ttfamily true}, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...ttfamily key}, 若有則刪除之, 並回 傳 {\ttfamily true}, 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...amily key}, 若有則刪除之, 並回傳 {\ttfamily true}, 否則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...除之, 並回傳 {\ttfamily true}, 否 則則回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...之, 並回傳 {\ttfamily true}, 否則 則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ..., 並回傳 {\ttfamily true}, 否則則 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ... 並回傳 {\ttfamily true}, 否則則回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.221 ...回傳 {\ttfamily true}, 否則則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 找 出 Key= {\ttfamily k} 的\-Elemenet 並回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 找出 Key= {\ttfamily k} 的\-Elemenet 並回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 找出 Key= {\ttfamily k} 的 \-Elemenet 並回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 找出 Key= {\ttfamily k} 的\-Elemenet 並 回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ... Key= {\ttfamily k} 的\-Elemenet 並回 傳. 找不到的話回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...ey= {\ttfamily k} 的\-Elemenet 並回傳 . 找不到的話回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...\ttfamily k} 的\-Elemenet 並回傳. 找 不到的話回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...family k} 的\-Elemenet 並回傳. 找不 到的話回傳 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...ily k} 的\-Elemenet 並回傳. 找不到 的話回傳 {\ttfamily th... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ... k} 的\-Elemenet 並回傳. 找不到的 話回傳 {\ttfamily this-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ... 的\-Elemenet 並回傳. 找不到的話 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...\-Elemenet 並回傳. 找不到的話回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.234 ...Elemenet 並回傳. 找不到的話回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 回 傳\-Key最小的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 回傳 \-Key最小的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 回傳\-Key最 小的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 回傳\-Key最小 的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 回傳\-Key最小的 \-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 回傳\-Key最小的\-Element, 如 果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 回傳\-Key最小的\-Element, 如果 \-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 ...小的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 ...的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 ...lement, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.249 ...ent, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:插 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.265 插 入一組{\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.265 插入 一組{\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.265 插入一 組{\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.265 插入一組 {\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢 查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢查 是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢查是 否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢查是否 已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢查是否已 有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢查是否已有 \-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢查是否已有\-Element的 \-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...-Element的\-Key 為 {\ttfamily key}, 若 有則回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...ement的\-Key 為 {\ttfamily key}, 若有 則回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...nt的\-Key 為 {\ttfamily key}, 若有則 回傳 {\ttfamily false} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...\-Key 為 {\ttfamily key}, 若有則回 傳 {\ttfamily false} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...-Key 為 {\ttfamily key}, 若有則回傳 {\ttfamily false} , 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ..., 若有則回傳 {\ttfamily false} , 否 則將 一個 (Key -\/$>$ ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...有則回傳 {\ttfamily false} , 否則 將 一個 (Key -\/$>$ Val... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...則回傳 {\ttfamily false} , 否則將 一個 (Key -\/$>$ Value)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...回傳 {\ttfamily false} , 否則將 一 個 (Key -\/$>$ Value) = (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...傳 {\ttfamily false} , 否則將 一個 (Key -\/$>$ Value) = ({\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...tfamily key} -\/$>$ {\ttfamily value})的 \-Element加入, 並回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ... -\/$>$ {\ttfamily value})的\-Element加 入, 並回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 .../$>$ {\ttfamily value})的\-Element加入 , 並回傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...{\ttfamily value})的\-Element加入, 並 回傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...tfamily value})的\-Element加入, 並回 傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...mily value})的\-Element加入, 並回傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. [181] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 將 所有\-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 將所 有\-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 將所有 \-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 將所有\-Element的 \-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 將所有\-Element的\-Key同 加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 將所有\-Element的\-Key同加 上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.280 將所有\-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 回 傳\-Key最大的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 回傳 \-Key最大的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 回傳\-Key最 大的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 回傳\-Key最大 的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 回傳\-Key最大的 \-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 回傳\-Key最大的\-Element, 如 果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 回傳\-Key最大的\-Element, 如果 \-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 ...大的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 ...的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 ...lement, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.295 ...ent, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找 出第一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出 第一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出第 一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出第一 個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出第一個 (最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出第一個(最 小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出第一個(最小 的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出第一個(最小的 ) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 找出第一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 ...小的) Element且 {\ttfamily k} $<$= 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 ...的) Element且 {\ttfamily k} $<$= 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 ...ent且 {\ttfamily k} $<$= 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 ...且 {\ttfamily k} $<$= 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 ... {\ttfamily k} $<$= 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 ...ttfamily k} $<$= 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.310 ...amily k} $<$= 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.312 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.312 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.312 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.312 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.312 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.312 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.312 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 合 併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 合併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢 查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查 是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是 否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否 自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否自 己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否自己 中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否自己中 的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否自己中的 Key 都 小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否自己中的 Key 都小 於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...的 Key 都小於 {\ttfamily tree2} 中 的\-Key, 或是完全相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ... Key 都小於 {\ttfamily tree2} 中的 \-Key, 或是完全相反,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...小於 {\ttfamily tree2} 中的\-Key, 或 是完全相反, 是的話... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...於 {\ttfamily tree2} 中的\-Key, 或是 完全相反, 是的話把... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ... {\ttfamily tree2} 中的\-Key, 或是完 全相反, 是的話把 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...ttfamily tree2} 中的\-Key, 或是完全 相反, 是的話把 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...amily tree2} 中的\-Key, 或是完全相 反, 是的話把 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:反 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...ly tree2} 中的\-Key, 或是完全相反 , 是的話把 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...ee2} 中的\-Key, 或是完全相反, 是 的話把 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...} 中的\-Key, 或是完全相反, 是的 話把 {\ttfamily tree2`... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...的\-Key, 或是完全相反, 是的話 把 {\ttfamily tree2`中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...\-Key, 或是完全相反, 是的話把 {\ttfamily tree2`中的} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...相反, 是的話把 {\ttfamily tree2`中 的} \hyperlink{classmeow_... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...反, 是的話把 {\ttfamily tree2`中的 } \hyperlink{classmeow_1_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...eow_1_1SplayTree_1_1Element}{Element} 都 搬到自己這, 同時清... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:搬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ..._1_1SplayTree_1_1Element}{Element} 都搬 到自己這, 同時清空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...1SplayTree_1_1Element}{Element} 都搬到 自己這, 同時清空 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...layTree_1_1Element}{Element} 都搬到自 己這, 同時清空 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...Tree_1_1Element}{Element} 都搬到自己 這, 同時清空 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...e_1_1Element}{Element} 都搬到自己這 , 同時清空 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...Element}{Element} 都搬到自己這, 同 時清空 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...ment}{Element} 都搬到自己這, 同時 清空 {\ttfamily tree2} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...t}{Element} 都搬到自己這, 同時清 空 {\ttfamily tree2} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...Element} 都搬到自己這, 同時清空 {\ttfamily tree2} , 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...這, 同時清空 {\ttfamily tree2} , 否 則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ..., 同時清空 {\ttfamily tree2} , 否則 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...時清空 {\ttfamily tree2} , 否則回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.327 ...清空 {\ttfamily tree2} , 否則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 合 併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.340 合併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢 查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查 是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是 否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否 自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否自 己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否自己 中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否自己中 的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否自己中的 Key 都 小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否自己中的 Key 都小 於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...的 Key 都小於 {\ttfamily tree2} 中 的\-Key, 是的話把 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ... Key 都小於 {\ttfamily tree2} 中的 \-Key, 是的話把 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...小於 {\ttfamily tree2} 中的\-Key, 是 的話把 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...於 {\ttfamily tree2} 中的\-Key, 是的 話把 {\ttfamily tree2`} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ... {\ttfamily tree2} 中的\-Key, 是的話 把 {\ttfamily tree2`} 中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...ttfamily tree2} 中的\-Key, 是的話把 {\ttfamily tree2`} 中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...-Key, 是的話把 {\ttfamily tree2`} 中 的 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...y, 是的話把 {\ttfamily tree2`} 中的 \hyperlink{classmeow_1_1S... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...eow_1_1SplayTree_1_1Element}{Element} 都 搬到自己這, 同時清... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:搬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ..._1_1SplayTree_1_1Element}{Element} 都搬 到自己這, 同時清空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...1SplayTree_1_1Element}{Element} 都搬到 自己這, 同時清空 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...layTree_1_1Element}{Element} 都搬到自 己這, 同時清空 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...Tree_1_1Element}{Element} 都搬到自己 這, 同時清空 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...e_1_1Element}{Element} 都搬到自己這 , 同時清空 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...Element}{Element} 都搬到自己這, 同 時清空 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...ment}{Element} 都搬到自己這, 同時 清空 {\ttfamily tree2} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...t}{Element} 都搬到自己這, 同時清 空 {\ttfamily tree2} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...Element} 都搬到自己這, 同時清空 {\ttfamily tree2} , 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...這, 同時清空 {\ttfamily tree2} , 否 則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ..., 同時清空 {\ttfamily tree2} , 否則 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...時清空 {\ttfamily tree2} , 否則回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.342 ...清空 {\ttfamily tree2} , 否則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將 資料都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將資 料都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將資料 都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將資料都 丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將資料都丟 到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將資料都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將資料都丟到 {\ttfamily tree2} 身 上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 將資料都丟到 {\ttfamily tree2} 身上 , 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...都丟到 {\ttfamily tree2} 身上, 並 且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...丟到 {\ttfamily tree2} 身上, 並且 清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...到 {\ttfamily tree2} 身上, 並且清 空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ... {\ttfamily tree2} 身上, 並且清空 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...{\ttfamily tree2} 身上, 並且清空自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.355 ...tfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.385 就 像{\ttfamily stl\-::map\-::operator}\mbox{[}\mbox{]} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.385 就像 {\ttfamily stl\-::map\-::operator}\mbox{[}\mbox{]} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會 先檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:先 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先 檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先檢 查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先檢查 是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先檢查是 否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先檢查是否 已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先檢查是否已 有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先檢查是否已有 \-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 會先檢查是否已有\-Element的 \-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...-Element的\-Key 為 {\ttfamily key}, 若 有則回傳相對應的\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...ement的\-Key 為 {\ttfamily key}, 若有 則回傳相對應的\-Val... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...nt的\-Key 為 {\ttfamily key}, 若有則 回傳相對應的\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...\-Key 為 {\ttfamily key}, 若有則回 傳相對應的\-Value的\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...-Key 為 {\ttfamily key}, 若有則回傳 相對應的\-Value的\-Re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...y 為 {\ttfamily key}, 若有則回傳相 對應的\-Value的\-Refer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ... {\ttfamily key}, 若有則回傳相對 應的\-Value的\-Referenc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...{\ttfamily key}, 若有則回傳相對應 的\-Value的\-Reference ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...tfamily key}, 若有則回傳相對應的 \-Value的\-Reference 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...y}, 若有則回傳相對應的\-Value的 \-Reference 否則先執... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...傳相對應的\-Value的\-Reference 否 則先執行 {\ttfamily in... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...相對應的\-Value的\-Reference 否則 先執行 {\ttfamily inser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:先 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...對應的\-Value的\-Reference 否則先 執行 {\ttfamily insert(k... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:執 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...應的\-Value的\-Reference 否則先執 行 {\ttfamily insert(key,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...的\-Value的\-Reference 否則先執行 {\ttfamily insert(key,\-V... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:再 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...行 {\ttfamily insert(key,\-Value())} 再 回傳相對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ... {\ttfamily insert(key,\-Value())} 再回 傳相對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...ttfamily insert(key,\-Value())} 再回傳 相對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...amily insert(key,\-Value())} 再回傳相 對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...ly insert(key,\-Value())} 再回傳相對 應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...insert(key,\-Value())} 再回傳相對應 的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.387 ...ert(key,\-Value())} 再回傳相對應的 \-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將 \-Elements依照\-Key由小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依 照\-Key由小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依照 \-Key由小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依照\-Key由 小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依照\-Key由小 到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依照\-Key由小到 大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依照\-Key由小到大 排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依照\-Key由小到大排 序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 將\-Elements依照\-Key由小到大排序 , 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ...lements依照\-Key由小到大排序, 回 傳第 {\ttfamily ord} 個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ...ents依照\-Key由小到大排序, 回傳 第 {\ttfamily ord} 個\-E... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ...s依照\-Key由小到大排序, 回傳第 {\ttfamily ord} 個\-Elem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ...大排序, 回傳第 {\ttfamily ord} 個 \-Element (由0算起). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ...傳第 {\ttfamily ord} 個\-Element (由 0算起). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ...第 {\ttfamily ord} 個\-Element (由0算 起). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.400 ... {\ttfamily ord} 個\-Element (由0算起 ). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 其 中如果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 其中 如果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 其中如 果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 其中如果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 其中如果 {\ttfamily ord$>$N-\/1}, 則 會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 其中如果 {\ttfamily ord$>$N-\/1}, 則會 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 ...如果 {\ttfamily ord$>$N-\/1}, 則會回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.402 ...果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. [182] ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找 出第一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出 第一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出第 一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出第一 個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出第一個 (最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出第一個(最 小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出第一個(最小 的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出第一個(最小的 ) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 找出第一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ...小的) Element且 {\ttfamily k} $>$= 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ...的) Element且 {\ttfamily k} $>$= 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ...ent且 {\ttfamily k} $>$= 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ...且 {\ttfamily k} $>$= 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ... {\ttfamily k} $>$= 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ...ttfamily k} $>$= 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.415 ...amily k} $>$= 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.417 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.417 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.417 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.417 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.417 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.417 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.417 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找 出第一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出 第一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出第 一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出第一 個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出第一個 (最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出第一個(最 小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出第一個(最小 的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出第一個(最小的 ) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 找出第一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 ...小的) Element且 {\ttfamily k} $>$ 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 ...的) Element且 {\ttfamily k} $>$ 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 ...ment且 {\ttfamily k} $>$ 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 ...t且 {\ttfamily k} $>$ 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 ... {\ttfamily k} $>$ 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 ...\ttfamily k} $>$ 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.430 ...family k} $>$ 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.432 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 回 傳資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 回傳 資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 回傳資 料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 回傳資料 個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 回傳資料個 數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.445 回傳資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 將 {\ttfamily tree2} 清空, 再將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 將{\ttfamily tree2} 清 空, 再將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 將{\ttfamily tree2} 清空 , 再將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:再 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 將{\ttfamily tree2} 清空, 再 將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 將{\ttfamily tree2} 清空, 再將 所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 將{\ttfamily tree2} 清空, 再將所 有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 將{\ttfamily tree2} 清空, 再將所有 \-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 ...-Key $>$ {\ttfamily upper\-\_\-bound} 的 \-Element都丟過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 ...tfamily upper\-\_\-bound} 的\-Element都 丟過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 ...mily upper\-\_\-bound} 的\-Element都丟 過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 ...y upper\-\_\-bound} 的\-Element都丟過 去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:去 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.461 ...pper\-\_\-bound} 的\-Element都丟過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找 出第一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出 第一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出第 一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出第一 個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出第一個 (最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出第一個(最 小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出第一個(最小 的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出第一個(最小的 ) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 找出第一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 ...小的) Element且 {\ttfamily k} $<$ 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 ...的) Element且 {\ttfamily k} $<$ 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 ...ment且 {\ttfamily k} $<$ 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 ...t且 {\ttfamily k} $<$ 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 ... {\ttfamily k} $<$ 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 ...\ttfamily k} $<$ 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.476 ...family k} $<$ 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.478 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1SplayTree__Range.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:基 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基 本上跟\-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本 上跟\-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上 跟\-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上跟 \-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上跟\-Splay\-Tree一 樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上跟\-Splay\-Tree一樣 , 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上跟\-Splay\-Tree一樣, 不 過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上跟\-Splay\-Tree一樣, 不過 這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上跟\-Splay\-Tree一樣, 不過這 邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 基本上跟\-Splay\-Tree一樣, 不過這邊 結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...上跟\-Splay\-Tree一樣, 不過這邊結 合線段樹, 多了區間... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...跟\-Splay\-Tree一樣, 不過這邊結合 線段樹, 多了區間操... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...\-Splay\-Tree一樣, 不過這邊結合線 段樹, 多了區間操作... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...Splay\-Tree一樣, 不過這邊結合線段 樹, 多了區間操作 (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ay\-Tree一樣, 不過這邊結合線段樹 , 多了區間操作 (線... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ree一樣, 不過這邊結合線段樹, 多 了區間操作 (線段樹... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...一樣, 不過這邊結合線段樹, 多了 區間操作 (線段樹相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...樣, 不過這邊結合線段樹, 多了區 間操作 (線段樹相關... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ..., 不過這邊結合線段樹, 多了區間 操作 (線段樹相關ope... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...過這邊結合線段樹, 多了區間操 作 (線段樹相關operat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...這邊結合線段樹, 多了區間操作 (線段樹相關operator... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...邊結合線段樹, 多了區間操作 (線 段樹相關operator定義... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...結合線段樹, 多了區間操作 (線段 樹相關operator定義請... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...合線段樹, 多了區間操作 (線段樹 相關operator定義請見... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...線段樹, 多了區間操作 (線段樹相 關operator定義請見 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:關 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...段樹, 多了區間操作 (線段樹相關 operator定義請見 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...了區間操作 (線段樹相關operator定 義請見 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...區間操作 (線段樹相關operator定義 請見 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:請 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...間操作 (線段樹相關operator定義請 見 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:見 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...操作 (線段樹相關operator定義請見 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 類 似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 類似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...}\small\item\em 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...tfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...mily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...y stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...tl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...ompactList}\small\item\em constructor, 複 製資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...actList}\small\item\em constructor, 複製 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...List}\small\item\em constructor, 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...t}\small\item\em constructor, 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [183] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將 資料都丟到 {\ttfamily tre... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將資 料都丟到 {\ttfamily tre... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...n{DoxyCompactList}\small\item\em 將資料 都丟到 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...oxyCompactList}\small\item\em 將資料都 丟到 {\ttfamily tree2} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...CompactList}\small\item\em 將資料都丟 到 {\ttfamily tree2} 身... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...pactList}\small\item\em 將資料都丟到 {\ttfamily tree2} 身上,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...m 將資料都丟到 {\ttfamily tree2} 身 上, 並且清空自己 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...資料都丟到 {\ttfamily tree2} 身上 , 並且清空自己 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...料都丟到 {\ttfamily tree2} 身上, 並 且清空自己 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...都丟到 {\ttfamily tree2} 身上, 並且 清空自己 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...丟到 {\ttfamily tree2} 身上, 並且清 空自己 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...到 {\ttfamily tree2} 身上, 並且清空 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ... {\ttfamily tree2} 身上, 並且清空自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...ttfamily tree2} 身上, 並且清空自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $<$= 它的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...小的) Element且 {\ttfamily k} $<$= 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...的) Element且 {\ttfamily k} $<$= 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...ment且 {\ttfamily k} $<$= 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...t且 {\ttfamily k} $<$= 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ... {\ttfamily k} $<$= 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...\ttfamily k} $<$= 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...family k} $<$= 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $<$ 它的 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...小的) Element且 {\ttfamily k} $<$ 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...的) Element且 {\ttfamily k} $<$ 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...ement且 {\ttfamily k} $<$ 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...nt且 {\ttfamily k} $<$ 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ... {\ttfamily k} $<$ 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...{\ttfamily k} $<$ 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...tfamily k} $<$ 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $>$= 它的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...小的) Element且 {\ttfamily k} $>$= 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...的) Element且 {\ttfamily k} $>$= 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...ment且 {\ttfamily k} $>$= 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...t且 {\ttfamily k} $>$= 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ... {\ttfamily k} $>$= 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...\ttfamily k} $>$= 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...family k} $>$= 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 找 出第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 找出 第一個(最小的) Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...n{DoxyCompactList}\small\item\em 找出第 一個(最小的) Element... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...oxyCompactList}\small\item\em 找出第一 個(最小的) Element且 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...CompactList}\small\item\em 找出第一個 (最小的) Element且 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...actList}\small\item\em 找出第一個(最 小的) Element且 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...List}\small\item\em 找出第一個(最小 的) Element且 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...t}\small\item\em 找出第一個(最小的 ) Element且 {\ttfamily k}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...m\em 找出第一個(最小的) Element且 {\ttfamily k} $>$ 它的 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...小的) Element且 {\ttfamily k} $>$ 它 的 Key, 並且回傳之. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...的) Element且 {\ttfamily k} $>$ 它的 Key, 並且回傳之. \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...ement且 {\ttfamily k} $>$ 它的 Key, 並 且回傳之. \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...nt且 {\ttfamily k} $>$ 它的 Key, 並且 回傳之. \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ... {\ttfamily k} $>$ 它的 Key, 並且回 傳之. \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...{\ttfamily k} $>$ 它的 Key, 並且回傳 之. \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...tfamily k} $>$ 它的 Key, 並且回傳之 . \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 找 出 Key= {\ttfamily k} 的\-El... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 找出 Key= {\ttfamily k} 的\-El... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...mall\item\em 找出 Key= {\ttfamily k} 的 \-Elemenet 並回傳. 找... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...出 Key= {\ttfamily k} 的\-Elemenet 並 回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ... Key= {\ttfamily k} 的\-Elemenet 並回 傳. 找不到的話回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...Key= {\ttfamily k} 的\-Elemenet 並回傳 . 找不到的話回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...{\ttfamily k} 的\-Elemenet 並回傳. 找 不到的話回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tfamily k} 的\-Elemenet 並回傳. 找不 到的話回傳 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...mily k} 的\-Elemenet 並回傳. 找不到 的話回傳 {\ttfamily th... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...y k} 的\-Elemenet 並回傳. 找不到的 話回傳 {\ttfamily this-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...} 的\-Elemenet 並回傳. 找不到的話 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\-Elemenet 並回傳. 找不到的話回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...-Elemenet 並回傳. 找不到的話回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 將 \-Elements依照\-Key由小到... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ompactList}\small\item\em 將\-Elements依 照\-Key由小到大排序... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...actList}\small\item\em 將\-Elements依照 \-Key由小到大排序, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...\small\item\em 將\-Elements依照\-Key由 小到大排序, 回傳第... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...all\item\em 將\-Elements依照\-Key由小 到大排序, 回傳第 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...\item\em 將\-Elements依照\-Key由小到 大排序, 回傳第 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...em\em 將\-Elements依照\-Key由小到大 排序, 回傳第 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...em 將\-Elements依照\-Key由小到大排 序, 回傳第 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...將\-Elements依照\-Key由小到大排序 , 回傳第 {\ttfamily ord... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...Elements依照\-Key由小到大排序, 回 傳第 {\ttfamily ord} 個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ments依照\-Key由小到大排序, 回傳 第 {\ttfamily ord} 個\-E... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...ts依照\-Key由小到大排序, 回傳第 {\ttfamily ord} 個\-Elem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...大排序, 回傳第 {\ttfamily ord} 個 \-Element (由0算起). \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...傳第 {\ttfamily ord} 個\-Element (由 0算起). \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...第 {\ttfamily ord} 個\-Element (由0算 起). \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ... {\ttfamily ord} 個\-Element (由0算起 ). \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 回 傳\-Key最小的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 回傳 \-Key最小的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...yCompactList}\small\item\em 回傳\-Key最 小的\-Element, 如果\-S... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...mpactList}\small\item\em 回傳\-Key最小 的\-Element, 如果\-Spla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...ctList}\small\item\em 回傳\-Key最小的 \-Element, 如果\-Splay\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...item\em 回傳\-Key最小的\-Element, 如 果\-Splay\-Tree為空, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...m\em 回傳\-Key最小的\-Element, 如果 \-Splay\-Tree為空, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...最小的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...小的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...Element, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...ment, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 回 傳\-Key最大的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 回傳 \-Key最大的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...yCompactList}\small\item\em 回傳\-Key最 大的\-Element, 如果\-S... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...mpactList}\small\item\em 回傳\-Key最大 的\-Element, 如果\-Spla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ctList}\small\item\em 回傳\-Key最大的 \-Element, 如果\-Splay\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...item\em 回傳\-Key最大的\-Element, 如 果\-Splay\-Tree為空, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...m\em 回傳\-Key最大的\-Element, 如果 \-Splay\-Tree為空, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...最大的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...大的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...Element, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ment, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 回 傳一個指向\-N\-U\-L\-L的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 \begin{DoxyCompactList}\small\item\em 回傳 一個指向\-N\-U\-L\-L的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...n{DoxyCompactList}\small\item\em 回傳一 個指向\-N\-U\-L\-L的\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...oxyCompactList}\small\item\em 回傳一個 指向\-N\-U\-L\-L的\-Ele... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...CompactList}\small\item\em 回傳一個指 向\-N\-U\-L\-L的\-Elemen... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...pactList}\small\item\em 回傳一個指向 \-N\-U\-L\-L的\-Element, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.48 ...\item\em 回傳一個指向\-N\-U\-L\-L的 \-Element, \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 回 傳資料個數 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 \begin{DoxyCompactList}\small\item\em 回傳 資料個數 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...n{DoxyCompactList}\small\item\em 回傳資 料個數 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...oxyCompactList}\small\item\em 回傳資料 個數 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...CompactList}\small\item\em 回傳資料個 數 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.50 ...pactList}\small\item\em 回傳資料個數 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 回 傳是否為空 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 \begin{DoxyCompactList}\small\item\em 回傳 是否為空 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...n{DoxyCompactList}\small\item\em 回傳是 否為空 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...oxyCompactList}\small\item\em 回傳是否 為空 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...CompactList}\small\item\em 回傳是否為 空 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 ...pactList}\small\item\em 回傳是否為空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 查 找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 \begin{DoxyCompactList}\small\item\em 查找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 查 找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 \begin{DoxyCompactList}\small\item\em 查找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 清 空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 \begin{DoxyCompactList}\small\item\em 清空 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:插 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 插 入一組{\ttfamily }(Key ---$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \begin{DoxyCompactList}\small\item\em 插入 一組{\ttfamily }(Key ---$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...n{DoxyCompactList}\small\item\em 插入一 組{\ttfamily }(Key ---$>$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...oxyCompactList}\small\item\em 插入一組 {\ttfamily }(Key ---$>$ {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \begin{DoxyCompactList}\small\item\em 刪 除一組資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \begin{DoxyCompactList}\small\item\em 刪除 一組資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...n{DoxyCompactList}\small\item\em 刪除一 組資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...oxyCompactList}\small\item\em 刪除一組 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...CompactList}\small\item\em 刪除一組資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 ...pactList}\small\item\em 刪除一組資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 \begin{DoxyCompactList}\small\item\em 將 所有\-Element的\-Key同加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 \begin{DoxyCompactList}\small\item\em 將所 有\-Element的\-Key同加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...n{DoxyCompactList}\small\item\em 將所有 \-Element的\-Key同加上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tList}\small\item\em 將所有\-Element的 \-Key同加上 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...mall\item\em 將所有\-Element的\-Key同 加上 {\ttfamily delta} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...l\item\em 將所有\-Element的\-Key同加 上 {\ttfamily delta} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.64 ...tem\em 將所有\-Element的\-Key同加上 {\ttfamily delta} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \begin{DoxyCompactList}\small\item\em 將 所有\-Element的\-Value同... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 \begin{DoxyCompactList}\small\item\em 將所 有\-Element的\-Value同... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 ...n{DoxyCompactList}\small\item\em 將所有 \-Element的\-Value同加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 ...tList}\small\item\em 將所有\-Element的 \-Value同加上 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 ...ll\item\em 將所有\-Element的\-Value同 加上 {\ttfamily delta} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 ...item\em 將所有\-Element的\-Value同加 上 {\ttfamily delta} \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.66 ...m\em 將所有\-Element的\-Value同加上 {\ttfamily delta} \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 \begin{DoxyCompactList}\small\item\em 將 所有\-Element的\-Value全... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 \begin{DoxyCompactList}\small\item\em 將所 有\-Element的\-Value全... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...n{DoxyCompactList}\small\item\em 將所有 \-Element的\-Value全部... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...tList}\small\item\em 將所有\-Element的 \-Value全部設定成{\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...ll\item\em 將所有\-Element的\-Value全 部設定成{\ttfamily val... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...item\em 將所有\-Element的\-Value全部 設定成{\ttfamily value}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...m\em 將所有\-Element的\-Value全部設 定成{\ttfamily value} \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...m 將所有\-Element的\-Value全部設定 成{\ttfamily value} \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.68 ...所有\-Element的\-Value全部設定成 {\ttfamily value} \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 \begin{DoxyCompactList}\small\item\em 將 {\ttfamily tree2} 清空, 再... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...st}\small\item\em 將{\ttfamily tree2} 清 空, 再將所有\-Key $>$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...\small\item\em 將{\ttfamily tree2} 清空 , 再將所有\-Key $>$ {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:再 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...l\item\em 將{\ttfamily tree2} 清空, 再 將所有\-Key $>$ {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...tem\em 將{\ttfamily tree2} 清空, 再將 所有\-Key $>$ {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...\em 將{\ttfamily tree2} 清空, 再將所 有\-Key $>$ {\ttfamily up... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ... 將{\ttfamily tree2} 清空, 再將所有 \-Key $>$ {\ttfamily upper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...\-Key $>$ {\ttfamily upper\-\_\-bound} 的 \-Element都丟過去 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...ttfamily upper\-\_\-bound} 的\-Element都 丟過去 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...amily upper\-\_\-bound} 的\-Element都丟 過去 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...ly upper\-\_\-bound} 的\-Element都丟過 去 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:去 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...upper\-\_\-bound} 的\-Element都丟過去 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \begin{DoxyCompactList}\small\item\em 合 併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 \begin{DoxyCompactList}\small\item\em 合併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.74 \begin{DoxyCompactList}\small\item\em 合 併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.74 \begin{DoxyCompactList}\small\item\em 合併 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \begin{DoxyCompactList}\small\item\em 就 像{\ttfamily stl\-::map\-::op... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.76 \begin{DoxyCompactList}\small\item\em 就像 {\ttfamily stl\-::map\-::op... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:基 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基 本上跟\-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本 上跟\-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上 跟\-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上跟 \-Splay\-Tree一樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上跟\-Splay\-Tree一 樣, 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上跟\-Splay\-Tree一樣 , 不過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上跟\-Splay\-Tree一樣, 不 過這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上跟\-Splay\-Tree一樣, 不過 這邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上跟\-Splay\-Tree一樣, 不過這 邊結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 基本上跟\-Splay\-Tree一樣, 不過這邊 結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...上跟\-Splay\-Tree一樣, 不過這邊結 合線段樹, 多了區間... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...跟\-Splay\-Tree一樣, 不過這邊結合 線段樹, 多了區間操... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...\-Splay\-Tree一樣, 不過這邊結合線 段樹, 多了區間操作... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...play\-Tree一樣, 不過這邊結合線段 樹, 多了區間操作 (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...y\-Tree一樣, 不過這邊結合線段樹 , 多了區間操作 (線... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...ee一樣, 不過這邊結合線段樹, 多 了區間操作 (線段樹... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...樣, 不過這邊結合線段樹, 多了 區間操作 (線段樹相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ..., 不過這邊結合線段樹, 多了區 間操作 (線段樹相關... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ... 不過這邊結合線段樹, 多了區間 操作 (線段樹相關ope... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...過這邊結合線段樹, 多了區間操 作 (線段樹相關operat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...這邊結合線段樹, 多了區間操作 (線段樹相關operator... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...結合線段樹, 多了區間操作 (線 段樹相關operator定義... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...合線段樹, 多了區間操作 (線段 樹相關operator定義請... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...線段樹, 多了區間操作 (線段樹 相關operator定義請見... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...段樹, 多了區間操作 (線段樹相 關operator定義請見 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:關 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...樹, 多了區間操作 (線段樹相關 operator定義請見 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...區間操作 (線段樹相關operator定 義請見 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...間操作 (線段樹相關operator定義 請見 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:請 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...操作 (線段樹相關operator定義請 見 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:見 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.84 ...作 (線段樹相關operator定義請見 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. [184] ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 ...ey {\ttfamily k}) &\PBS\centering Key &相 加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.91 ...{\ttfamily k}) &\PBS\centering Key &相加 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.92 ...y {\ttfamily k}) &\PBS\centering bool &大 小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.92 ...\ttfamily k}) &\PBS\centering bool &大小 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.92 ...family k}) &\PBS\centering bool &大小比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.92 ...ily k}) &\PBS\centering bool &大小比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ... &(int {\ttfamily n}) &\PBS\centering &構 子,{\ttfamily n} 永遠... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ...int {\ttfamily n}) &\PBS\centering &構子 ,{\ttfamily n} 永遠是0 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:永 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ... &\PBS\centering &構子,{\ttfamily n} 永 遠是0 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:遠 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ...PBS\centering &構子,{\ttfamily n} 永遠 是0 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.94 ...\centering &構子,{\ttfamily n} 永遠是 0 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:建 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 ...raggedleft Value &( ) &\PBS\centering &建 構子 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 ...gedleft Value &( ) &\PBS\centering &建構 子 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.95 ...left Value &( ) &\PBS\centering &建構子 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) in alignment at lines 88--96 [][][][][][] [] Underfull \hbox (badness 10000) detected at line 97 [][][] [] ! Package inputenc Error: Unicode char \u8:假 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \-: -\/假 設現在有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \-: -\/假設 現在有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:現 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \-: -\/假設現 在有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \-: -\/假設現在 有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \-: -\/假設現在有 兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \-: -\/假設現在有兩 個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 \-: -\/假設現在有兩個 \-Splay\-Tree {\ttfamily A} 和 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:和 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...有兩個\-Splay\-Tree {\ttfamily A} 和 {\ttfamily B}, 則\-: -\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...-Tree {\ttfamily A} 和 {\ttfamily B}, 則 \-: -\/執行 {\ttfamily B... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:執 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...family A} 和 {\ttfamily B}, 則\-: -\/執 行 {\ttfamily B.\-move\-T... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...ily A} 和 {\ttfamily B}, 則\-: -\/執行 {\ttfamily B.\-move\-To(\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...執行 {\ttfamily B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...B.\-move\-To(\&\-A)} 後 {\ttfamily B} 會 變成空的, {\ttfamily A... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...-move\-To(\&\-A)} 後 {\ttfamily B} 會變 成空的, {\ttfamily A} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...ve\-To(\&\-A)} 後 {\ttfamily B} 會變成 空的, {\ttfamily A} 原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...-To(\&\-A)} 後 {\ttfamily B} 會變成空 的, {\ttfamily A} 原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...(\&\-A)} 後 {\ttfamily B} 會變成空的 , {\ttfamily A} 原本擁... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...mily B} 會變成空的, {\ttfamily A} 原 本擁有的資料也會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...y B} 會變成空的, {\ttfamily A} 原本 擁有的資料也會覆... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擁 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...} 會變成空的, {\ttfamily A} 原本擁 有的資料也會覆蓋... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...變成空的, {\ttfamily A} 原本擁有 的資料也會覆蓋掉 -... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...成空的, {\ttfamily A} 原本擁有的 資料也會覆蓋掉 -\/... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...空的, {\ttfamily A} 原本擁有的資 料也會覆蓋掉 -\/行 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...的, {\ttfamily A} 原本擁有的資料 也會覆蓋掉 -\/行 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:也 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ..., {\ttfamily A} 原本擁有的資料也 會覆蓋掉 -\/行 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ... {\ttfamily A} 原本擁有的資料也會 覆蓋掉 -\/行 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:覆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...ttfamily A} 原本擁有的資料也會覆 蓋掉 -\/行 {\ttfamily A... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:蓋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...amily A} 原本擁有的資料也會覆蓋 掉 -\/行 {\ttfamily A.\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:掉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...ly A} 原本擁有的資料也會覆蓋掉 -\/行 {\ttfamily A.\-mer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...本擁有的資料也會覆蓋掉 -\/行 {\ttfamily A.\-merge(\&\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ... -\/行 {\ttfamily A.\-merge(\&\-B)} 或 {\ttfamily A.\-merge\-Aft... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ... {\ttfamily A.\-merge\-After(\&\-B)} 後 如果檢查發現確實... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...\ttfamily A.\-merge\-After(\&\-B)} 後 如 果檢查發現確實可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...family A.\-merge\-After(\&\-B)} 後 如果 檢查發現確實可以me... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...ily A.\-merge\-After(\&\-B)} 後 如果檢 查發現確實可以merge... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ... A.\-merge\-After(\&\-B)} 後 如果檢查 發現確實可以merge, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:發 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...\-merge\-After(\&\-B)} 後 如果檢查發 現確實可以merge, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:現 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...erge\-After(\&\-B)} 後 如果檢查發現 確實可以merge, 則之... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:確 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...e\-After(\&\-B)} 後 如果檢查發現確 實可以merge, 則之後 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...After(\&\-B)} 後 如果檢查發現確實 可以merge, 則之後 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...er(\&\-B)} 後 如果檢查發現確實可 以merge, 則之後 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...\&\-B)} 後 如果檢查發現確實可以 merge, 則之後 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ... 如果檢查發現確實可以merge, 則 之後 {\ttfamily B} 會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...果檢查發現確實可以merge, 則之 後 {\ttfamily B} 會變... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...檢查發現確實可以merge, 則之後 {\ttfamily B} 會變成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...可以merge, 則之後 {\ttfamily B} 會 變成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...以merge, 則之後 {\ttfamily B} 會變 成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...merge, 則之後 {\ttfamily B} 會變成 空的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...erge, 則之後 {\ttfamily B} 會變成空 的 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.98 ...e, 則之後 {\ttfamily B} 會變成空的 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 100 [][][] [] ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 constructor, 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 146. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 146. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 146. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 清 空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 清空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.197 回 傳是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.197 回傳 是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.197 回傳是 否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.197 回傳是否 為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.197 回傳是否為 空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.197 回傳是否為空 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 回 傳一個指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 回傳 一個指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 回傳一 個指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 回傳一個 指向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 回傳一個指 向\-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 回傳一個指向 \-N\-U\-L\-L的\-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 回傳一個指向\-N\-U\-L\-L的 \-Element, Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 以 供 {\ttfamily find} ,{\ttfamily order} ,{\ttfamily first} ,{\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:供 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 以供 {\ttfamily find} ,{\ttfamily order} ,{\ttfamily first} ,{\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. [185] ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ... ,{\ttfamily first} ,{\ttfamily last} 等 判斷是否有找到相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:判 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...\ttfamily first} ,{\ttfamily last} 等判 斷是否有找到相對... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斷 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...family first} ,{\ttfamily last} 等判斷 是否有找到相對應... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...ily first} ,{\ttfamily last} 等判斷是 否有找到相對應的\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ... first} ,{\ttfamily last} 等判斷是否 有找到相對應的\-Ele... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...rst} ,{\ttfamily last} 等判斷是否有 找到相對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...} ,{\ttfamily last} 等判斷是否有找 到相對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...{\ttfamily last} 等判斷是否有找到 相對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...tfamily last} 等判斷是否有找到相 對應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...mily last} 等判斷是否有找到相對 應的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...y last} 等判斷是否有找到相對應 的\-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.214 ...ast} 等判斷是否有找到相對應的 \-Element Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 刪 除一組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 刪除 一組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 刪除一 組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 刪除一組 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 刪除一組資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.227 刪除一組資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢 查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢查 是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢查是 否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢查是否 已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢查是否已 有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢查是否已有 \-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢查是否已有\-Element的 \-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則刪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...-Element的\-Key 為 {\ttfamily key}, 若 有則刪除之, 並回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...ement的\-Key 為 {\ttfamily key}, 若有 則刪除之, 並回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...nt的\-Key 為 {\ttfamily key}, 若有則 刪除之, 並回傳 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:刪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...\-Key 為 {\ttfamily key}, 若有則刪 除之, 並回傳 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...-Key 為 {\ttfamily key}, 若有則刪除 之, 並回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...y 為 {\ttfamily key}, 若有則刪除之 , 並回傳 {\ttfamily tru... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ... {\ttfamily key}, 若有則刪除之, 並 回傳 {\ttfamily true}, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...ttfamily key}, 若有則刪除之, 並回 傳 {\ttfamily true}, 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...amily key}, 若有則刪除之, 並回傳 {\ttfamily true}, 否則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...除之, 並回傳 {\ttfamily true}, 否 則則回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...之, 並回傳 {\ttfamily true}, 否則 則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ..., 並回傳 {\ttfamily true}, 否則則 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ... 並回傳 {\ttfamily true}, 否則則回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.229 ...回傳 {\ttfamily true}, 否則則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 找 出 Key= {\ttfamily k} 的\-Elemenet 並回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 找出 Key= {\ttfamily k} 的\-Elemenet 並回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 找出 Key= {\ttfamily k} 的 \-Elemenet 並回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 找出 Key= {\ttfamily k} 的\-Elemenet 並 回傳. 找不到的話回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ... Key= {\ttfamily k} 的\-Elemenet 並回 傳. 找不到的話回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ...ey= {\ttfamily k} 的\-Elemenet 並回傳 . 找不到的話回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ...\ttfamily k} 的\-Elemenet 並回傳. 找 不到的話回傳 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ...family k} 的\-Elemenet 並回傳. 找不 到的話回傳 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ...ily k} 的\-Elemenet 並回傳. 找不到 的話回傳 {\ttfamily th... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ... k} 的\-Elemenet 並回傳. 找不到的 話回傳 {\ttfamily this-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ... 的\-Elemenet 並回傳. 找不到的話 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ...\-Elemenet 並回傳. 找不到的話回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.242 ...Elemenet 並回傳. 找不到的話回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回 傳\-Key最小的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳 \-Key最小的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳\-Key最 小的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳\-Key最小 的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳\-Key最小的 \-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳\-Key最小的\-Element, 如 果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 回傳\-Key最小的\-Element, 如果 \-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 ...小的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 ...的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 ...lement, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.257 ...ent, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:插 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 插 入一組{\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 插入 一組{\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 插入一 組{\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 插入一組 {\ttfamily }(Key ---$>$ {\ttfamily Value}) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢 查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢查 是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢查是 否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢查是否 已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢查是否已 有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢查是否已有 \-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢查是否已有\-Element的 \-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...-Element的\-Key 為 {\ttfamily key}, 若 有則回傳 {\ttfamily fa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...ement的\-Key 為 {\ttfamily key}, 若有 則回傳 {\ttfamily false... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...nt的\-Key 為 {\ttfamily key}, 若有則 回傳 {\ttfamily false} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...\-Key 為 {\ttfamily key}, 若有則回 傳 {\ttfamily false} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...-Key 為 {\ttfamily key}, 若有則回傳 {\ttfamily false} , 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ..., 若有則回傳 {\ttfamily false} , 否 則將 一個 (Key -\/$>$ ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...有則回傳 {\ttfamily false} , 否則 將 一個 (Key -\/$>$ Val... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...則回傳 {\ttfamily false} , 否則將 一個 (Key -\/$>$ Value)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...回傳 {\ttfamily false} , 否則將 一 個 (Key -\/$>$ Value) = (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...傳 {\ttfamily false} , 否則將 一個 (Key -\/$>$ Value) = ({\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...tfamily key} -\/$>$ {\ttfamily value})的 \-Element加入, 並回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ... -\/$>$ {\ttfamily value})的\-Element加 入, 並回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 .../$>$ {\ttfamily value})的\-Element加入 , 並回傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...{\ttfamily value})的\-Element加入, 並 回傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...tfamily value})的\-Element加入, 並回 傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...mily value})的\-Element加入, 並回傳 {\ttfamily true} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 將 所有\-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 將所 有\-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 將所有 \-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 將所有\-Element的 \-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 將所有\-Element的\-Key同 加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 將所有\-Element的\-Key同加 上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 將所有\-Element的\-Key同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 回 傳\-Key最大的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 回傳 \-Key最大的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 回傳\-Key最 大的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 回傳\-Key最大 的\-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 回傳\-Key最大的 \-Element, 如果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 回傳\-Key最大的\-Element, 如 果\-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 回傳\-Key最大的\-Element, 如果 \-Splay\-Tree為空, 則回傳 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...大的\-Element, 如果\-Splay\-Tree為 空, 則回傳 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...的\-Element, 如果\-Splay\-Tree為空 , 則回傳 {\ttfamily thi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...\-Element, 如果\-Splay\-Tree為空, 則 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...lement, 如果\-Splay\-Tree為空, 則回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 ...ent, 如果\-Splay\-Tree為空, 則回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找 出第一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出 第一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出第 一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出第一 個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出第一個 (最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出第一個(最 小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出第一個(最小 的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出第一個(最小的 ) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 找出第一個(最小的) Element且 {\ttfamily k} $<$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 ...小的) Element且 {\ttfamily k} $<$= 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 ...的) Element且 {\ttfamily k} $<$= 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 ...ent且 {\ttfamily k} $<$= 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 ...且 {\ttfamily k} $<$= 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 ... {\ttfamily k} $<$= 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 ...ttfamily k} $<$= 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.318 ...amily k} $<$= 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.320 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.320 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.320 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.320 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.320 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.320 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.320 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 合 併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.333 合併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢 查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查 是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是 否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否 自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否自 己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否自己 中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否自己中 的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否自己中的 Key 都 小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否自己中的 Key 都小 於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...的 Key 都小於 {\ttfamily tree2} 中 的\-Key, 或是完全相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ... Key 都小於 {\ttfamily tree2} 中的 \-Key, 或是完全相反,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...小於 {\ttfamily tree2} 中的\-Key, 或 是完全相反, 是的話... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...於 {\ttfamily tree2} 中的\-Key, 或是 完全相反, 是的話把... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ... {\ttfamily tree2} 中的\-Key, 或是完 全相反, 是的話把 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...ttfamily tree2} 中的\-Key, 或是完全 相反, 是的話把 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...amily tree2} 中的\-Key, 或是完全相 反, 是的話把 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:反 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...ly tree2} 中的\-Key, 或是完全相反 , 是的話把 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...ee2} 中的\-Key, 或是完全相反, 是 的話把 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...} 中的\-Key, 或是完全相反, 是的 話把 {\ttfamily tree2`... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...的\-Key, 或是完全相反, 是的話 把 {\ttfamily tree2`中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...\-Key, 或是完全相反, 是的話把 {\ttfamily tree2`中的} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...相反, 是的話把 {\ttfamily tree2`中 的} \hyperlink{classmeow_... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...反, 是的話把 {\ttfamily tree2`中的 } \hyperlink{classmeow_1_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...SplayTree__Range_1_1Element}{Element} 都 搬到自己這, 同時清... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:搬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...ayTree__Range_1_1Element}{Element} 都搬 到自己這, 同時清空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...ree__Range_1_1Element}{Element} 都搬到 自己這, 同時清空 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...__Range_1_1Element}{Element} 都搬到自 己這, 同時清空 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...ange_1_1Element}{Element} 都搬到自己 這, 同時清空 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...e_1_1Element}{Element} 都搬到自己這 , 同時清空 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...Element}{Element} 都搬到自己這, 同 時清空 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...ment}{Element} 都搬到自己這, 同時 清空 {\ttfamily tree2} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...t}{Element} 都搬到自己這, 同時清 空 {\ttfamily tree2} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...Element} 都搬到自己這, 同時清空 {\ttfamily tree2} , 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...這, 同時清空 {\ttfamily tree2} , 否 則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ..., 同時清空 {\ttfamily tree2} , 否則 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...時清空 {\ttfamily tree2} , 否則回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.335 ...清空 {\ttfamily tree2} , 否則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 合 併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:併 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 合併 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢 查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查 是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是 否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否 自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否自 己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否自己 中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否自己中 的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否自己中的 Key 都 小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否自己中的 Key 都小 於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 檢查是否自己中的 Key 都小於 {\ttfamily tree2} 中的\-Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...的 Key 都小於 {\ttfamily tree2} 中 的\-Key, 是的話把 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ... Key 都小於 {\ttfamily tree2} 中的 \-Key, 是的話把 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...小於 {\ttfamily tree2} 中的\-Key, 是 的話把 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...於 {\ttfamily tree2} 中的\-Key, 是的 話把 {\ttfamily tree2`} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ... {\ttfamily tree2} 中的\-Key, 是的話 把 {\ttfamily tree2`} 中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...ttfamily tree2} 中的\-Key, 是的話把 {\ttfamily tree2`} 中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...-Key, 是的話把 {\ttfamily tree2`} 中 的 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...y, 是的話把 {\ttfamily tree2`} 中的 \hyperlink{classmeow_1_1S... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...SplayTree__Range_1_1Element}{Element} 都 搬到自己這, 同時清... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:搬 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...ayTree__Range_1_1Element}{Element} 都搬 到自己這, 同時清空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...ree__Range_1_1Element}{Element} 都搬到 自己這, 同時清空 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...__Range_1_1Element}{Element} 都搬到自 己這, 同時清空 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...ange_1_1Element}{Element} 都搬到自己 這, 同時清空 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...e_1_1Element}{Element} 都搬到自己這 , 同時清空 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...Element}{Element} 都搬到自己這, 同 時清空 {\ttfamily tree2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...ment}{Element} 都搬到自己這, 同時 清空 {\ttfamily tree2} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...t}{Element} 都搬到自己這, 同時清 空 {\ttfamily tree2} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...Element} 都搬到自己這, 同時清空 {\ttfamily tree2} , 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...這, 同時清空 {\ttfamily tree2} , 否 則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ..., 同時清空 {\ttfamily tree2} , 否則 回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...時清空 {\ttfamily tree2} , 否則回 傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.350 ...清空 {\ttfamily tree2} , 否則回傳 {\ttfamily false} Your command was ignored. Type I to replace it with another command, or to continue without it. [186] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將 資料都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將資 料都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將資料 都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將資料都 丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將資料都丟 到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將資料都丟到 {\ttfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:身 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將資料都丟到 {\ttfamily tree2} 身 上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 將資料都丟到 {\ttfamily tree2} 身上 , 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 ...都丟到 {\ttfamily tree2} 身上, 並 且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 ...丟到 {\ttfamily tree2} 身上, 並且 清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 ...到 {\ttfamily tree2} 身上, 並且清 空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 ... {\ttfamily tree2} 身上, 並且清空 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 ...{\ttfamily tree2} 身上, 並且清空自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.363 ...tfamily tree2} 身上, 並且清空自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.393 就 像{\ttfamily stl\-::map\-::operator}\mbox{[}\mbox{]} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.393 就像 {\ttfamily stl\-::map\-::operator}\mbox{[}\mbox{]} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會 先檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:先 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先 檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先檢 查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先檢查 是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先檢查是 否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先檢查是否 已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先檢查是否已 有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先檢查是否已有 \-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 會先檢查是否已有\-Element的 \-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...檢查是否已有\-Element的\-Key 為 {\ttfamily key}, 若有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...-Element的\-Key 為 {\ttfamily key}, 若 有則回傳相對應的\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...ement的\-Key 為 {\ttfamily key}, 若有 則回傳相對應的\-Val... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...nt的\-Key 為 {\ttfamily key}, 若有則 回傳相對應的\-Value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...\-Key 為 {\ttfamily key}, 若有則回 傳相對應的\-Value的\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...-Key 為 {\ttfamily key}, 若有則回傳 相對應的\-Value的\-Re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...y 為 {\ttfamily key}, 若有則回傳相 對應的\-Value的\-Refer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ... {\ttfamily key}, 若有則回傳相對 應的\-Value的\-Referenc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...{\ttfamily key}, 若有則回傳相對應 的\-Value的\-Reference ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...tfamily key}, 若有則回傳相對應的 \-Value的\-Reference 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...y}, 若有則回傳相對應的\-Value的 \-Reference 否則先執... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...傳相對應的\-Value的\-Reference 否 則先執行 {\ttfamily in... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...相對應的\-Value的\-Reference 否則 先執行 {\ttfamily inser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:先 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...對應的\-Value的\-Reference 否則先 執行 {\ttfamily insert(k... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:執 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...應的\-Value的\-Reference 否則先執 行 {\ttfamily insert(key,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...的\-Value的\-Reference 否則先執行 {\ttfamily insert(key,\-V... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:再 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...行 {\ttfamily insert(key,\-Value())} 再 回傳相對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ... {\ttfamily insert(key,\-Value())} 再回 傳相對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...ttfamily insert(key,\-Value())} 再回傳 相對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...amily insert(key,\-Value())} 再回傳相 對應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...ly insert(key,\-Value())} 再回傳相對 應的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:應 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...insert(key,\-Value())} 再回傳相對應 的\-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.395 ...ert(key,\-Value())} 再回傳相對應的 \-Reference Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將 \-Elements依照\-Key由小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依 照\-Key由小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依照 \-Key由小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依照\-Key由 小到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依照\-Key由小 到大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依照\-Key由小到 大排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依照\-Key由小到大 排序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依照\-Key由小到大排 序, 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 將\-Elements依照\-Key由小到大排序 , 回傳第 {\ttfamily ord} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 ...lements依照\-Key由小到大排序, 回 傳第 {\ttfamily ord} 個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 ...ents依照\-Key由小到大排序, 回傳 第 {\ttfamily ord} 個\-E... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 ...s依照\-Key由小到大排序, 回傳第 {\ttfamily ord} 個\-Elem... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 ...大排序, 回傳第 {\ttfamily ord} 個 \-Element (由0算起). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 ...傳第 {\ttfamily ord} 個\-Element (由 0算起). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 ...第 {\ttfamily ord} 個\-Element (由0算 起). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.408 ... {\ttfamily ord} 個\-Element (由0算起 ). Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 其 中如果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 其中 如果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 其中如 果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 其中如果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 其中如果 {\ttfamily ord$>$N-\/1}, 則 會回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 其中如果 {\ttfamily ord$>$N-\/1}, 則會 回傳 {\ttfamily this-\/$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 ...如果 {\ttfamily ord$>$N-\/1}, 則會回 傳 {\ttfamily this-\/$>$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.410 ...果 {\ttfamily ord$>$N-\/1}, 則會回傳 {\ttfamily this-\/$>$\hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.423 查 找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.423 查找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢 問目前整個range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢問 目前整個range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢問目 前整個range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢問目前 整個range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:整 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢問目前整 個range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢問目前整個 range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢問目前整個range的 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.425 詢問目前整個range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.439 查 找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.439 查找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:詢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 詢 問給定range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:問 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 詢問 給定range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 詢問給 定range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 詢問給定 range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 詢問給定range的 值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.441 詢問給定range的值 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找 出第一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出 第一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出第 一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出第一 個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出第一個 (最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出第一個(最 小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出第一個(最小 的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出第一個(最小的 ) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 找出第一個(最小的) Element且 {\ttfamily k} $>$= 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 ...小的) Element且 {\ttfamily k} $>$= 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 ...的) Element且 {\ttfamily k} $>$= 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 ...ent且 {\ttfamily k} $>$= 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 ...且 {\ttfamily k} $>$= 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 ... {\ttfamily k} $>$= 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 ...ttfamily k} $>$= 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.454 ...amily k} $>$= 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.456 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.456 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.456 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.456 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.456 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.456 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.456 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找 出第一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出 第一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出第 一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出第一 個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出第一個 (最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出第一個(最 小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出第一個(最小 的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出第一個(最小的 ) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 找出第一個(最小的) Element且 {\ttfamily k} $>$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 ...小的) Element且 {\ttfamily k} $>$ 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 ...的) Element且 {\ttfamily k} $>$ 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 ...ment且 {\ttfamily k} $>$ 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 ...t且 {\ttfamily k} $>$ 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 ... {\ttfamily k} $>$ 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 ...\ttfamily k} $>$ 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.469 ...family k} $>$ 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.471 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.471 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.471 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.471 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.471 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.471 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.471 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.484 回 傳資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.484 回傳 資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.484 回傳資 料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.484 回傳資料 個數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.484 回傳資料個 數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.484 回傳資料個數 Your command was ignored. Type I to replace it with another command, or to continue without it. [187] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 將 {\ttfamily tree2} 清空, 再將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 將{\ttfamily tree2} 清 空, 再將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 將{\ttfamily tree2} 清空 , 再將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:再 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 將{\ttfamily tree2} 清空, 再 將所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 將{\ttfamily tree2} 清空, 再將 所有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 將{\ttfamily tree2} 清空, 再將所 有\-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 將{\ttfamily tree2} 清空, 再將所有 \-Key $>$ {\ttfamily upper\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 ...-Key $>$ {\ttfamily upper\-\_\-bound} 的 \-Element都丟過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 ...tfamily upper\-\_\-bound} 的\-Element都 丟過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 ...mily upper\-\_\-bound} 的\-Element都丟 過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 ...y upper\-\_\-bound} 的\-Element都丟過 去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:去 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.500 ...pper\-\_\-bound} 的\-Element都丟過去 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找 出第一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出 第一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出第 一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出第一 個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出第一個 (最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出第一個(最 小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出第一個(最小 的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出第一個(最小的 ) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 找出第一個(最小的) Element且 {\ttfamily k} $<$ 它的 Key, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:它 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 ...小的) Element且 {\ttfamily k} $<$ 它 的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 ...的) Element且 {\ttfamily k} $<$ 它的 Key, 並且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 ...ment且 {\ttfamily k} $<$ 它的 Key, 並 且回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 ...t且 {\ttfamily k} $<$ 它的 Key, 並且 回傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 ... {\ttfamily k} $<$ 它的 Key, 並且回 傳之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 ...\ttfamily k} $<$ 它的 Key, 並且回傳 之. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.515 ...family k} $<$ 它的 Key, 並且回傳之 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.517 找 不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.517 找不 到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.517 找不到 的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.517 找不到的 話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.517 找不到的話 回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.517 找不到的話回 傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.517 找不到的話回傳 {\ttfamily this-\/$>$\hyperlink{classmeow_1_1Spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.530 將 所有\-Element的\-Value同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.530 將所 有\-Element的\-Value同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.530 將所有 \-Element的\-Value同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.530 將所有\-Element的 \-Value同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:同 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.530 將所有\-Element的\-Value同 加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.530 將所有\-Element的\-Value同加 上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.530 將所有\-Element的\-Value同加上 {\ttfamily delta} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將 所有\-Element的\-Value全部設定成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所 有\-Element的\-Value全部設定成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所有 \-Element的\-Value全部設定成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所有\-Element的 \-Value全部設定成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:全 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所有\-Element的\-Value全 部設定成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所有\-Element的\-Value全部 設定成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所有\-Element的\-Value全部設 定成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所有\-Element的\-Value全部設定 成{\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.545 將所有\-Element的\-Value全部設定成 {\ttfamily value} Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1Transformation.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. File: classmeow_1_1Transformation.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1Transformation.pdf used on input line 16. (pdftex.def) Requested size: 398.3531pt x 66.66747pt. [188 <./classmeow_1_1Transformation.pdf>] Underfull \hbox (badness 10000) detected at line 70 [][][] [] [189] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 130. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 130. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 130. Underfull \hbox (badness 10000) detected at line 154 [][][] [] Underfull \hbox (badness 10000) detected at line 172 [][][] [] Underfull \hbox (badness 10000) detected at line 190 [][][] [] [190] Underfull \hbox (badness 10000) detected at line 208 [][][] [] Underfull \hbox (badness 10000) detected at line 231 [][][] [] Underfull \hbox (badness 10000) detected at line 261 [][][] [] Underfull \hbox (badness 10000) detected at line 288 [][][] [] [191] [192] Underfull \hbox (badness 10000) detected at line 318 [][][] [] Underfull \hbox (badness 10000) detected at line 340 [][][] [] Underfull \hbox (badness 10000) detected at line 358 [][][] [] Underfull \hbox (badness 10000) detected at line 381 [][][] [] Underfull \hbox (badness 10000) detected at line 407 [][][] [] [193] Underfull \hbox (badness 10000) detected at line 425 [][][] [] Underfull \hbox (badness 10000) detected at line 448 [][][] [] Underfull \hbox (badness 10000) detected at line 471 [][][] [] Underfull \hbox (badness 10000) detected at line 494 [][][] [] ) (./classmeow_1_1Usage.tex ! Package inputenc Error: Unicode char \u8:管 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管 理參數設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:理 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理 參數設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理參 數設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理參數 設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理參數設 置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理參數設置 , 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理參數設置, 自 訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理參數設置, 自訂 usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 管理參數設置, 自訂usage document, 分 析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:析 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...參數設置, 自訂usage document, 分析 argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. [194] ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 將 另一個usage的設置匯入 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 將另 一個usage的設置匯入 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...n{DoxyCompactList}\small\item\em 將另一 個usage的設置匯入 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...oxyCompactList}\small\item\em 將另一個 usage的設置匯入 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...ctList}\small\item\em 將另一個usage的 設置匯入 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...ist}\small\item\em 將另一個usage的設 置匯入 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...}\small\item\em 將另一個usage的設置 匯入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:匯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...mall\item\em 將另一個usage的設置匯 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...l\item\em 將另一個usage的設置匯入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 將 另一個usage的選項設置... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 \begin{DoxyCompactList}\small\item\em 將另 一個usage的選項設置... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...n{DoxyCompactList}\small\item\em 將另一 個usage的選項設置加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...oxyCompactList}\small\item\em 將另一個 usage的選項設置加進... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...ctList}\small\item\em 將另一個usage的 選項設置加進來 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...ist}\small\item\em 將另一個usage的選 項設置加進來 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...}\small\item\em 將另一個usage的選項 設置加進來 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...mall\item\em 將另一個usage的選項設 置加進來 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...l\item\em 將另一個usage的選項設置 加進來 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...tem\em 將另一個usage的選項設置加 進來 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:進 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ...\em 將另一個usage的選項設置加進 來 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.25 ... 將另一個usage的選項設置加進來 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 新 增一個沒有額外選項的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 \begin{DoxyCompactList}\small\item\em 新增 一個沒有額外選項的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...n{DoxyCompactList}\small\item\em 新增一 個沒有額外選項的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...oxyCompactList}\small\item\em 新增一個 沒有額外選項的選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...CompactList}\small\item\em 新增一個沒 有額外選項的選項 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...pactList}\small\item\em 新增一個沒有 額外選項的選項 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...tList}\small\item\em 新增一個沒有額 外選項的選項 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...st}\small\item\em 新增一個沒有額外 選項的選項 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\small\item\em 新增一個沒有額外選 項的選項 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...all\item\em 新增一個沒有額外選項 的選項 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...\item\em 新增一個沒有額外選項的 選項 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...em\em 新增一個沒有額外選項的選 項 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.27 ...em 新增一個沒有額外選項的選項 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 新 增一個有額外選項的選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 \begin{DoxyCompactList}\small\item\em 新增 一個有額外選項的選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...n{DoxyCompactList}\small\item\em 新增一 個有額外選項的選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...oxyCompactList}\small\item\em 新增一個 有額外選項的選項 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...CompactList}\small\item\em 新增一個有 額外選項的選項 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...pactList}\small\item\em 新增一個有額 外選項的選項 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...tList}\small\item\em 新增一個有額外 選項的選項 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...st}\small\item\em 新增一個有額外選 項的選項 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...\small\item\em 新增一個有額外選項 的選項 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...all\item\em 新增一個有額外選項的 選項 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...\item\em 新增一個有額外選項的選 項 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.29 ...em\em 新增一個有額外選項的選項 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:針 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 針 對-\/(opt)新增一個可接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 \begin{DoxyCompactList}\small\item\em 針對 -\/(opt)新增一個可接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...mpactList}\small\item\em 針對-\/(opt)新 增一個可接受的額... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...ctList}\small\item\em 針對-\/(opt)新增 一個可接受的額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...ist}\small\item\em 針對-\/(opt)新增一 個可接受的額外選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...}\small\item\em 針對-\/(opt)新增一個 可接受的額外選項 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...mall\item\em 針對-\/(opt)新增一個可 接受的額外選項 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...l\item\em 針對-\/(opt)新增一個可接 受的額外選項 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:受 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...tem\em 針對-\/(opt)新增一個可接受 的額外選項 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...\em 針對-\/(opt)新增一個可接受的 額外選項 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ... 針對-\/(opt)新增一個可接受的額 外選項 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...對-\/(opt)新增一個可接受的額外 選項 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 ...-\/(opt)新增一個可接受的額外選 項 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.31 .../(opt)新增一個可接受的額外選項 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 回 傳是否有設定此選項 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 回傳 是否有設定此選項 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...n{DoxyCompactList}\small\item\em 回傳是 否有設定此選項 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...oxyCompactList}\small\item\em 回傳是否 有設定此選項 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...CompactList}\small\item\em 回傳是否有 設定此選項 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...pactList}\small\item\em 回傳是否有設 定此選項 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...tList}\small\item\em 回傳是否有設定 此選項 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...st}\small\item\em 回傳是否有設定此 選項 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...\small\item\em 回傳是否有設定此選 項 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...all\item\em 回傳是否有設定此選項 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 回 傳參數 {\bfseries -\/}(opt)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 回傳 參數 {\bfseries -\/}(opt)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...n{DoxyCompactList}\small\item\em 回傳參 數 {\bfseries -\/}(opt) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...oxyCompactList}\small\item\em 回傳參數 {\bfseries -\/}(opt) 被... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...m\em 回傳參數 {\bfseries -\/}(opt) 被 設置幾次 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...m 回傳參數 {\bfseries -\/}(opt) 被設 置幾次 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...傳參數 {\bfseries -\/}(opt) 被設置 幾次 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...參數 {\bfseries -\/}(opt) 被設置幾 次 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...數 {\bfseries -\/}(opt) 被設置幾次 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 回 傳參數 {\bfseries -\/}(opt)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 回傳 參數 {\bfseries -\/}(opt)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...n{DoxyCompactList}\small\item\em 回傳參 數 {\bfseries -\/}(opt) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...oxyCompactList}\small\item\em 回傳參數 {\bfseries -\/}(opt) 的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...m\em 回傳參數 {\bfseries -\/}(opt) 的 第 {\bfseries index} 個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...m 回傳參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...ies -\/}(opt) 的第 {\bfseries index} 個 額外選項 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ... -\/}(opt) 的第 {\bfseries index} 個額 外選項 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 .../}(opt) 的第 {\bfseries index} 個額外 選項 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...opt) 的第 {\bfseries index} 個額外選 項 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...) 的第 {\bfseries index} 個額外選項 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 取 得有幾個process arguments ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 取得 有幾個process arguments ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...n{DoxyCompactList}\small\item\em 取得有 幾個process arguments \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...oxyCompactList}\small\item\em 取得有幾 個process arguments \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...CompactList}\small\item\em 取得有幾個 process arguments \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 取 得第i個process argument \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 取得 第i個process argument \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...n{DoxyCompactList}\small\item\em 取得第 i個process argument \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 ...xyCompactList}\small\item\em 取得第i個 process argument \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 取 得process arguments array \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 取得 process arguments array \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 新 增一段usage document於每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 新增 一段usage document於每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...n{DoxyCompactList}\small\item\em 新增一 段usage document於每個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...oxyCompactList}\small\item\em 新增一段 usage document於每個選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...mall\item\em 新增一段usage document於 每個選項逐條說明... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...l\item\em 新增一段usage document於每 個選項逐條說明之... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...tem\em 新增一段usage document於每個 選項逐條說明之前 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...\em 新增一段usage document於每個選 項逐條說明之前 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ... 新增一段usage document於每個選項 逐條說明之前 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:逐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...增一段usage document於每個選項逐 條說明之前 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:條 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...一段usage document於每個選項逐條 說明之前 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...段usage document於每個選項逐條說 明之前 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:明 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...usage document於每個選項逐條說明 之前 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ...age document於每個選項逐條說明之 前 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 ... document於每個選項逐條說明之前 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 新 增一段usage document於每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 新增 一段usage document於每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...n{DoxyCompactList}\small\item\em 新增一 段usage document於每個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...oxyCompactList}\small\item\em 新增一段 usage document於每個選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...mall\item\em 新增一段usage document於 每個選項逐條說明... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...l\item\em 新增一段usage document於每 個選項逐條說明之... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...tem\em 新增一段usage document於每個 選項逐條說明之後 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...\em 新增一段usage document於每個選 項逐條說明之後 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ... 新增一段usage document於每個選項 逐條說明之後 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:逐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...增一段usage document於每個選項逐 條說明之後 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:條 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...一段usage document於每個選項逐條 說明之後 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...段usage document於每個選項逐條說 明之後 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:明 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...usage document於每個選項逐條說明 之後 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...age document於每個選項逐條說明之 後 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ... document於每個選項逐條說明之後 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 回 傳usage string \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 回傳 usage string \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 給 定argc, argv, 將各參數設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 給定 argc, argv, 將各參數設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...tList}\small\item\em 給定argc, argv, 將 各參數設置 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:各 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...st}\small\item\em 給定argc, argv, 將各 參數設置 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...\small\item\em 給定argc, argv, 將各參 數設置 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...all\item\em 給定argc, argv, 將各參數 設置 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...\item\em 給定argc, argv, 將各參數設 置 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...em\em 給定argc, argv, 將各參數設置 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:管 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管 理參數設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:理 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理 參數設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理參 數設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理參數 設置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理參數設 置, 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理參數設置 , 自訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理參數設置, 自 訂usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理參數設置, 自訂 usage document, 分析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 管理參數設置, 自訂usage document, 分 析argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:析 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 ...參數設置, 自訂usage document, 分析 argc, argv Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...\hyperlink{classmeow_1_1Usage}{Usage}} 是 用來分析argc, argv和... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...perlink{classmeow_1_1Usage}{Usage}} 是用 來分析argc, argv和輸... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...link{classmeow_1_1Usage}{Usage}} 是用來 分析argc, argv和輸出u... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...k{classmeow_1_1Usage}{Usage}} 是用來分 析argc, argv和輸出usag... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:析 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...lassmeow_1_1Usage}{Usage}} 是用來分析 argc, argv和輸出usage d... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:和 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...sage}{Usage}} 是用來分析argc, argv和 輸出usage document的cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...e}{Usage}} 是用來分析argc, argv和輸 出usage document的class.... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...Usage}} 是用來分析argc, argv和輸出 usage document的class. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 ...分析argc, argv和輸出usage document的 class. \par Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的 部份, 有以下規則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:部 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的部 份, 有以下規則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:份 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的部份 , 有以下規則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的部份, 有 以下規則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的部份, 有以 下規則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:下 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的部份, 有以下 規則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:規 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的部份, 有以下規 則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.58 argc, argv的部份, 有以下規則 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \item {\bfseries -\/c} 其 中 {\itshape c} 可以代換成一個字符,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 \item {\bfseries -\/c} 其中 {\itshape c} 可以代換成一個字符,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...m {\bfseries -\/c} 其中 {\itshape c} 可 以代換成一個字符, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...\bfseries -\/c} 其中 {\itshape c} 可以 代換成一個字符, 這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...series -\/c} 其中 {\itshape c} 可以代 換成一個字符, 這種... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:換 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...ies -\/c} 其中 {\itshape c} 可以代換 成一個字符, 這種選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ... -\/c} 其中 {\itshape c} 可以代換成 一個字符, 這種選像... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 .../c} 其中 {\itshape c} 可以代換成一 個字符, 這種選像可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ... 其中 {\itshape c} 可以代換成一個 字符, 這種選像可能... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...中 {\itshape c} 可以代換成一個字 符, 這種選像可能是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ... {\itshape c} 可以代換成一個字符 , 這種選像可能是 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...tshape c} 可以代換成一個字符, 這 種選像可能是 {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...ape c} 可以代換成一個字符, 這種 選像可能是 {\bfseries... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ... c} 可以代換成一個字符, 這種選 像可能是 {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ... 可以代換成一個字符, 這種選像 可能是 {\bfseries 有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...以代換成一個字符, 這種選像可 能是 {\bfseries 有設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...代換成一個字符, 這種選像可能 是 {\bfseries 有設置} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...換成一個字符, 這種選像可能是 {\bfseries 有設置} 或... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...符, 這種選像可能是 {\bfseries 有 設置} 或 {\bfseries 沒... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ..., 這種選像可能是 {\bfseries 有設 置} 或 {\bfseries 沒設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...這種選像可能是 {\bfseries 有設置 } 或 {\bfseries 沒設置} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...選像可能是 {\bfseries 有設置} 或 {\bfseries 沒設置} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ... {\bfseries 有設置} 或 {\bfseries 沒 設置} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...\bfseries 有設置} 或 {\bfseries 沒設 置} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.60 ...series 有設置} 或 {\bfseries 沒設置 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:附 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \item {\bfseries -\/c} {\itshape value} 附 加一個 {\itshape value} ,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...m {\bfseries -\/c} {\itshape value} 附加 一個 {\itshape value} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...\bfseries -\/c} {\itshape value} 附加一 個 {\itshape value} , 這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...series -\/c} {\itshape value} 附加一個 {\itshape value} , 這種... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...value} 附加一個 {\itshape value} , 這 種選項可以是 {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...ue} 附加一個 {\itshape value} , 這種 選項可以是 {\bfseries... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... 附加一個 {\itshape value} , 這種選 項可以是 {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...加一個 {\itshape value} , 這種選項 可以是 {\bfseries 選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...一個 {\itshape value} , 這種選項可 以是 {\bfseries 選擇... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...個 {\itshape value} , 這種選項可以 是 {\bfseries 選擇性} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... {\itshape value} , 這種選項可以是 {\bfseries 選擇性} 或... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...ue} , 這種選項可以是 {\bfseries 選 擇性} 或 {\bfseries 必... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擇 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... , 這種選項可以是 {\bfseries 選擇 性} 或 {\bfseries 必要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:性 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...這種選項可以是 {\bfseries 選擇性 } 或 {\bfseries 必要的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:或 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...選項可以是 {\bfseries 選擇性} 或 {\bfseries 必要的} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... {\bfseries 選擇性} 或 {\bfseries 必 要的} , 另外可以給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...\bfseries 選擇性} 或 {\bfseries 必要 的} , 另外可以給定v... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...series 選擇性} 或 {\bfseries 必要的 } , 另外可以給定valu... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...選擇性} 或 {\bfseries 必要的} , 另 外可以給定value的預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...擇性} 或 {\bfseries 必要的} , 另外 可以給定value的預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...性} 或 {\bfseries 必要的} , 另外可 以給定value的預設值... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...} 或 {\bfseries 必要的} , 另外可以 給定value的預設值以... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... {\bfseries 必要的} , 另外可以給 定value的預設值以及... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...{\bfseries 必要的} , 另外可以給定 value的預設值以及哪... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...es 必要的} , 另外可以給定value的 預設值以及哪些value... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...必要的} , 另外可以給定value的預 設值以及哪些value是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...要的} , 另外可以給定value的預設 值以及哪些value是可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...的} , 另外可以給定value的預設值 以及哪些value是可接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...} , 另外可以給定value的預設值以 及哪些value是可接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:及 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ... 另外可以給定value的預設值以及 哪些value是可接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:哪 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...外可以給定value的預設值以及哪 些value是可接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:些 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...可以給定value的預設值以及哪些 value是可接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...定value的預設值以及哪些value是 可接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...value的預設值以及哪些value是可 接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...alue的預設值以及哪些value是可接 受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:受 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...e的預設值以及哪些value是可接受 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \item {\itshape value} 其 他, 一律視為 {\bfseries process} {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:他 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \item {\itshape value} 其他 , 一律視為 {\bfseries process} {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \item {\itshape value} 其他, 一 律視為 {\bfseries process} {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:律 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \item {\itshape value} 其他, 一律 視為 {\bfseries process} {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:視 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \item {\itshape value} 其他, 一律視 為 {\bfseries process} {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.62 \item {\itshape value} 其他, 一律視為 {\bfseries process} {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 65 [][][] [] ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 所 有說明文字中 {\itshape $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 所有 說明文字中 {\itshape $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 所有說 明文字中 {\itshape $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:明 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 所有說明 文字中 {\itshape $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:文 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 所有說明文 字中 {\itshape $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 所有說明文字 中 {\itshape $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 所有說明文字中 {\itshape $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. [195] ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...說明文字中 {\itshape $<$name$>$} 都 會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...明文字中 {\itshape $<$name$>$} 都會 被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...文字中 {\itshape $<$name$>$} 都會被 代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...字中 {\itshape $<$name$>$} 都會被代 換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:換 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...中 {\itshape $<$name$>$} 都會被代換 成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ... {\itshape $<$name$>$} 都會被代換成 空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...\itshape $<$name$>$} 都會被代換成空 字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...shape $<$name$>$} 都會被代換成空字 串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.86 ...pe $<$name$>$} 都會被代換成空字串 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 所 有說明文字中 {\itshape \char`\"{}$<$name$>$\char`\"{}} 都會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 所有 說明文字中 {\itshape \char`\"{}$<$name$>$\char`\"{}} 都會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 所有說 明文字中 {\itshape \char`\"{}$<$name$>$\char`\"{}} 都會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:明 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 所有說明 文字中 {\itshape \char`\"{}$<$name$>$\char`\"{}} 都會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:文 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 所有說明文 字中 {\itshape \char`\"{}$<$name$>$\char`\"{}} 都會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 所有說明文字 中 {\itshape \char`\"{}$<$name$>$\char`\"{}} 都會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 所有說明文字中 {\itshape \char`\"{}$<$name$>$\char`\"{}} 都會... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...shape \char`\"{}$<$name$>$\char`\"{}} 都 會被代換成空字串 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...pe \char`\"{}$<$name$>$\char`\"{}} 都會 被代換成空字串 {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...\char`\"{}$<$name$>$\char`\"{}} 都會被 代換成空字串 {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...ar`\"{}$<$name$>$\char`\"{}} 都會被代 換成空字串 {\bfseries... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:換 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...\"{}$<$name$>$\char`\"{}} 都會被代換 成空字串 {\bfseries name} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...}$<$name$>$\char`\"{}} 都會被代換成 空字串 {\bfseries name} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...$name$>$\char`\"{}} 都會被代換成空 字串 {\bfseries name} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...me$>$\char`\"{}} 都會被代換成空字 串 {\bfseries name} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.101 ...>$\char`\"{}} 都會被代換成空字串 {\bfseries name} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將 另一個usage原封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另 一個usage原封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一 個usage原封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個 usage原封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原 封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:封 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封 不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封不 動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:動 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封不動 的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封不動的 複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封不動的複 製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封不動的複製 過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封不動的複製過 來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.116 將另一個usage原封不動的複製過來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給 定argc, argv, 將各參數設置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給定 argc, argv, 將各參數設置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給定argc, argv, 將 各參數設置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:各 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給定argc, argv, 將各 參數設置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給定argc, argv, 將各參 數設置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給定argc, argv, 將各參數 設置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給定argc, argv, 將各參數設 置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.134 給定argc, argv, 將各參數設置 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 \mbox{\tt out} & {\em errmsg} & 將 錯誤訊息寫到這裡 (若給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:錯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 \mbox{\tt out} & {\em errmsg} & 將錯 誤訊息寫到這裡 (若給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:誤 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 \mbox{\tt out} & {\em errmsg} & 將錯誤 訊息寫到這裡 (若給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...x{\tt out} & {\em errmsg} & 將錯誤訊 息寫到這裡 (若給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:息 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...tt out} & {\em errmsg} & 將錯誤訊息 寫到這裡 (若給定\-N... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...out} & {\em errmsg} & 將錯誤訊息寫 到這裡 (若給定\-N\-U... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...} & {\em errmsg} & 將錯誤訊息寫到 這裡 (若給定\-N\-U\-L... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...& {\em errmsg} & 將錯誤訊息寫到這 裡 (若給定\-N\-U\-L\-L... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...\em errmsg} & 將錯誤訊息寫到這裡 (若給定\-N\-U\-L\-L po... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...rrmsg} & 將錯誤訊息寫到這裡 (若 給定\-N\-U\-L\-L pointer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...sg} & 將錯誤訊息寫到這裡 (若給 定\-N\-U\-L\-L pointer, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ... & 將錯誤訊息寫到這裡 (若給定 \-N\-U\-L\-L pointer, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...裡 (若給定\-N\-U\-L\-L pointer, 則 會把錯誤訊息忽略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ... (若給定\-N\-U\-L\-L pointer, 則會 把錯誤訊息忽略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...(若給定\-N\-U\-L\-L pointer, 則會把 錯誤訊息忽略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:錯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...給定\-N\-U\-L\-L pointer, 則會把錯 誤訊息忽略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:誤 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...定\-N\-U\-L\-L pointer, 則會把錯誤 訊息忽略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...\-N\-U\-L\-L pointer, 則會把錯誤訊 息忽略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:息 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...N\-U\-L\-L pointer, 則會把錯誤訊息 忽略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忽 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...U\-L\-L pointer, 則會把錯誤訊息忽 略) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:略 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.140 ...L\-L pointer, 則會把錯誤訊息忽略 ) \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 143 [][][] [] ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 {\ttfamily true/false} {\bfseries 成 功與否} (否的話代表有錯... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 {\ttfamily true/false} {\bfseries 成功 與否} (否的話代表有錯... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:與 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 {\ttfamily true/false} {\bfseries 成功與 否} (否的話代表有錯... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...amily true/false} {\bfseries 成功與否 } (否的話代表有錯... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...true/false} {\bfseries 成功與否} (否 的話代表有錯誤的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...e/false} {\bfseries 成功與否} (否的 話代表有錯誤的設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:話 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...alse} {\bfseries 成功與否} (否的話 代表有錯誤的設定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...e} {\bfseries 成功與否} (否的話代 表有錯誤的設定值... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...{\bfseries 成功與否} (否的話代表 有錯誤的設定值在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...fseries 成功與否} (否的話代表有 錯誤的設定值在其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:錯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...ries 成功與否} (否的話代表有錯 誤的設定值在其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:誤 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...s 成功與否} (否的話代表有錯誤 的設定值在其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...功與否} (否的話代表有錯誤的 設定值在其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...與否} (否的話代表有錯誤的設 定值在其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...否} (否的話代表有錯誤的設定 值在其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...} (否的話代表有錯誤的設定值 在其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ... (否的話代表有錯誤的設定值在 其中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...的話代表有錯誤的設定值在其 中) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.144 ...話代表有錯誤的設定值在其中 ) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回 傳是否有設定此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳 是否有設定此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是 否有設定此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是否 有設定此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是否有 設定此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是否有設 定此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是否有設定 此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是否有設定此 選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是否有設定此選 項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.159 回傳是否有設定此選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 \mbox{\tt in} & {\em opt} & 指 定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 \mbox{\tt in} & {\em opt} & 指定 字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 \mbox{\tt in} & {\em opt} & 指定字 符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.163 \mbox{\tt in} & {\em opt} & 指定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 166 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 {\ttfamily true/false} 表 {\bfseries 是否有設定此選項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 {\ttfamily true/false} 表 {\bfseries 是 否有設定此選項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 {\ttfamily true/false} 表 {\bfseries 是否 有設定此選項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 ...mily true/false} 表 {\bfseries 是否有 設定此選項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 ...y true/false} 表 {\bfseries 是否有設 定此選項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 ...rue/false} 表 {\bfseries 是否有設定 此選項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 .../false} 表 {\bfseries 是否有設定此 選項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 ...lse} 表 {\bfseries 是否有設定此選 項} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.167 ...} 表 {\bfseries 是否有設定此選項 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將 另一個usage的設置匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另 一個usage的設置匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另一 個usage的設置匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另一個 usage的設置匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另一個usage的 設置匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另一個usage的設 置匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另一個usage的設置 匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:匯 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另一個usage的設置匯 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.182 將另一個usage的設置匯入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.186 \mbox{\tt in} & {\em usage} & 另 一個usage \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.186 \mbox{\tt in} & {\em usage} & 另一 個usage \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.186 \mbox{\tt in} & {\em usage} & 另一個 usage \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 189 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 {\ttfamily true/false} 表 示 {\bfseries 是否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:示 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 {\ttfamily true/false} 表示 {\bfseries 是否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 {\ttfamily true/false} 表示 {\bfseries 是 否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 ...mily true/false} 表示 {\bfseries 是否 成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 ...y true/false} 表示 {\bfseries 是否成 功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.190 ...rue/false} 表示 {\bfseries 是否成功 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新 增一個沒有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增 一個沒有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一 個沒有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個 沒有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒 有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有 額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有額 外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有額外 選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有額外選 項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有額外選項 的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有額外選項的 選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有額外選項的選 項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.206 新增一個沒有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. [196] ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 \mbox{\tt in} & {\em opt} & 指 定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 \mbox{\tt in} & {\em opt} & 指定 字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 \mbox{\tt in} & {\em opt} & 指定字 符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.210 \mbox{\tt in} & {\em opt} & 指定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 \mbox{\tt in} & {\em des} & 即 description, 用來解釋這個選項... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...tt in} & {\em des} & 即description, 用 來解釋這個選項的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...in} & {\em des} & 即description, 用來 解釋這個選項的意... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ... & {\em des} & 即description, 用來解 釋這個選項的意義... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:釋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ... {\em des} & 即description, 用來解釋 這個選項的意義用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...em des} & 即description, 用來解釋這 個選項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...des} & 即description, 用來解釋這個 選項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...} & 即description, 用來解釋這個選 項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ... 即description, 用來解釋這個選項 的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...description, 用來解釋這個選項的 意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:意 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...scription, 用來解釋這個選項的意 義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...iption, 用來解釋這個選項的意義 用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ...ion, 用來解釋這個選項的意義用 的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.212 ..., 用來解釋這個選項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 215 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.216 {\ttfamily true/false} 表 {\bfseries 是否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.216 {\ttfamily true/false} 表 {\bfseries 是 否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.216 {\ttfamily true/false} 表 {\bfseries 是否 成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.216 ...mily true/false} 表 {\bfseries 是否成 功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.216 ...y true/false} 表 {\bfseries 是否成功 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新 增一個有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增 一個有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一 個有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個 有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有 額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有額 外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有額外 選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有額外選 項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有額外選項 的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有額外選項的 選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有額外選項的選 項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.235 新增一個有額外選項的選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.239 \mbox{\tt in} & {\em opt} & 指 定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.239 \mbox{\tt in} & {\em opt} & 指定 字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.239 \mbox{\tt in} & {\em opt} & 指定字 符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.239 \mbox{\tt in} & {\em opt} & 指定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 \mbox{\tt in} & {\em des} & 即 description, 用來解釋這個選項... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...tt in} & {\em des} & 即description, 用 來解釋這個選項的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...in} & {\em des} & 即description, 用來 解釋這個選項的意... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ... & {\em des} & 即description, 用來解 釋這個選項的意義... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:釋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ... {\em des} & 即description, 用來解釋 這個選項的意義用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...em des} & 即description, 用來解釋這 個選項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...des} & 即description, 用來解釋這個 選項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...} & 即description, 用來解釋這個選 項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ... 即description, 用來解釋這個選項 的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...description, 用來解釋這個選項的 意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:意 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...scription, 用來解釋這個選項的意 義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...iption, 用來解釋這個選項的意義 用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ...ion, 用來解釋這個選項的意義用 的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 ..., 用來解釋這個選項的意義用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 \mbox{\tt in} & {\em val\-\_\-type} & 表 示額外選項的型態, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:示 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...x{\tt in} & {\em val\-\_\-type} & 表示 額外選項的型態, 寫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...tt in} & {\em val\-\_\-type} & 表示額 外選項的型態, 寫在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...in} & {\em val\-\_\-type} & 表示額外 選項的型態, 寫在\-U... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ... & {\em val\-\_\-type} & 表示額外選 項的型態, 寫在\-U\-S... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ... {\em val\-\_\-type} & 表示額外選項 的型態, 寫在\-U\-S\-A... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...em val\-\_\-type} & 表示額外選項的 型態, 寫在\-U\-S\-A\-G... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...val\-\_\-type} & 表示額外選項的型 態, 寫在\-U\-S\-A\-G\-E... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:態 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...\-\_\-type} & 表示額外選項的型態 , 寫在\-U\-S\-A\-G\-E裡... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...-type} & 表示額外選項的型態, 寫 在\-U\-S\-A\-G\-E裡面... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...pe} & 表示額外選項的型態, 寫在 \-U\-S\-A\-G\-E裡面給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...選項的型態, 寫在\-U\-S\-A\-G\-E裡 面給人看用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:面 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...項的型態, 寫在\-U\-S\-A\-G\-E裡面 給人看用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...的型態, 寫在\-U\-S\-A\-G\-E裡面給 人看用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:人 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...型態, 寫在\-U\-S\-A\-G\-E裡面給人 看用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:看 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...態, 寫在\-U\-S\-A\-G\-E裡面給人看 用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ..., 寫在\-U\-S\-A\-G\-E裡面給人看用 的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.243 ...在\-U\-S\-A\-G\-E裡面給人看用的 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...x{\tt in} & {\em val\-\_\-default} & 預 設值, 若為空字串則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...tt in} & {\em val\-\_\-default} & 預設 值, 若為空字串則當... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...in} & {\em val\-\_\-default} & 預設值 , 若為空字串則當作... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...& {\em val\-\_\-default} & 預設值, 若 為空字串則當作沒... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...\em val\-\_\-default} & 預設值, 若為 空字串則當作沒有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ... val\-\_\-default} & 預設值, 若為空 字串則當作沒有預... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...l\-\_\-default} & 預設值, 若為空字 串則當作沒有預設... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...\_\-default} & 預設值, 若為空字串 則當作沒有預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...-default} & 預設值, 若為空字串則 當作沒有預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...fault} & 預設值, 若為空字串則當 作沒有預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...lt} & 預設值, 若為空字串則當作 沒有預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ... & 預設值, 若為空字串則當作沒 有預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...預設值, 若為空字串則當作沒有 預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:預 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...設值, 若為空字串則當作沒有預 設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ...值, 若為空字串則當作沒有預設 值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.245 ..., 若為空字串則當作沒有預設值 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 \mbox{\tt in} & {\em must} & 表 示是否一定要設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:示 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 \mbox{\tt in} & {\em must} & 表示 是否一定要設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 \mbox{\tt in} & {\em must} & 表示是 否一定要設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 \mbox{\tt in} & {\em must} & 表示是否 一定要設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ...x{\tt in} & {\em must} & 表示是否一 定要設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ...tt in} & {\em must} & 表示是否一定 要設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ...in} & {\em must} & 表示是否一定要 設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ... & {\em must} & 表示是否一定要設 定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.247 ... {\em must} & 表示是否一定要設定 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 250 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 {\ttfamily true/false} 表 {\bfseries 是否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 {\ttfamily true/false} 表 {\bfseries 是 否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 {\ttfamily true/false} 表 {\bfseries 是否 成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...mily true/false} 表 {\bfseries 是否成 功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.251 ...y true/false} 表 {\bfseries 是否成功 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 回 傳參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 回傳 參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 回傳參 數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 回傳參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 回傳參數 {\bfseries -\/}(opt) 的 第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 回傳參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...es -\/}(opt) 的第 {\bfseries index} 個 額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...-\/}(opt) 的第 {\bfseries index} 個額 外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...}(opt) 的第 {\bfseries index} 個額外 選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ...pt) 的第 {\bfseries index} 個額外選 項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 ... 的第 {\bfseries index} 個額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.271 \mbox{\tt in} & {\em opt} & 指 定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.271 \mbox{\tt in} & {\em opt} & 指定 字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.271 \mbox{\tt in} & {\em opt} & 指定字 符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.271 \mbox{\tt in} & {\em opt} & 指定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 \mbox{\tt in} & {\em index} & 第 幾個 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 \mbox{\tt in} & {\em index} & 第幾 個 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 \mbox{\tt in} & {\em index} & 第幾個 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 276 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 回 傳參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 回傳 參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 回傳參 數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 回傳參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 回傳參數 {\bfseries -\/}(opt) 的 第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 回傳參數 {\bfseries -\/}(opt) 的第 {\bfseries index} 個額外... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ...es -\/}(opt) 的第 {\bfseries index} 個 額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ...-\/}(opt) 的第 {\bfseries index} 個額 外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ...}(opt) 的第 {\bfseries index} 個額外 選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ...pt) 的第 {\bfseries index} 個額外選 項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.277 ... 的第 {\bfseries index} 個額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:針 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針 對-\/(opt)新增一個可接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對 -\/(opt)新增一個可接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新 增一個可接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增 一個可接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一 個可接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一個 可接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一個可 接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一個可接 受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:受 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一個可接受 的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一個可接受的 額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一個可接受的額 外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 針對-\/(opt)新增一個可接受的額外 選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 ...-\/(opt)新增一個可接受的額外選 項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.294 ...(opt)新增一個可接受的額外選項 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.298 \mbox{\tt in} & {\em opt} & 指 定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.298 \mbox{\tt in} & {\em opt} & 指定 字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.298 \mbox{\tt in} & {\em opt} & 指定字 符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.298 \mbox{\tt in} & {\em opt} & 指定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.300 \mbox{\tt in} & {\em val} & 額 外選項 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.300 \mbox{\tt in} & {\em val} & 額外 選項 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.300 \mbox{\tt in} & {\em val} & 額外選 項 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.300 \mbox{\tt in} & {\em val} & 額外選項 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:關 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 \mbox{\tt in} & {\em des} & 關 於此額外選項的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 \mbox{\tt in} & {\em des} & 關於 此額外選項的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 \mbox{\tt in} & {\em des} & 關於此 額外選項的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:額 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 \mbox{\tt in} & {\em des} & 關於此額 外選項的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 \mbox{\tt in} & {\em des} & 關於此額外 選項的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 ...\tt in} & {\em des} & 關於此額外選 項的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 ... in} & {\em des} & 關於此額外選項 的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 ...} & {\em des} & 關於此額外選項的 說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 ...& {\em des} & 關於此額外選項的說 明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:明 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.302 ...\em des} & 關於此額外選項的說明 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 305 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 {\ttfamily true/false} 表 {\bfseries 是否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 {\ttfamily true/false} 表 {\bfseries 是 否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 {\ttfamily true/false} 表 {\bfseries 是否 成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 ...mily true/false} 表 {\bfseries 是否成 功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.306 ...y true/false} 表 {\bfseries 是否成功 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 回 傳參數 {\bfseries -\/}(opt) 被設置幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 回傳 參數 {\bfseries -\/}(opt) 被設置幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 回傳參 數 {\bfseries -\/}(opt) 被設置幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 回傳參數 {\bfseries -\/}(opt) 被設置幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 回傳參數 {\bfseries -\/}(opt) 被 設置幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 回傳參數 {\bfseries -\/}(opt) 被設 置幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 回傳參數 {\bfseries -\/}(opt) 被設置 幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 ...參數 {\bfseries -\/}(opt) 被設置幾 次 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.321 ...數 {\bfseries -\/}(opt) 被設置幾次 Your command was ignored. Type I to replace it with another command, or to continue without it. [197] ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 \mbox{\tt in} & {\em opt} & 指 定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 \mbox{\tt in} & {\em opt} & 指定 字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 \mbox{\tt in} & {\em opt} & 指定字 符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.325 \mbox{\tt in} & {\em opt} & 指定字符 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 328 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 回 傳次數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 回傳 次數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 回傳次 數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 回傳次數 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 取 得第i個process argument Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 取得 第i個process argument Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 取得第 i個process argument Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.344 取得第i個 process argument Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 \mbox{\tt in} & {\em index} & 第 幾個 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 \mbox{\tt in} & {\em index} & 第幾 個 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 \mbox{\tt in} & {\em index} & 第幾個 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 351 [][][] [] ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 回 傳第 {\itshape index} 個 {\bfseries process} {\bfseries argument} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 回傳 第 {\itshape index} 個 {\bfseries process} {\bfseries argument} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 回傳第 {\itshape index} 個 {\bfseries process} {\bfseries argument} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.352 回傳第 {\itshape index} 個 {\bfseries process} {\bfseries argument} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 取 得process arguments array Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.367 取得 process arguments array Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 369 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 一 個 {\ttfamily std\-::vector} , 包含所有 {\bfseries Process} {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 一個 {\ttfamily std\-::vector} , 包含所有 {\bfseries Process} {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 一個 {\ttfamily std\-::vector} , 包 含所有 {\bfseries Process} {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 一個 {\ttfamily std\-::vector} , 包含 所有 {\bfseries Process} {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 一個 {\ttfamily std\-::vector} , 包含所 有 {\bfseries Process} {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 ... {\ttfamily std\-::vector} , 包含所有 {\bfseries Process} {\bfs... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.385 取 得有幾個process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.385 取得 有幾個process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.385 取得有 幾個process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.385 取得有幾 個process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.385 取得有幾個 process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 387 [][][] [] ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.388 有 幾個process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.388 有幾 個process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.388 有幾個 process arguments Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將 另一個usage的選項設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另 一個usage的選項設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一 個usage的選項設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個 usage的選項設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的 選項設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的選 項設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的選項 設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的選項設 置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的選項設置 加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的選項設置加 進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:進 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的選項設置加進 來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.403 將另一個usage的選項設置加進來 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 \mbox{\tt in} & {\em usage} & 另 一個usage \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 \mbox{\tt in} & {\em usage} & 另一 個usage \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.407 \mbox{\tt in} & {\em usage} & 另一個 usage \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 410 [][][] [] ! Package inputenc Error: Unicode char \u8:表 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 {\ttfamily true/false} 表 {\bfseries 是否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 {\ttfamily true/false} 表 {\bfseries 是 否成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 {\ttfamily true/false} 表 {\bfseries 是否 成功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...mily true/false} 表 {\bfseries 是否成 功} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.411 ...y true/false} 表 {\bfseries 是否成功 } Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 回 傳usage string Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.426 回傳 usage string Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 428 [][][] [] ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新 增一段usage document於每個選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增 一段usage document於每個選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一 段usage document於每個選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一段 usage document於每個選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一段usage document於 每個選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一段usage document於每 個選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一段usage document於每個 選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一段usage document於每個選 項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一段usage document於每個選項 逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:逐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 新增一段usage document於每個選項逐 條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:條 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 ...一段usage document於每個選項逐條 說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 ...段usage document於每個選項逐條說 明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:明 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 ...usage document於每個選項逐條說明 之前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 ...ge document於每個選項逐條說明之 前 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.444 ...document於每個選項逐條說明之前 Your command was ignored. Type I to replace it with another command, or to continue without it. [198] ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.448 \mbox{\tt in} & {\em des} & 要 新增的usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.448 \mbox{\tt in} & {\em des} & 要新 增的usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.448 \mbox{\tt in} & {\em des} & 要新增 的usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.448 \mbox{\tt in} & {\em des} & 要新增的 usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新 增一段usage document於每個選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增 一段usage document於每個選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一 段usage document於每個選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一段 usage document於每個選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一段usage document於 每個選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一段usage document於每 個選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一段usage document於每個 選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一段usage document於每個選 項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:項 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一段usage document於每個選項 逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:逐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 新增一段usage document於每個選項逐 條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:條 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 ...一段usage document於每個選項逐條 說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:說 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 ...段usage document於每個選項逐條說 明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:明 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 ...usage document於每個選項逐條說明 之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 ...ge document於每個選項逐條說明之 後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.464 ...document於每個選項逐條說明之後 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 \mbox{\tt in} & {\em des} & 要 新增的usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 \mbox{\tt in} & {\em des} & 要新 增的usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:增 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 \mbox{\tt in} & {\em des} & 要新增 的usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 \mbox{\tt in} & {\em des} & 要新增的 usage document \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1Vector.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [199] [200] Underfull \hbox (badness 10000) detected at line 104 [][][] [] [201] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 243. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 243. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 243. Underfull \hbox (badness 10000) detected at line 319 [][][] [] [202] [203] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 561. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 561. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 561. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 576. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 576. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 576. [204] Underfull \hbox (badness 10000) detected at line 747 [][][] [] ) (./classmeow_1_1Vector2D.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [205] [206] Underfull \hbox (badness 10000) detected at line 131 [][][] [] [207] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 239. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 239. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 239. [208] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 535. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 535. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 535. [209] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 546. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 546. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 546. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 557. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 557. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 557. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 667. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 667. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 667. [210] [211]) (./classmeow_1_1Vector3D.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [212] [213] Underfull \hbox (badness 10000) detected at line 135 [][][] [] [214] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 244. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 244. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 244. [215] [216] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 556. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 556. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 556. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 567. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 567. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 567. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 578. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 578. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 578. [217] [218]) (./classmeow_1_1ViewPort.tex ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 未 完待續 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 未完 待續 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:待 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 未完待 續 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:續 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 未完待續 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1ViewPort.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1ViewPort.pdf used on input line 16. (pdftex.def) Requested size: 77.52943pt x 56.9055pt. ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 未 完待續 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 未完 待續 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:待 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 未完待 續 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:續 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 未完待續 Your command was ignored. Type I to replace it with another command, or to continue without it. [219 <./classmeow_1_1ViewPort.pdf>]) (./classmeow_1_1VP__Tree.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 跟 \-K\-D\-\_\-\-Tree很像歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:很 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 跟\-K\-D\-\_\-\-Tree很 像歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 跟\-K\-D\-\_\-\-Tree很像 歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:歐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 跟\-K\-D\-\_\-\-Tree很像歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...ompactList}\small\item\em constructor, 複 製資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...actList}\small\item\em constructor, 複製 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...List}\small\item\em constructor, 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...t}\small\item\em constructor, 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...ompactList}\small\item\em constructor, 給 定dimension \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...actList}\small\item\em constructor, 給定 dimension \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 將 給定的\-Vector加到set中 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 將給 定的\-Vector加到set中 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...n{DoxyCompactList}\small\item\em 將給定 的\-Vector加到set中 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...oxyCompactList}\small\item\em 將給定的 \-Vector加到set中 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...ist}\small\item\em 將給定的\-Vector加 到set中 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...}\small\item\em 將給定的\-Vector加到 set中 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...l\item\em 將給定的\-Vector加到set中 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 將 給定的\-Vector從set移除 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 \begin{DoxyCompactList}\small\item\em 將給 定的\-Vector從set移除 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...n{DoxyCompactList}\small\item\em 將給定 的\-Vector從set移除 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...oxyCompactList}\small\item\em 將給定的 \-Vector從set移除 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...ist}\small\item\em 將給定的\-Vector從 set移除 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...mall\item\em 將給定的\-Vector從set移 除 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.34 ...l\item\em 將給定的\-Vector從set移除 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 檢 查至今是否有 insert/eras... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 檢查 至今是否有 insert/eras... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...n{DoxyCompactList}\small\item\em 檢查至 今是否有 insert/erase ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:今 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...oxyCompactList}\small\item\em 檢查至今 是否有 insert/erase 被... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...CompactList}\small\item\em 檢查至今是 否有 insert/erase 被呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...pactList}\small\item\em 檢查至今是否 有 insert/erase 被呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...tList}\small\item\em 檢查至今是否有 insert/erase 被呼叫來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...\em 檢查至今是否有 insert/erase 被 呼叫來決定是否 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ... 檢查至今是否有 insert/erase 被呼 叫來決定是否 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...查至今是否有 insert/erase 被呼叫 來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...至今是否有 insert/erase 被呼叫來 決定是否 {\ttfamily re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...今是否有 insert/erase 被呼叫來決 定是否 {\ttfamily rebui... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...是否有 insert/erase 被呼叫來決定 是否 {\ttfamily rebuild(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...否有 insert/erase 被呼叫來決定是 否 {\ttfamily rebuild()} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...有 insert/erase 被呼叫來決定是否 {\ttfamily rebuild()} \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 重 新建樹 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 重新 建樹 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:建 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...n{DoxyCompactList}\small\item\em 重新建 樹 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...oxyCompactList}\small\item\em 重新建樹 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 查 找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 查找 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 清 空所有資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 清空 所有資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...n{DoxyCompactList}\small\item\em 清空所 有資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...oxyCompactList}\small\item\em 清空所有 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...CompactList}\small\item\em 清空所有資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...pactList}\small\item\em 清空所有資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 清 空所有資料並重新給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 清空 所有資料並重新給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...n{DoxyCompactList}\small\item\em 清空所 有資料並重新給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...oxyCompactList}\small\item\em 清空所有 資料並重新給定維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...CompactList}\small\item\em 清空所有資 料並重新給定維度 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...pactList}\small\item\em 清空所有資料 並重新給定維度 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...tList}\small\item\em 清空所有資料並 重新給定維度 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...st}\small\item\em 清空所有資料並重 新給定維度 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\small\item\em 清空所有資料並重新 給定維度 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...all\item\em 清空所有資料並重新給 定維度 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\item\em 清空所有資料並重新給定 維度 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...em\em 清空所有資料並重新給定維 度 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...em 清空所有資料並重新給定維度 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 跟 \-K\-D\-\_\-\-Tree很像歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:很 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 跟\-K\-D\-\_\-\-Tree很 像歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 跟\-K\-D\-\_\-\-Tree很像 歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:歐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.52 跟\-K\-D\-\_\-\-Tree很像歐 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ssmeow_1_1VP__Tree}{V\-P\-\_\-\-Tree}} 用 來維護由 {\bfseries N... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...eow_1_1VP__Tree}{V\-P\-\_\-\-Tree}} 用來 維護由 {\bfseries N個\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ..._1_1VP__Tree}{V\-P\-\_\-\-Tree}} 用來維 護由 {\bfseries N個\-K... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...1VP__Tree}{V\-P\-\_\-\-Tree}} 用來維護 由 {\bfseries N個\-K維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...__Tree}{V\-P\-\_\-\-Tree}} 用來維護由 {\bfseries N個\-K維度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...\-\-Tree}} 用來維護由 {\bfseries N個 \-K維度向量所成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ee}} 用來維護由 {\bfseries N個\-K維 度向量所成的集合} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...} 用來維護由 {\bfseries N個\-K維度 向量所成的集合} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...來維護由 {\bfseries N個\-K維度向 量所成的集合} , 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...維護由 {\bfseries N個\-K維度向量 所成的集合} , 並可... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...護由 {\bfseries N個\-K維度向量所 成的集合} , 並可於... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...由 {\bfseries N個\-K維度向量所成 的集合} , 並可於該s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ... {\bfseries N個\-K維度向量所成的 集合} , 並可於該set... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...{\bfseries N個\-K維度向量所成的集 合} , 並可於該set中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...fseries N個\-K維度向量所成的集合 } , 並可於該set中查... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ... N個\-K維度向量所成的集合} , 並 可於該set中查找 {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:可 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...\-K維度向量所成的集合} , 並可 於該set中查找 {\bfser... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...-K維度向量所成的集合} , 並可於 該set中查找 {\bfseries... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:該 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...度向量所成的集合} , 並可於該 set中查找 {\bfseries ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...量所成的集合} , 並可於該set中 查找 {\bfseries 前i個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...所成的集合} , 並可於該set中查 找 {\bfseries 前i個離... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...成的集合} , 並可於該set中查找 {\bfseries 前i個離給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ... , 並可於該set中查找 {\bfseries 前 i個離給定向量最接... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...可於該set中查找 {\bfseries 前i個 離給定向量最接近... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...於該set中查找 {\bfseries 前i個離 給定向量最接近的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...該set中查找 {\bfseries 前i個離給 定向量最接近的向... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...set中查找 {\bfseries 前i個離給定 向量最接近的向量$\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...et中查找 {\bfseries 前i個離給定向 量最接近的向量$\ast... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...查找 {\bfseries 前i個離給定向量 最接近的向量$\ast$} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...找 {\bfseries 前i個離給定向量最 接近的向量$\ast$} . ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ... {\bfseries 前i個離給定向量最接 近的向量$\ast$} . 不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...{\bfseries 前i個離給定向量最接近 的向量$\ast$} . 不像 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...fseries 前i個離給定向量最接近的 向量$\ast$} . 不像 {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ries 前i個離給定向量最接近的向 量$\ast$} . 不像 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...s 前i個離給定向量最接近的向量 $\ast$} . 不像 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...定向量最接近的向量$\ast$} . 不 像 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...向量最接近的向量$\ast$} . 不像 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ssmeow_1_1KD__Tree}{K\-D\-\_\-\-Tree}} 二 分樹每次都選擇一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...eow_1_1KD__Tree}{K\-D\-\_\-\-Tree}} 二分 樹每次都選擇一個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ..._1_1KD__Tree}{K\-D\-\_\-\-Tree}} 二分樹 每次都選擇一個維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...1KD__Tree}{K\-D\-\_\-\-Tree}} 二分樹每 次都選擇一個維度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...__Tree}{K\-D\-\_\-\-Tree}} 二分樹每次 都選擇一個維度去... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ree}{K\-D\-\_\-\-Tree}} 二分樹每次都 選擇一個維度去分, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...}{K\-D\-\_\-\-Tree}} 二分樹每次都選 擇一個維度去分, 分... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擇 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...\-D\-\_\-\-Tree}} 二分樹每次都選擇 一個維度去分, 分成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...\-\_\-\-Tree}} 二分樹每次都選擇一 個維度去分, 分成小... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ..._\-\-Tree}} 二分樹每次都選擇一個 維度去分, 分成小的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...\-Tree}} 二分樹每次都選擇一個維 度去分, 分成小的跟... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ree}} 二分樹每次都選擇一個維度 去分, 分成小的跟大... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:去 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...}} 二分樹每次都選擇一個維度去 分, 分成小的跟大的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...二分樹每次都選擇一個維度去分 , 分成小的跟大的, {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...樹每次都選擇一個維度去分, 分 成小的跟大的, {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...每次都選擇一個維度去分, 分成 小的跟大的, {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...次都選擇一個維度去分, 分成小 的跟大的, {\ttfamily \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...都選擇一個維度去分, 分成小的 跟大的, {\ttfamily \hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...選擇一個維度去分, 分成小的跟 大的, {\ttfamily \hyperl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...擇一個維度去分, 分成小的跟大 的, {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...一個維度去分, 分成小的跟大的 , {\ttfamily \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ssmeow_1_1VP__Tree}{V\-P\-\_\-\-Tree}} 每 次選一個點, 將資料... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...eow_1_1VP__Tree}{V\-P\-\_\-\-Tree}} 每次 選一個點, 將資料分... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ..._1_1VP__Tree}{V\-P\-\_\-\-Tree}} 每次選 一個點, 將資料分成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...1VP__Tree}{V\-P\-\_\-\-Tree}} 每次選一 個點, 將資料分成 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...__Tree}{V\-P\-\_\-\-Tree}} 每次選一個 點, 將資料分成 離... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...ree}{V\-P\-\_\-\-Tree}} 每次選一個點 , 將資料分成 離這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...V\-P\-\_\-\-Tree}} 每次選一個點, 將 資料分成 離這個點... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...P\-\_\-\-Tree}} 每次選一個點, 將資 料分成 離這個點近... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...\_\-\-Tree}} 每次選一個點, 將資料 分成 離這個點近的,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...-\-Tree}} 每次選一個點, 將資料分 成 離這個點近的, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...Tree}} 每次選一個點, 將資料分成 離這個點近的, 跟... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...}} 每次選一個點, 將資料分成 離 這個點近的, 跟離這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...每次選一個點, 將資料分成 離這 個點近的, 跟離這個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...次選一個點, 將資料分成 離這個 點近的, 跟離這個點... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...選一個點, 將資料分成 離這個點 近的, 跟離這個點遠... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...一個點, 將資料分成 離這個點近 的, 跟離這個點遠的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...個點, 將資料分成 離這個點近的 , 跟離這個點遠的. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ..., 將資料分成 離這個點近的, 跟 離這個點遠的. 至於... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...將資料分成 離這個點近的, 跟離 這個點遠的. 至於怎... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...資料分成 離這個點近的, 跟離這 個點遠的. 至於怎麼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...料分成 離這個點近的, 跟離這個 點遠的. 至於怎麼選... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...分成 離這個點近的, 跟離這個點 遠的. 至於怎麼選呢... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:遠 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...成 離這個點近的, 跟離這個點遠 的. 至於怎麼選呢...... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ... 離這個點近的, 跟離這個點遠的 . 至於怎麼選呢...., ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...個點近的, 跟離這個點遠的. 至 於怎麼選呢...., 嘛... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...點近的, 跟離這個點遠的. 至於 怎麼選呢...., 嘛還... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:怎 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...近的, 跟離這個點遠的. 至於怎 麼選呢...., 嘛還沒... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:麼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...的, 跟離這個點遠的. 至於怎麼 選呢...., 嘛還沒研... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ..., 跟離這個點遠的. 至於怎麼選 呢...., 嘛還沒研究, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ... 跟離這個點遠的. 至於怎麼選呢 ...., 嘛還沒研究, 先... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:嘛 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...個點遠的. 至於怎麼選呢...., 嘛 還沒研究, 先random Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:還 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...點遠的. 至於怎麼選呢...., 嘛還 沒研究, 先random Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:沒 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...遠的. 至於怎麼選呢...., 嘛還沒 研究, 先random Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:研 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...的. 至於怎麼選呢...., 嘛還沒研 究, 先random Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:究 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 .... 至於怎麼選呢...., 嘛還沒研究 , 先random Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:先 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.54 ...於怎麼選呢...., 嘛還沒研究, 先 random Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 參 考資料連結\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:考 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 參考 資料連結\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 參考資 料連結\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 參考資料 連結\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:連 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 參考資料連 結\-: Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.56 參考資料連結 \-: Your command was ignored. Type I to replace it with another command, or to continue without it. [220] [221] ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...{\ttfamily n}) &\PBS\centering Scalar &取 得第{\ttfamily n} 維度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...tfamily n}) &\PBS\centering Scalar &取得 第{\ttfamily n} 維度量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...mily n}) &\PBS\centering Scalar &取得第 {\ttfamily n} 維度量 \\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...ntering Scalar &取得第{\ttfamily n} 維 度量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...ring Scalar &取得第{\ttfamily n} 維度 量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...g Scalar &取得第{\ttfamily n} 維度量 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:權 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...} {\ttfamily v}) &\PBS\centering bool &權 重比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...\ttfamily v}) &\PBS\centering bool &權重 比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...family v}) &\PBS\centering bool &權重比 較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...ily v}) &\PBS\centering bool &權重比較 \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:建 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...{\ttfamily n}) &\PBS\centering Scalar &建 構子, \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...tfamily n}) &\PBS\centering Scalar &建構 子, \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:子 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 ...mily n}) &\PBS\centering Scalar &建構子 , \\\cline{1-6} Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) in alignment at lines 64--71 [][][][][][] [] ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 其 中一定{\ttfamily n=0or4} $\vert$ $\vert$const $\vert$ Scalar$\ver... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 其中 一定{\ttfamily n=0or4} $\vert$ $\vert$const $\vert$ Scalar$\ver... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 其中一 定{\ttfamily n=0or4} $\vert$ $\vert$const $\vert$ Scalar$\ver... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 其中一定 {\ttfamily n=0or4} $\vert$ $\vert$const $\vert$ Scalar$\ver... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ... {\ttfamily s}) $\vert$ Scalar $\vert$ 相 乘 $\vert$ $\vert$const $... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乘 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...ttfamily s}) $\vert$ Scalar $\vert$ 相乘 $\vert$ $\vert$const $\ve... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ... {\ttfamily s}) $\vert$ Scalar $\vert$ 相 加 $\vert$ $\vert$const $... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...ttfamily s}) $\vert$ Scalar $\vert$ 相加 $\vert$ $\vert$const $\ve... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ... {\ttfamily s}) $\vert$ Scalar $\vert$ 相 差 $\vert$ $\vert$const $... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...ttfamily s}) $\vert$ Scalar $\vert$ 相差 $\vert$ $\vert$const $\ve... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...r-\/ $\vert$( ) $\vert$ Scalar $\vert$ 取 負號 $\vert$ $\vert$cons... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:負 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 .../ $\vert$( ) $\vert$ Scalar $\vert$ 取負 號 $\vert$ $\vert$const $... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...\vert$( ) $\vert$ Scalar $\vert$ 取負號 $\vert$ $\vert$const $\ve... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...ar {\ttfamily s}) $\vert$ bool $\vert$ 大 小比較 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...{\ttfamily s}) $\vert$ bool $\vert$ 大小 比較 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...tfamily s}) $\vert$ bool $\vert$ 大小比 較 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:較 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.72 ...mily s}) $\vert$ bool $\vert$ 大小比較 $\vert$ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 74 [][][] [] ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實 測結果發覺, 維度小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:測 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測 結果發覺, 維度小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結 果發覺, 維度小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果 發覺, 維度小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:發 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發 覺, 維度小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:覺 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發覺 , 維度小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發覺, 維 度小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發覺, 維度 小的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:小 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發覺, 維度小 的時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發覺, 維度小的 時候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發覺, 維度小的時 候, 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:候 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \-: -\/實測結果發覺, 維度小的時候 , 比起中規中矩的 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:比 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...測結果發覺, 維度小的時候, 比 起中規中矩的 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...結果發覺, 維度小的時候, 比起 中規中矩的 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...果發覺, 維度小的時候, 比起中 規中矩的 {\ttfamily \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:規 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...發覺, 維度小的時候, 比起中規 中矩的 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...覺, 維度小的時候, 比起中規中 矩的 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:矩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ..., 維度小的時候, 比起中規中矩 的 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ... 維度小的時候, 比起中規中矩的 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ssmeow_1_1VP__Tree}{V\-P\-\_\-\-Tree}} 有 {\bfseries random} 於其... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...P\-\_\-\-Tree}} 有 {\bfseries random} 於 其中, 因此時間複雜... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...\_\-\-Tree}} 有 {\bfseries random} 於其 中, 因此時間複雜度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...-\-Tree}} 有 {\bfseries random} 於其中 , 因此時間複雜度只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:因 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ee}} 有 {\bfseries random} 於其中, 因 此時間複雜度只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:此 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...} 有 {\bfseries random} 於其中, 因此 時間複雜度只是期... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ... {\bfseries random} 於其中, 因此時 間複雜度只是期望... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...{\bfseries random} 於其中, 因此時間 複雜度只是期望值 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...fseries random} 於其中, 因此時間複 雜度只是期望值 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:雜 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ries random} 於其中, 因此時間複雜 度只是期望值 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...s random} 於其中, 因此時間複雜度 只是期望值 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...andom} 於其中, 因此時間複雜度只 是期望值 {\ttfamily O(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...om} 於其中, 因此時間複雜度只是 期望值 {\ttfamily O(log... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:期 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ... 於其中, 因此時間複雜度只是期 望值 {\ttfamily O(log\-N... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:望 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...其中, 因此時間複雜度只是期望 值 {\ttfamily O(log\-N)} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...中, 因此時間複雜度只是期望值 {\ttfamily O(log\-N)} 但... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:但 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...只是期望值 {\ttfamily O(log\-N)} 但 是測資大到 一定程... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...是期望值 {\ttfamily O(log\-N)} 但是 測資大到 一定程度,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:測 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...期望值 {\ttfamily O(log\-N)} 但是測 資大到 一定程度, {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...望值 {\ttfamily O(log\-N)} 但是測資 大到 一定程度, {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...值 {\ttfamily O(log\-N)} 但是測資大 到 一定程度, {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ... {\ttfamily O(log\-N)} 但是測資大到 一定程度, {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ttfamily O(log\-N)} 但是測資大到 一 定程度, {\ttfamily \hyp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...amily O(log\-N)} 但是測資大到 一定 程度, {\ttfamily \hyperl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:程 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ly O(log\-N)} 但是測資大到 一定程 度, {\ttfamily \hyperlink... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...O(log\-N)} 但是測資大到 一定程度 , {\ttfamily \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:效 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ssmeow_1_1KD__Tree}{K\-D\-\_\-\-Tree}} 效 率會一整個大幅掉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:率 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...eow_1_1KD__Tree}{K\-D\-\_\-\-Tree}} 效率 會一整個大幅掉下, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ..._1_1KD__Tree}{K\-D\-\_\-\-Tree}} 效率會 一整個大幅掉下, 但... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...1KD__Tree}{K\-D\-\_\-\-Tree}} 效率會一 整個大幅掉下, 但 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:整 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...__Tree}{K\-D\-\_\-\-Tree}} 效率會一整 個大幅掉下, 但 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ree}{K\-D\-\_\-\-Tree}} 效率會一整個 大幅掉下, 但 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:大 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...}{K\-D\-\_\-\-Tree}} 效率會一整個大 幅掉下, 但 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幅 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...\-D\-\_\-\-Tree}} 效率會一整個大幅 掉下, 但 {\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:掉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...\-\_\-\-Tree}} 效率會一整個大幅掉 下, 但 {\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:下 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ..._\-\-Tree}} 效率會一整個大幅掉下 , 但 {\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:但 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...Tree}} 效率會一整個大幅掉下, 但 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ssmeow_1_1VP__Tree}{V\-P\-\_\-\-Tree}} 幾 乎不受影響 -\/\-T\-O\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乎 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...eow_1_1VP__Tree}{V\-P\-\_\-\-Tree}} 幾乎 不受影響 -\/\-T\-O\-D\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ..._1_1VP__Tree}{V\-P\-\_\-\-Tree}} 幾乎不 受影響 -\/\-T\-O\-D\-O ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:受 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...1VP__Tree}{V\-P\-\_\-\-Tree}} 幾乎不受 影響 -\/\-T\-O\-D\-O {\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:影 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...__Tree}{V\-P\-\_\-\-Tree}} 幾乎不受影 響 -\/\-T\-O\-D\-O {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:響 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...ree}{V\-P\-\_\-\-Tree}} 幾乎不受影響 -\/\-T\-O\-D\-O {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:算 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...15a7e6daa3edfba4201602c8894}{erase()}} 算 是未完成功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...7e6daa3edfba4201602c8894}{erase()}} 算是 未完成功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...daa3edfba4201602c8894}{erase()}} 算是未 完成功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...3edfba4201602c8894}{erase()}} 算是未完 成功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...fba4201602c8894}{erase()}} 算是未完成 功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...4201602c8894}{erase()}} 算是未完成功 能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...1602c8894}{erase()}} 算是未完成功能 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.118 constructor, 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.118 constructor, 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.118 constructor, 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.118 constructor, 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.133 constructor, 給 定dimension Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.133 constructor, 給定 dimension Your command was ignored. Type I to replace it with another command, or to continue without it. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 145. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 145. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 145. ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢 查至今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查 至今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:至 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至 今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:今 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至今 是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至今是 否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至今是否 有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至今是否有 insert/erase 被呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至今是否有 insert/erase 被 呼叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至今是否有 insert/erase 被呼 叫來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 檢查至今是否有 insert/erase 被呼叫 來決定是否 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...至今是否有 insert/erase 被呼叫來 決定是否 {\ttfamily re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...今是否有 insert/erase 被呼叫來決 定是否 {\ttfamily rebui... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...是否有 insert/erase 被呼叫來決定 是否 {\ttfamily rebuild()} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...否有 insert/erase 被呼叫來決定是 否 {\ttfamily rebuild()} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.166 ...有 insert/erase 被呼叫來決定是否 {\ttfamily rebuild()} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 清 空所有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 清空 所有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 清空所 有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 清空所有 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 清空所有資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.181 清空所有資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.196 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 將 給定的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 將給 定的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 將給定 的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 將給定的 \-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:從 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 將給定的\-Vector從 set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:移 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 將給定的\-Vector從set移 除 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.211 將給定的\-Vector從set移除 Your command was ignored. Type I to replace it with another command, or to continue without it. [222] ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 重 新建樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 重新 建樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:建 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 重新建 樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.226 重新建樹 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 將 給定的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 將給 定的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 將給定 的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 將給定的 \-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 將給定的\-Vector加 到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 將給定的\-Vector加到 set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.241 將給定的\-Vector加到set中 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 查 找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.273 查找 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於 set中找尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中 找尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:找 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找 尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尋 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋 距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋距 離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋距離 指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:指 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋距離指 定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋距離指定 向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋距離指定向 量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋距離指定向量 前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 於set中找尋距離指定向量前 {\ttfamily i} 近的向量, 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...距離指定向量前 {\ttfamily i} 近 的向量, 並依照由近... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...離指定向量前 {\ttfamily i} 近的 向量, 並依照由近而... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...指定向量前 {\ttfamily i} 近的向 量, 並依照由近而遠... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...定向量前 {\ttfamily i} 近的向量 , 並依照由近而遠的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...向量前 {\ttfamily i} 近的向量, 並 依照由近而遠的順... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...量前 {\ttfamily i} 近的向量, 並依 照由近而遠的順序... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...前 {\ttfamily i} 近的向量, 並依照 由近而遠的順序排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:由 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ... {\ttfamily i} 近的向量, 並依照由 近而遠的順序排序. ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:近 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...ttfamily i} 近的向量, 並依照由近 而遠的順序排序. 如... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:而 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...amily i} 近的向量, 並依照由近而 遠的順序排序. 如果... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:遠 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...ly i} 近的向量, 並依照由近而遠 的順序排序. 如果有... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...i} 近的向量, 並依照由近而遠的 順序排序. 如果有兩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:順 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...近的向量, 並依照由近而遠的順 序排序. 如果有兩個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...的向量, 並依照由近而遠的順序 排序. 如果有兩個向... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...向量, 並依照由近而遠的順序排 序. 如果有兩個向量... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...量, 並依照由近而遠的順序排序 . 如果有兩個向量{\t... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...並依照由近而遠的順序排序. 如 果有兩個向量{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...依照由近而遠的順序排序. 如果 有兩個向量{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...照由近而遠的順序排序. 如果有 兩個向量{\ttfamily v1}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...由近而遠的順序排序. 如果有兩 個向量{\ttfamily v1},v2... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...近而遠的順序排序. 如果有兩個 向量{\ttfamily v1},v2 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:向 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...而遠的順序排序. 如果有兩個向 量{\ttfamily v1},v2 距... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:量 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...遠的順序排序. 如果有兩個向量 {\ttfamily v1},v2 距離... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:距 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...果有兩個向量{\ttfamily v1},v2 距 離一樣, 且 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:離 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...有兩個向量{\ttfamily v1},v2 距離 一樣, 且 {\ttfamily cmp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...兩個向量{\ttfamily v1},v2 距離一 樣, 且 {\ttfamily cmp} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...個向量{\ttfamily v1},v2 距離一樣 , 且 {\ttfamily cmp} 為{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...向量{\ttfamily v1},v2 距離一樣, 且 {\ttfamily cmp} 為{\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:為 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...,v2 距離一樣, 且 {\ttfamily cmp} 為 {\ttfamily true} , 則直... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...{\ttfamily cmp} 為{\ttfamily true} , 則 直接依照 {\ttfamily v1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:直 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...tfamily cmp} 為{\ttfamily true} , 則直 接依照 {\ttfamily v1$<$... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:接 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...mily cmp} 為{\ttfamily true} , 則直接 依照 {\ttfamily v1$<$v2}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:依 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...y cmp} 為{\ttfamily true} , 則直接依 照 {\ttfamily v1$<$v2} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:照 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...mp} 為{\ttfamily true} , 則直接依照 {\ttfamily v1$<$v2} 來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ..., 則直接依照 {\ttfamily v1$<$v2} 來 決定誰在前面. 最後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...直接依照 {\ttfamily v1$<$v2} 來決 定誰在前面. 最後回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...接依照 {\ttfamily v1$<$v2} 來決定 誰在前面. 最後回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:誰 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...依照 {\ttfamily v1$<$v2} 來決定誰 在前面. 最後回傳一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...照 {\ttfamily v1$<$v2} 來決定誰在 前面. 最後回傳一陣... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ... {\ttfamily v1$<$v2} 來決定誰在前 面. 最後回傳一陣列... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:面 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...{\ttfamily v1$<$v2} 來決定誰在前面 . 最後回傳一陣列包... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:最 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...amily v1$<$v2} 來決定誰在前面. 最 後回傳一陣列包含... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...ly v1$<$v2} 來決定誰在前面. 最後 回傳一陣列包含所... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...v1$<$v2} 來決定誰在前面. 最後回 傳一陣列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...<$v2} 來決定誰在前面. 最後回傳 一陣列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...2} 來決定誰在前面. 最後回傳一 陣列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...來決定誰在前面. 最後回傳一陣 列包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:列 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...決定誰在前面. 最後回傳一陣列 包含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...定誰在前面. 最後回傳一陣列包 含所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:含 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...誰在前面. 最後回傳一陣列包含 所有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...在前面. 最後回傳一陣列包含所 有解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...前面. 最後回傳一陣列包含所有 解. Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.275 ...面. 最後回傳一陣列包含所有解 . Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:清 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清 空所有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空 所有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所 有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有 資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資 料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料 並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料並 重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:重 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料並重 新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料並重新 給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料並重新給 定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料並重新給定 維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料並重新給定維 度 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.288 清空所有資料並重新給定維度 Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./classmeow_1_1WatchBall.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 {\bfseries 多 個camera}, 一個offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 {\bfseries 多個 camera}, 一個offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 {\bfseries 多個camera}, 一 個offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 {\bfseries 多個camera}, 一個 offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 {\bfseries 多個camera}, 一個offset, 一 個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 {\bfseries 多個camera}, 一個offset, 一個 rotation Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1WatchBall.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1WatchBall.pdf used on input line 16. (pdftex.def) Requested size: 117.36629pt x 56.9055pt. [223 <./classmeow_1_1WatchBall.pdf>] ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 取 得有幾個camera \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 \begin{DoxyCompactList}\small\item\em 取得 有幾個camera \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...n{DoxyCompactList}\small\item\em 取得有 幾個camera \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...oxyCompactList}\small\item\em 取得有幾 個camera \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.39 ...CompactList}\small\item\em 取得有幾個 camera \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 取 得 cameras \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.41 \begin{DoxyCompactList}\small\item\em 取得 cameras \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 取 得 cameras (non-\/constant) \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.43 \begin{DoxyCompactList}\small\item\em 取得 cameras (non-\/constant) \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 設 定 camera \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.45 \begin{DoxyCompactList}\small\item\em 設定 camera \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 取 得第i個camera \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 \begin{DoxyCompactList}\small\item\em 取得 第i個camera \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...n{DoxyCompactList}\small\item\em 取得第 i個camera \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.47 ...xyCompactList}\small\item\em 取得第i個 camera \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 取 得第i個camera (non-\/consta... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 \begin{DoxyCompactList}\small\item\em 取得 第i個camera (non-\/consta... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...n{DoxyCompactList}\small\item\em 取得第 i個camera (non-\/constant... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.49 ...xyCompactList}\small\item\em 取得第i個 camera (non-\/constant ref... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 設 定第i個camera \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 \begin{DoxyCompactList}\small\item\em 設定 第i個camera \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...n{DoxyCompactList}\small\item\em 設定第 i個camera \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.51 ...xyCompactList}\small\item\em 設定第i個 camera \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 取 得offset \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.53 \begin{DoxyCompactList}\small\item\em 取得 offset \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 取 得offset (non-\/constant refe... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.55 \begin{DoxyCompactList}\small\item\em 取得 offset (non-\/constant refe... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 設 定offset \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.57 \begin{DoxyCompactList}\small\item\em 設定 offset \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 取 得底片color \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 \begin{DoxyCompactList}\small\item\em 取得 底片color \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...n{DoxyCompactList}\small\item\em 取得底 片color \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...oxyCompactList}\small\item\em 取得底片 color \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 輸 出展開圖 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 \begin{DoxyCompactList}\small\item\em 輸出 展開圖 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:展 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...n{DoxyCompactList}\small\item\em 輸出展 開圖 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:開 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...oxyCompactList}\small\item\em 輸出展開 圖 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.61 ...CompactList}\small\item\em 輸出展開圖 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 將 資料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 \begin{DoxyCompactList}\small\item\em 將資 料寫入檔案 \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...n{DoxyCompactList}\small\item\em 將資料 寫入檔案 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...oxyCompactList}\small\item\em 將資料寫 入檔案 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...CompactList}\small\item\em 將資料寫入 檔案 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...pactList}\small\item\em 將資料寫入檔 案 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.65 ...tList}\small\item\em 將資料寫入檔案 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 將 資料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 \begin{DoxyCompactList}\small\item\em 將資 料讀入 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...n{DoxyCompactList}\small\item\em 將資料 讀入 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...oxyCompactList}\small\item\em 將資料讀 入 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 ...CompactList}\small\item\em 將資料讀入 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 \begin{DoxyCompactList}\small\item\em new一 個自己 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...n{DoxyCompactList}\small\item\em new一個 自己 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...oxyCompactList}\small\item\em new一個自 己 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.69 ...CompactList}\small\item\em new一個自己 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 複 製資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 \begin{DoxyCompactList}\small\item\em 複製 資料 \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...n{DoxyCompactList}\small\item\em 複製資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.71 ...oxyCompactList}\small\item\em 複製資料 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.73 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \begin{DoxyCompactList}\small\item\em 回 傳class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 \begin{DoxyCompactList}\small\item\em 回傳 class的type \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.75 ...yCompactList}\small\item\em 回傳class的 type \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 {\bfseries 多 個camera}, 一個offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 {\bfseries 多個 camera}, 一個offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 {\bfseries 多個camera}, 一 個offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 {\bfseries 多個camera}, 一個 offset, 一個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 {\bfseries 多個camera}, 一個offset, 一 個rotation Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.82 ...series 多個camera}, 一個offset, 一個 rotation Your command was ignored. Type I to replace it with another command, or to continue without it. [224] Underfull \hbox (badness 10000) detected at line 84 [][][] [] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 140. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 140. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 140. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 取 得第i個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 取得 第i個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 取得第 i個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.161 取得第i個 camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 取 得第i個camera (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 取得 第i個camera (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 取得第 i個camera (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.176 取得第i個 camera (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 設 定第i個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 設定 第i個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:第 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 設定第 i個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.192 設定第i個 camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 取 得 cameras Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.207 取得 cameras Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.222 設 定 camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.222 設定 camera Your command was ignored. Type I to replace it with another command, or to continue without it. [225] ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.237 取 得 cameras (non-\/constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.237 取得 cameras (non-\/constant) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 取 得有幾個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 取得 有幾個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 取得有 幾個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 取得有幾 個camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.252 取得有幾個 camera Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 取 得底片color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 取得 底片color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 取得底 片color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.267 取得底片 color Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:複 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 複 製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:製 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 複製 資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 複製資 料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.297 複製資料 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 輸 入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 輸入 型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 輸入型 別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:別 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 輸入型別 是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 輸入型別是 {\ttfamily \hyperlink{classmeow_1_1ObjBase}{Obj\-Base}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:事 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...}{Obj\-Base}} {\ttfamily const$\ast$} 事 實上這個method就只... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...bj\-Base}} {\ttfamily const$\ast$} 事實 上這個method就只是... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...-Base}} {\ttfamily const$\ast$} 事實上 這個method就只是幫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...se}} {\ttfamily const$\ast$} 事實上這 個method就只是幫忙... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...} {\ttfamily const$\ast$} 事實上這個 method就只是幫忙轉... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...ily const$\ast$} 事實上這個method就 只是幫忙轉型然後... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ... const$\ast$} 事實上這個method就只 是幫忙轉型然後呼... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...nst$\ast$} 事實上這個method就只是 幫忙轉型然後呼叫... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:幫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...$\ast$} 事實上這個method就只是幫 忙轉型然後呼叫原... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:忙 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...st$} 事實上這個method就只是幫忙 轉型然後呼叫原本... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:轉 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...} 事實上這個method就只是幫忙轉 型然後呼叫原本的{\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...實上這個method就只是幫忙轉型 然後呼叫原本的{\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:然 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...上這個method就只是幫忙轉型然 後呼叫原本的{\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:後 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...這個method就只是幫忙轉型然後 呼叫原本的{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:呼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...個method就只是幫忙轉型然後呼 叫原本的{\ttfamily cop... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...method就只是幫忙轉型然後呼叫 原本的{\ttfamily copy\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...ethod就只是幫忙轉型然後呼叫原 本的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...od就只是幫忙轉型然後呼叫原本 的{\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.299 ...只是幫忙轉型然後呼叫原本的 {\ttfamily copy\-From} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 \mbox{\tt in} & {\em b} & 資 料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 \mbox{\tt in} & {\em b} & 資料 來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 \mbox{\tt in} & {\em b} & 資料來 源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:源 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.303 \mbox{\tt in} & {\em b} & 資料來源 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 306 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 new一 個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 new一個 自己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 new一個自 己 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:己 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.326 new一個自己 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 328 [][][] [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 一 個new出來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 一個 new出來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 一個new出 來的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 一個new出來 的pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.329 一個new出來的 pointer Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.348 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 350 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.351 ...r} {\ttfamily const{\ttfamily $\ast$} 形 式的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.351 ...{\ttfamily const{\ttfamily $\ast$} 形式 的typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.351 ...tfamily const{\ttfamily $\ast$} 形式的 typename} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 輸 出展開圖 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 輸出 展開圖 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:展 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 輸出展 開圖 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:開 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 輸出展開 圖 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圖 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.370 輸出展開圖 Your command was ignored. Type I to replace it with another command, or to continue without it. [226] [227] ! Package inputenc Error: Unicode char \u8:半 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.374 \mbox{\tt in} & {\em radius} & 半 徑 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徑 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.374 \mbox{\tt in} & {\em radius} & 半徑 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取 得offset Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.390 取得 offset Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 取 得offset (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:得 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 取得 offset (non-\/constant reference) Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.420 設 定offset Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.420 設定 offset Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 將 資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 將資 料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 將資料 讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:讀 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 將資料讀 入 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.452 將資料讀入 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 454 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.455 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.455 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.455 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 回 傳class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 回傳 class的type Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.489 回傳class的 type Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 491 [][][] [] ! Package inputenc Error: Unicode char \u8:形 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.492 {\ttfamily std\-::string} 形 式的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.492 {\ttfamily std\-::string} 形式 的typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.492 {\ttfamily std\-::string} 形式的 typename Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.513 將 資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.513 將資 料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.513 將資料 寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:寫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.513 將資料寫 入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.513 將資料寫入 檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.513 將資料寫入檔 案 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:案 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.513 將資料寫入檔案 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 515 [][][] [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.516 未 完成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.516 未完 成 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.516 未完成 Your command was ignored. Type I to replace it with another command, or to continue without it. [228]) (./classmeow_1_1YUV.tex Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 3. [229] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 112. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 112. [230]) (./classmeow_1_1YUVf.tex File: classmeow_1_1YUVf.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1YUVf.pdf used on input line 11. (pdftex.def) Requested size: 103.84995pt x 56.9055pt. [231 <./classmeow_1_1YUVf.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 65. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 65. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 65. ) (./classmeow_1_1YUVf__Space.tex ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以 浮點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮 點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點 數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數 {\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), {\bfseries V}(... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...數{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...), {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...eries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...es U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...U}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...色度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...度), {\bfseries V}(濃度) 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...), {\bfseries V}(濃度) 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...{\bfseries V}(濃度) 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...fseries V}(濃度) 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...ries V}(濃度) 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...s V}(濃度) 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.6 ...}(濃度) 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. File: classmeow_1_1YUVf__Space.pdf Graphic file (type pdf) Package pdftex.def Info: classmeow_1_1YUVf__Space.pdf used on input line 16. (pdftex.def) Requested size: 142.9746pt x 56.9055pt. [232] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以 浮點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮 點數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點 數{\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數 {\bfseries Y}(亮度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), {\bfseries V}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...series V}(濃度) 三個值所組成的色 彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...ies V}(濃度) 三個值所組成的色彩 空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ... V}(濃度) 三個值所組成的色彩空 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.88 ...(濃度) 三個值所組成的色彩空間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其 中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中 範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:範 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範 圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圍 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍 都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都 介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:介 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介 於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:於 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於 0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:之 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之 間 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.90 其中範圍都介於0.0$\sim$1.0之間 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 92 [][][] [] [233 <./classmeow_1_1YUVf__Space.pdf>] Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\sim' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 152. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 166. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 166. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 166. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 177. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `\ast' on input line 177. Package hyperref Warning: Token not allowed in a PDF string (Unicode): (hyperref) removing `math shift' on input line 177. [234] [235]) [236] Chapter 7. (./Color3__Space_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 以 三個channel所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 以三 個channel所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...n{DoxyCompactList}\small\item\em 以三個 channel所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...actList}\small\item\em 以三個channel所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...List}\small\item\em 以三個channel所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...t}\small\item\em 以三個channel所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...small\item\em 以三個channel所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...ll\item\em 以三個channel所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...item\em 以三個channel所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...m\em 以三個channel所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...m 以三個channel所組成的色彩空間 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./HSL_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] [237 ]) (./HSL_8hpp.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ) (./HSL__Space_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Y}(亮度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Y}(亮度), {\b... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...mall\item\em 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...l\item\em 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...series V}(濃度) 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...ies V}(濃度) 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ... V}(濃度) 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...(濃度) 三個值所組成的色彩空間 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. [238]) (./HSV_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ) (./HSV_8hpp.tex Underfull \hbox (badness 10000) in paragraph at lines 4--9 [] [239]) (./HSV__Space_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--11 [] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Y}(亮度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Y}(亮度), {\b... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...mall\item\em 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...l\item\em 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...series V}(濃度) 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ies V}(濃度) 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ... V}(濃度) 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...(濃度) 三個值所組成的色彩空間 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./RGB_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--5 [] [240]) (./RGB_8hpp.tex Underfull \hbox (badness 10000) in paragraph at lines 4--6 [] ) (./RGB__Space_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 以 整數 {\bfseries Red}, {\bfse... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:整 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 以整 數 {\bfseries Red}, {\bfse... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...n{DoxyCompactList}\small\item\em 以整數 {\bfseries Red}, {\bfseri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...{\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...fseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...ries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...s Green}, {\bfseries Blue} 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...reen}, {\bfseries Blue} 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...n}, {\bfseries Blue} 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ... {\bfseries Blue} 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...bfseries Blue} 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...eries Blue} 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...es Blue} 三個值所組成的色彩空間 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Red}, {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Red}, {\bf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Red}, {\bfse... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Red}, {\bfserie... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...}, {\bfseries Green}, {\bfseries Blue} 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...{\bfseries Green}, {\bfseries Blue} 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...fseries Green}, {\bfseries Blue} 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...ries Green}, {\bfseries Blue} 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...s Green}, {\bfseries Blue} 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...reen}, {\bfseries Blue} 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...n}, {\bfseries Blue} 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ... {\bfseries Blue} 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...bfseries Blue} 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...eries Blue} 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...es Blue} 三個值所組成的色彩空間 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./YUV_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--6 [] [241]) (./YUV_8hpp.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] ) (./YUV__Space_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--9 [] ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 \begin{DoxyCompactList}\small\item\em 以 浮點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:浮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 \begin{DoxyCompactList}\small\item\em 以浮 點數{\bfseries Y}(亮度)... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...n{DoxyCompactList}\small\item\em 以浮點 數{\bfseries Y}(亮度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...oxyCompactList}\small\item\em 以浮點數 {\bfseries Y}(亮度), {\b... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:亮 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...mall\item\em 以浮點數{\bfseries Y}(亮 度), {\bfseries U}(色度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...l\item\em 以浮點數{\bfseries Y}(亮度 ), {\bfseries U}(色度), ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...{\bfseries Y}(亮度), {\bfseries U}(色 度), {\bfseries V}(濃度... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...\bfseries Y}(亮度), {\bfseries U}(色度 ), {\bfseries V}(濃度) ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:濃 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ..., {\bfseries U}(色度), {\bfseries V}(濃 度) 三個值所組成的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...\bfseries U}(色度), {\bfseries V}(濃度 ) 三個值所組成的色... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:三 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...ries U}(色度), {\bfseries V}(濃度) 三 個值所組成的色彩... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...s U}(色度), {\bfseries V}(濃度) 三個 值所組成的色彩空... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...}(色度), {\bfseries V}(濃度) 三個值 所組成的色彩空間 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...度), {\bfseries V}(濃度) 三個值所 組成的色彩空間 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:組 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...), {\bfseries V}(濃度) 三個值所組 成的色彩空間 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ..., {\bfseries V}(濃度) 三個值所組成 的色彩空間 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...\bfseries V}(濃度) 三個值所組成的 色彩空間 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:色 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...series V}(濃度) 三個值所組成的色 彩空間 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:彩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...ies V}(濃度) 三個值所組成的色彩 空間 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:空 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ... V}(濃度) 三個值所組成的色彩空 間 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...(濃度) 三個值所組成的色彩空間 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. [242]) (./BinaryIndexTree_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] ! Package inputenc Error: Unicode char \u8:極 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 極 度簡化的 {\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:度 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 極度 簡化的 {\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:簡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...n{DoxyCompactList}\small\item\em 極度簡 化的 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...oxyCompactList}\small\item\em 極度簡化 的 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...CompactList}\small\item\em 極度簡化的 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:已 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...ssmeow_1_1SegmentTree}{Segment\-Tree}} 已 無區間更新的操作 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...eow_1_1SegmentTree}{Segment\-Tree}} 已無 區間更新的操作 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ..._1_1SegmentTree}{Segment\-Tree}} 已無區 間更新的操作 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...1SegmentTree}{Segment\-Tree}} 已無區間 更新的操作 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:更 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...gmentTree}{Segment\-Tree}} 已無區間更 新的操作 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:新 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...ntTree}{Segment\-Tree}} 已無區間更新 的操作 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...ree}{Segment\-Tree}} 已無區間更新的 操作 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...}{Segment\-Tree}} 已無區間更新的操 作 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...egment\-Tree}} 已無區間更新的操作 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./DisjointSet_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 用 來維護一堆互斥集的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 用來 維護一堆互斥集的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...n{DoxyCompactList}\small\item\em 用來維 護一堆互斥集的資... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...oxyCompactList}\small\item\em 用來維護 一堆互斥集的資訊 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...CompactList}\small\item\em 用來維護一 堆互斥集的資訊 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...pactList}\small\item\em 用來維護一堆 互斥集的資訊 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:互 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...tList}\small\item\em 用來維護一堆互 斥集的資訊 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:斥 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...st}\small\item\em 用來維護一堆互斥 集的資訊 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:集 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...\small\item\em 用來維護一堆互斥集 的資訊 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...all\item\em 用來維護一堆互斥集的 資訊 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...\item\em 用來維護一堆互斥集的資 訊 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...em\em 用來維護一堆互斥集的資訊 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./HashTable_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--6 [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 \begin{DoxyCompactList}\small\item\em 一 個當key相撞時會用list... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 \begin{DoxyCompactList}\small\item\em 一個 當key相撞時會用list... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:當 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...n{DoxyCompactList}\small\item\em 一個當 key相撞時會用list解... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...CompactList}\small\item\em 一個當key相 撞時會用list解決的h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:撞 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...pactList}\small\item\em 一個當key相撞 時會用list解決的hash... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:時 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...tList}\small\item\em 一個當key相撞時 會用list解決的hash\-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:會 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...st}\small\item\em 一個當key相撞時會 用list解決的hash\-\_\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...\small\item\em 一個當key相撞時會用 list解決的hash\-\_\-tab... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:解 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...item\em 一個當key相撞時會用list解 決的hash\-\_\-table \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:決 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...m\em 一個當key相撞時會用list解決 的hash\-\_\-table \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...m 一個當key相撞時會用list解決的 hash\-\_\-table \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. [243]) (./KD__Tree_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] ) (./MergeableHeap_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--6 [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 \begin{DoxyCompactList}\small\item\em 一 個用 {\bfseries 左偏樹} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 \begin{DoxyCompactList}\small\item\em 一個 用 {\bfseries 左偏樹} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...n{DoxyCompactList}\small\item\em 一個用 {\bfseries 左偏樹} 實... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:左 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...st}\small\item\em 一個用 {\bfseries 左 偏樹} 實作的 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:偏 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...\small\item\em 一個用 {\bfseries 左偏 樹} 實作的 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...all\item\em 一個用 {\bfseries 左偏樹 } 實作的 {\ttfamily Max... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...tem\em 一個用 {\bfseries 左偏樹} 實 作的 {\ttfamily Maximum-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...\em 一個用 {\bfseries 左偏樹} 實作 的 {\ttfamily Maximum-\/\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... 一個用 {\bfseries 左偏樹} 實作的 {\ttfamily Maximum-\/\-He... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:除 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...作的 {\ttfamily Maximum-\/\-Heap} , 除 了原本heap有的功能... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...的 {\ttfamily Maximum-\/\-Heap} , 除了 原本heap有的功能外,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:原 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... {\ttfamily Maximum-\/\-Heap} , 除了原 本heap有的功能外, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...\ttfamily Maximum-\/\-Heap} , 除了原本 heap有的功能外, 還... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...ly Maximum-\/\-Heap} , 除了原本heap有 的功能外, 還支援 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...Maximum-\/\-Heap} , 除了原本heap有的 功能外, 還支援 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...imum-\/\-Heap} , 除了原本heap有的功 能外, 還支援 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...m-\/\-Heap} , 除了原本heap有的功能 外, 還支援 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:外 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 .../\-Heap} , 除了原本heap有的功能外 , 還支援 {\ttfamily mer... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:還 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...ap} , 除了原本heap有的功能外, 還 支援 {\ttfamily merge} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ... , 除了原本heap有的功能外, 還支 援 {\ttfamily merge} 功... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...除了原本heap有的功能外, 還支援 {\ttfamily merge} 功能 ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...功能外, 還支援 {\ttfamily merge} 功 能 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...能外, 還支援 {\ttfamily merge} 功能 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./SegmentTree_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 中 文名 {\ttfamily 線段樹} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:文 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 中文 名 {\ttfamily 線段樹} \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...n{DoxyCompactList}\small\item\em 中文名 {\ttfamily 線段樹} \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...st}\small\item\em 中文名 {\ttfamily 線 段樹} \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...\small\item\em 中文名 {\ttfamily 線段 樹} \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...all\item\em 中文名 {\ttfamily 線段樹 } \end{DoxyCompactList}\en... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./SplayTree_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] [244] ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 是 一種神乎其技的資料結... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 是一 種神乎其技的資料結... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:種 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...n{DoxyCompactList}\small\item\em 是一種 神乎其技的資料結... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:神 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...oxyCompactList}\small\item\em 是一種神 乎其技的資料結構, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:乎 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...CompactList}\small\item\em 是一種神乎 其技的資料結構, 維... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:其 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...pactList}\small\item\em 是一種神乎其 技的資料結構, 維護... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:技 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...tList}\small\item\em 是一種神乎其技 的資料結構, 維護一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...st}\small\item\em 是一種神乎其技的 資料結構, 維護一堆... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...\small\item\em 是一種神乎其技的資 料結構, 維護一堆 Ke... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...all\item\em 是一種神乎其技的資料 結構, 維護一堆 Key-\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...\item\em 是一種神乎其技的資料結 構, 維護一堆 Key-\/$>... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:構 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...em\em 是一種神乎其技的資料結構 , 維護一堆 Key-\/$>$Va... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ... 是一種神乎其技的資料結構, 維 護一堆 Key-\/$>$Value .... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:護 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...一種神乎其技的資料結構, 維護 一堆 Key-\/$>$Value . ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...種神乎其技的資料結構, 維護一 堆 Key-\/$>$Value . 並... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:堆 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...神乎其技的資料結構, 維護一堆 Key-\/$>$Value . 並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...結構, 維護一堆 Key-\/$>$Value . 並 且支援 一些 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...構, 維護一堆 Key-\/$>$Value . 並且 支援 一些 {\ttfamily s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:支 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ..., 維護一堆 Key-\/$>$Value . 並且支 援 一些 {\ttfamily std\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:援 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...維護一堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...一堆 Key-\/$>$Value . 並且支援 一 些 {\ttfamily std\-::map}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:些 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...堆 Key-\/$>$Value . 並且支援 一些 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:難 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...支援 一些 {\ttfamily std\-::map} 難 以快速實踐的操作, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...援 一些 {\ttfamily std\-::map} 難以 快速實踐的操作, 如... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:快 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ... 一些 {\ttfamily std\-::map} 難以快 速實踐的操作, 如 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:速 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...一些 {\ttfamily std\-::map} 難以快速 實踐的操作, 如 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:實 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...些 {\ttfamily std\-::map} 難以快速實 踐的操作, 如 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:踐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ... {\ttfamily std\-::map} 難以快速實踐 的操作, 如 {\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...ttfamily std\-::map} 難以快速實踐的 操作, 如 {\ttfamily spl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...amily std\-::map} 難以快速實踐的操 作, 如 {\ttfamily split}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...ly std\-::map} 難以快速實踐的操作 , 如 {\ttfamily split} , ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...d\-::map} 難以快速實踐的操作, 如 {\ttfamily split} , {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 \begin{DoxyCompactList}\small\item\em 類 似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 \begin{DoxyCompactList}\small\item\em 類似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...}\small\item\em 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...tfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...mily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...y stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ...tl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ... 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:基 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 基 本上跟\-Splay\-Tree一樣, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:本 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 基本 上跟\-Splay\-Tree一樣, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...n{DoxyCompactList}\small\item\em 基本上 跟\-Splay\-Tree一樣, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...oxyCompactList}\small\item\em 基本上跟 \-Splay\-Tree一樣, 不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...small\item\em 基本上跟\-Splay\-Tree一 樣, 不過這邊結合線... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ll\item\em 基本上跟\-Splay\-Tree一樣 , 不過這邊結合線段... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...em\em 基本上跟\-Splay\-Tree一樣, 不 過這邊結合線段樹, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...em 基本上跟\-Splay\-Tree一樣, 不過 這邊結合線段樹, 多... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...基本上跟\-Splay\-Tree一樣, 不過這 邊結合線段樹, 多了... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...本上跟\-Splay\-Tree一樣, 不過這邊 結合線段樹, 多了區... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...上跟\-Splay\-Tree一樣, 不過這邊結 合線段樹, 多了區間... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...跟\-Splay\-Tree一樣, 不過這邊結合 線段樹, 多了區間操... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...\-Splay\-Tree一樣, 不過這邊結合線 段樹, 多了區間操作... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...play\-Tree一樣, 不過這邊結合線段 樹, 多了區間操作 (... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...y\-Tree一樣, 不過這邊結合線段樹 , 多了區間操作 (線... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ee一樣, 不過這邊結合線段樹, 多 了區間操作 (線段樹... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:了 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...樣, 不過這邊結合線段樹, 多了 區間操作 (線段樹相... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:區 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ..., 不過這邊結合線段樹, 多了區 間操作 (線段樹相關... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:間 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ... 不過這邊結合線段樹, 多了區間 操作 (線段樹相關ope... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:操 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...過這邊結合線段樹, 多了區間操 作 (線段樹相關operat... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:作 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...這邊結合線段樹, 多了區間操作 (線段樹相關operator... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:線 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...結合線段樹, 多了區間操作 (線 段樹相關operator定義... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:段 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...合線段樹, 多了區間操作 (線段 樹相關operator定義請... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:樹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...線段樹, 多了區間操作 (線段樹 相關operator定義請見... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:相 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...段樹, 多了區間操作 (線段樹相 關operator定義請見 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:關 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...樹, 多了區間操作 (線段樹相關 operator定義請見 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...區間操作 (線段樹相關operator定 義請見 {\ttfamily \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:義 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...間操作 (線段樹相關operator定義 請見 {\ttfamily \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:請 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...操作 (線段樹相關operator定義請 見 {\ttfamily \hyperlink{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:見 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...作 (線段樹相關operator定義請見 {\ttfamily \hyperlink{cla... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 類 似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 類似 {\ttfamily stl} 的 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...}\small\item\em 類似 {\ttfamily stl} 的 {\ttfamily iterator} ,不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...tfamily stl} 的 {\ttfamily iterator} ,不 過這邊叫做{\ttfamily ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...mily stl} 的 {\ttfamily iterator} ,不過 這邊叫做{\ttfamily \hy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...y stl} 的 {\ttfamily iterator} ,不過這 邊叫做{\ttfamily \hyper... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:邊 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...tl} 的 {\ttfamily iterator} ,不過這邊 叫做{\ttfamily \hyperlin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:叫 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... 的 {\ttfamily iterator} ,不過這邊叫 做{\ttfamily \hyperlink{c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:做 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... {\ttfamily iterator} ,不過這邊叫做 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./VP__Tree_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] ! Package inputenc Error: Unicode char \u8:跟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 跟 \-K\-D\-\_\-\-Tree很像歐 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:很 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...st}\small\item\em 跟\-K\-D\-\_\-\-Tree很 像歐 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:像 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...\small\item\em 跟\-K\-D\-\_\-\-Tree很像 歐 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:歐 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...all\item\em 跟\-K\-D\-\_\-\-Tree很像歐 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./Vectors_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] [245]) (./Bitmap_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--12 [] ! Package inputenc Error: Unicode char \u8:二 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.16 \begin{DoxyCompactList}\small\item\em 二 維點陣資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:維 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.16 \begin{DoxyCompactList}\small\item\em 二維 點陣資料 \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.16 ...n{DoxyCompactList}\small\item\em 二維點 陣資料 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:陣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.16 ...oxyCompactList}\small\item\em 二維點陣 資料 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:資 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.16 ...CompactList}\small\item\em 二維點陣資 料 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:料 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.16 ...pactList}\small\item\em 二維點陣資料 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./BundleAdjustment_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--6 [] ) (./BundleAdjustment__LM_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--12 [] [246]) (./Camera_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--11 [] ) (./Eye_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 一 個 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 一個 {\ttfamily \hyperlink{clas... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...yperlink{classmeow_1_1Camera}{Camera}} 加 上一個offset transforma... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...rlink{classmeow_1_1Camera}{Camera}} 加上 一個offset transformatio... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...nk{classmeow_1_1Camera}{Camera}} 加上一 個offset transformation \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...classmeow_1_1Camera}{Camera}} 加上一個 offset transformation \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./FeaturePoint_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] ! Package inputenc Error: Unicode char \u8:特 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 特 徵點 \end{DoxyCompactList}\e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:徵 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 特徵 點 \end{DoxyCompactList}\e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:點 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...n{DoxyCompactList}\small\item\em 特徵點 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. [247]) (./FeaturePointsDetector_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ) (./FeaturePointsDetector__Harris_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] ) (./FeaturePointsMatch_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] [248]) (./FeaturePointsMatch__K__Match_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--9 [] ) (./IdentityPoints_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] [249] ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 把 一個 {\ttfamily std\-::map$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 把一 個 {\ttfamily std\-::map$<... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...n{DoxyCompactList}\small\item\em 把一個 {\ttfamily std\-::map$<$I... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...::map$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包 起來 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...ap$<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起 來 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...<$I\-D},Vector$<$\-Scalar$>$ $>$ 包起來 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./Photo_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--16 [] ! Package inputenc Error: Unicode char \u8:底 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 \begin{DoxyCompactList}\small\item\em 底 片 \end{DoxyCompactList}\end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:片 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.20 \begin{DoxyCompactList}\small\item\em 底片 \end{DoxyCompactList}\end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./ViewPort_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--5 [] ! Package inputenc Error: Unicode char \u8:未 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 \begin{DoxyCompactList}\small\item\em 未 完待續 \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:完 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 \begin{DoxyCompactList}\small\item\em 未完 待續 \end{DoxyCompactList}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:待 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ...in{DoxyCompactList}\small\item\em 未完待 續 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:續 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.9 ...DoxyCompactList}\small\item\em 未完待續 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./WatchBall_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--11 [] [250] ! Package inputenc Error: Unicode char \u8:多 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...yCompactList}\small\item\em {\bfseries 多 個camera}, 一個offset, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...mpactList}\small\item\em {\bfseries 多個 camera}, 一個offset, 一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...mall\item\em {\bfseries 多個camera}, 一 個offset, 一個rotation ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...l\item\em {\bfseries 多個camera}, 一個 offset, 一個rotation \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...\bfseries 多個camera}, 一個offset, 一 個rotation \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...series 多個camera}, 一個offset, 一個 rotation \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./LinearTransformation_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] ) (./LinearTransformations_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] [251]) (./Matrix_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ) (./methods_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--9 [] ) (./Transformation_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] [252]) (./Transformations_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--9 [] ) (./math_2utility_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ! Package inputenc Error: Unicode char \u8:如 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 如 果abs(輸入的數值) $<$ ep... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:果 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 \begin{DoxyCompactList}\small\item\em 如果 abs(輸入的數值) $<$ ep... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...xyCompactList}\small\item\em 如果abs(輸 入的數值) $<$ eps, 則... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...ompactList}\small\item\em 如果abs(輸入 的數值) $<$ eps, 則回... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...actList}\small\item\em 如果abs(輸入的 數值) $<$ eps, 則回傳... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...List}\small\item\em 如果abs(輸入的數 值) $<$ eps, 則回傳0, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...t}\small\item\em 如果abs(輸入的數值 ) $<$ eps, 則回傳0, 否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...em 如果abs(輸入的數值) $<$ eps, 則 回傳0, 否則回傳輸... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...如果abs(輸入的數值) $<$ eps, 則回 傳0, 否則回傳輸入... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...果abs(輸入的數值) $<$ eps, 則回傳 0, 否則回傳輸入的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...(輸入的數值) $<$ eps, 則回傳0, 否 則回傳輸入的數值 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:則 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...入的數值) $<$ eps, 則回傳0, 否則 回傳輸入的數值 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...的數值) $<$ eps, 則回傳0, 否則回 傳輸入的數值 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...數值) $<$ eps, 則回傳0, 否則回傳 輸入的數值 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...值) $<$ eps, 則回傳0, 否則回傳輸 入的數值 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...) $<$ eps, 則回傳0, 否則回傳輸入 的數值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...$<$ eps, 則回傳0, 否則回傳輸入的 數值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ... eps, 則回傳0, 否則回傳輸入的數 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.17 ...s, 則回傳0, 否則回傳輸入的數值 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. [253] ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 只 將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 \begin{DoxyCompactList}\small\item\em 只將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...\small\item\em 只將 {\ttfamily sigs} 個 標準差以內的數據... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...all\item\em 只將 {\ttfamily sigs} 個標 準差以內的數據拿... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...\item\em 只將 {\ttfamily sigs} 個標準 差以內的數據拿來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...em\em 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...em 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...只將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...將 {\ttfamily sigs} 個標準差以內的 數據拿來取平均 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ... {\ttfamily sigs} 個標準差以內的數 據拿來取平均 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...ttfamily sigs} 個標準差以內的數據 拿來取平均 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...amily sigs} 個標準差以內的數據拿 來取平均 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...ly sigs} 個標準差以內的數據拿來 取平均 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...sigs} 個標準差以內的數據拿來取 平均 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...s} 個標準差以內的數據拿來取平 均 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.33 ...個標準差以內的數據拿來取平均 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 只 將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 \begin{DoxyCompactList}\small\item\em 只將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...\small\item\em 只將 {\ttfamily sigs} 個 標準差以內的數據... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...all\item\em 只將 {\ttfamily sigs} 個標 準差以內的數據拿... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...\item\em 只將 {\ttfamily sigs} 個標準 差以內的數據拿來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...em\em 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...em 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...只將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...將 {\ttfamily sigs} 個標準差以內的 數據拿來取平均, 不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ... {\ttfamily sigs} 個標準差以內的數 據拿來取平均, 不過... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...ttfamily sigs} 個標準差以內的數據 拿來取平均, 不過這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...amily sigs} 個標準差以內的數據拿 來取平均, 不過這次... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...ly sigs} 個標準差以內的數據拿來 取平均, 不過這次用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...sigs} 個標準差以內的數據拿來取 平均, 不過這次用 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...s} 個標準差以內的數據拿來取平 均, 不過這次用 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...個標準差以內的數據拿來取平均 , 不過這次用 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...準差以內的數據拿來取平均, 不 過這次用 {\ttfamily p}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...差以內的數據拿來取平均, 不過 這次用 {\ttfamily p} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...以內的數據拿來取平均, 不過這 次用 {\ttfamily p} 來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...內的數據拿來取平均, 不過這次 用 {\ttfamily p} 來加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...的數據拿來取平均, 不過這次用 {\ttfamily p} 來加權... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...平均, 不過這次用 {\ttfamily p} 來 加權平均 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...均, 不過這次用 {\ttfamily p} 來加 權平均 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:權 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ..., 不過這次用 {\ttfamily p} 來加權 平均 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...不過這次用 {\ttfamily p} 來加權平 均 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.35 ...過這次用 {\ttfamily p} 來加權平均 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:就 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 就 只是個取絕對值 \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 \begin{DoxyCompactList}\small\item\em 就只 是個取絕對值 \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...n{DoxyCompactList}\small\item\em 就只是 個取絕對值 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...oxyCompactList}\small\item\em 就只是個 取絕對值 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...CompactList}\small\item\em 就只是個取 絕對值 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:絕 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...pactList}\small\item\em 就只是個取絕 對值 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:對 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...tList}\small\item\em 就只是個取絕對 值 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:值 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.37 ...st}\small\item\em 就只是個取絕對值 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:圓 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 圓 周率... \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:周 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 \begin{DoxyCompactList}\small\item\em 圓周 率... \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:率 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.42 ...n{DoxyCompactList}\small\item\em 圓周率 ... \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./utility_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--9 [] ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.13 \begin{DoxyCompactList}\small\item\em 有 .\-from.\-first, .from.\-secon... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 \begin{DoxyCompactList}\small\item\em 若 \-D\-E\-B\-U\-G有被define過... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...tList}\small\item\em 若\-D\-E\-B\-U\-G有 被define過, 將字串印... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...st}\small\item\em 若\-D\-E\-B\-U\-G有被 define過, 將字串印到... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...\item\em 若\-D\-E\-B\-U\-G有被define過 , 將字串印到stderr, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...\em 若\-D\-E\-B\-U\-G有被define過, 將 字串印到stderr, 並且... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ... 若\-D\-E\-B\-U\-G有被define過, 將字 串印到stderr, 並且附... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...\-D\-E\-B\-U\-G有被define過, 將字串 印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:印 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...D\-E\-B\-U\-G有被define過, 將字串印 到stderr, 並且附上檔... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...E\-B\-U\-G有被define過, 將字串印到 stderr, 並且附上檔名... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...被define過, 將字串印到stderr, 並 且附上檔名行號與... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...define過, 將字串印到stderr, 並且 附上檔名行號與所... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:附 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...efine過, 將字串印到stderr, 並且附 上檔名行號與所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...ne過, 將字串印到stderr, 並且附上 檔名行號與所在函... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ..., 將字串印到stderr, 並且附上檔 名行號與所在函數... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ... 將字串印到stderr, 並且附上檔名 行號與所在函數名 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...字串印到stderr, 並且附上檔名行 號與所在函數名 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...串印到stderr, 並且附上檔名行號 與所在函數名 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:與 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...印到stderr, 並且附上檔名行號與 所在函數名 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...到stderr, 並且附上檔名行號與所 在函數名 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...stderr, 並且附上檔名行號與所在 函數名 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:函 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...derr, 並且附上檔名行號與所在函 數名 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...r, 並且附上檔名行號與所在函數 名 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.23 ...並且附上檔名行號與所在函數名 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 類 似\-C的printf, 不過是將... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 \begin{DoxyCompactList}\small\item\em 類似 \-C的printf, 不過是將... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...oxyCompactList}\small\item\em 類似\-C的 printf, 不過是將格式... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...ist}\small\item\em 類似\-C的printf, 不 過是將格式化的字... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...}\small\item\em 類似\-C的printf, 不過 是將格式化的字串... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...mall\item\em 類似\-C的printf, 不過是 將格式化的字串丟... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...l\item\em 類似\-C的printf, 不過是將 格式化的字串丟到 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:格 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...tem\em 類似\-C的printf, 不過是將格 式化的字串丟到 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...\em 類似\-C的printf, 不過是將格式 化的字串丟到 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ... 類似\-C的printf, 不過是將格式化 的字串丟到 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...似\-C的printf, 不過是將格式化的 字串丟到 {\ttfamily st... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...\-C的printf, 不過是將格式化的字 串丟到 {\ttfamily std\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...C的printf, 不過是將格式化的字串 丟到 {\ttfamily std\-::s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...printf, 不過是將格式化的字串丟 到 {\ttfamily std\-::stri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...intf, 不過是將格式化的字串丟到 {\ttfamily std\-::string}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...字串丟到 {\ttfamily std\-::string} 裡 回傳 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...串丟到 {\ttfamily std\-::string} 裡回 傳 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.28 ...丟到 {\ttfamily std\-::string} 裡回傳 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將 輸入字串中的某個patter... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 \begin{DoxyCompactList}\small\item\em 將輸 入字串中的某個patter... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...n{DoxyCompactList}\small\item\em 將輸入 字串中的某個pattern... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...oxyCompactList}\small\item\em 將輸入字 串中的某個pattern取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...CompactList}\small\item\em 將輸入字串 中的某個pattern取代... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...pactList}\small\item\em 將輸入字串中 的某個pattern取代成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...tList}\small\item\em 將輸入字串中的 某個pattern取代成另... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...st}\small\item\em 將輸入字串中的某 個pattern取代成另一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...\small\item\em 將輸入字串中的某個 pattern取代成另一個p... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...m\em 將輸入字串中的某個pattern取 代成另一個pattern \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...m 將輸入字串中的某個pattern取代 成另一個pattern \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...輸入字串中的某個pattern取代成 另一個pattern \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...入字串中的某個pattern取代成另 一個pattern \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...字串中的某個pattern取代成另一 個pattern \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.30 ...串中的某個pattern取代成另一個 pattern \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. [254] ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 檢 查給定字串的結尾是否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 \begin{DoxyCompactList}\small\item\em 檢查 給定字串的結尾是否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...n{DoxyCompactList}\small\item\em 檢查給 定字串的結尾是否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...oxyCompactList}\small\item\em 檢查給定 字串的結尾是否符... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...CompactList}\small\item\em 檢查給定字 串的結尾是否符合... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...pactList}\small\item\em 檢查給定字串 的結尾是否符合給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...tList}\small\item\em 檢查給定字串的 結尾是否符合給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...st}\small\item\em 檢查給定字串的結 尾是否符合給定的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...\small\item\em 檢查給定字串的結尾 是否符合給定的數... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...all\item\em 檢查給定字串的結尾是 否符合給定的數個pa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...\item\em 檢查給定字串的結尾是否 符合給定的數個patte... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...em\em 檢查給定字串的結尾是否符 合給定的數個patterns... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...em 檢查給定字串的結尾是否符合 給定的數個patterns中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...檢查給定字串的結尾是否符合給 定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...查給定字串的結尾是否符合給定 的數個patterns中的一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...給定字串的結尾是否符合給定的 數個patterns中的一個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...定字串的結尾是否符合給定的數 個patterns中的一個 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...字串的結尾是否符合給定的數個 patterns中的一個 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...尾是否符合給定的數個patterns中 的一個 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...是否符合給定的數個patterns中的 一個 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...否符合給定的數個patterns中的一 個 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.32 ...符合給定的數個patterns中的一個 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:階 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 階 層式輸出 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:層 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 \begin{DoxyCompactList}\small\item\em 階層 式輸出 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...n{DoxyCompactList}\small\item\em 階層式 輸出 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...oxyCompactList}\small\item\em 階層式輸 出 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.36 ...CompactList}\small\item\em 階層式輸出 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 將 兩個字串用人類習慣的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 \begin{DoxyCompactList}\small\item\em 將兩 個字串用人類習慣的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...n{DoxyCompactList}\small\item\em 將兩個 字串用人類習慣的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...oxyCompactList}\small\item\em 將兩個字 串用人類習慣的檔... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...CompactList}\small\item\em 將兩個字串 用人類習慣的檔名... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...pactList}\small\item\em 將兩個字串用 人類習慣的檔名排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:人 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...tList}\small\item\em 將兩個字串用人 類習慣的檔名排序... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...st}\small\item\em 將兩個字串用人類 習慣的檔名排序方... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:習 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...\small\item\em 將兩個字串用人類習 慣的檔名排序方式... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:慣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...all\item\em 將兩個字串用人類習慣 的檔名排序方式排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...\item\em 將兩個字串用人類習慣的 檔名排序方式排序 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...em\em 將兩個字串用人類習慣的檔 名排序方式排序 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...em 將兩個字串用人類習慣的檔名 排序方式排序 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...將兩個字串用人類習慣的檔名排 序方式排序 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...兩個字串用人類習慣的檔名排序 方式排序 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...個字串用人類習慣的檔名排序方 式排序 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...字串用人類習慣的檔名排序方式 排序 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...串用人類習慣的檔名排序方式排 序 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.38 ...用人類習慣的檔名排序方式排序 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:若 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 若 \-D\-E\-B\-U\-G有被define過, 將字串印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 若\-D\-E\-B\-U\-G有 被define過, 將字串印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:被 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 若\-D\-E\-B\-U\-G有被 define過, 將字串印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 若\-D\-E\-B\-U\-G有被define過 , 將字串印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 若\-D\-E\-B\-U\-G有被define過, 將 字串印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 若\-D\-E\-B\-U\-G有被define過, 將字 串印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 若\-D\-E\-B\-U\-G有被define過, 將字串 印到stderr, 並且附上... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:印 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...D\-E\-B\-U\-G有被define過, 將字串印 到stderr, 並且附上檔... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...E\-B\-U\-G有被define過, 將字串印到 stderr, 並且附上檔名... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...被define過, 將字串印到stderr, 並 且附上檔名行號與... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:且 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...define過, 將字串印到stderr, 並且 附上檔名行號與所... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:附 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...efine過, 將字串印到stderr, 並且附 上檔名行號與所在... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:上 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...ne過, 將字串印到stderr, 並且附上 檔名行號與所在函... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ..., 將字串印到stderr, 並且附上檔 名行號與所在函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ... 將字串印到stderr, 並且附上檔名 行號與所在函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:行 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...字串印到stderr, 並且附上檔名行 號與所在函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:號 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...串印到stderr, 並且附上檔名行號 與所在函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:與 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...印到stderr, 並且附上檔名行號與 所在函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:所 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...到stderr, 並且附上檔名行號與所 在函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:在 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...stderr, 並且附上檔名行號與所在 函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:函 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...derr, 並且附上檔名行號與所在函 數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...r, 並且附上檔名行號與所在函數 名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.59 ...並且附上檔名行號與所在函數名 Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \mbox{\tt in} & {\em str} & 要 輸出的字串, 必須是c string, 即... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \mbox{\tt in} & {\em str} & 要輸 出的字串, 必須是c string, 即... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:出 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \mbox{\tt in} & {\em str} & 要輸出 的字串, 必須是c string, 即... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \mbox{\tt in} & {\em str} & 要輸出的 字串, 必須是c string, 即... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 \mbox{\tt in} & {\em str} & 要輸出的字 串, 必須是c string, 即... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...{\tt in} & {\em str} & 要輸出的字串 , 必須是c string, 即 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:必 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...in} & {\em str} & 要輸出的字串, 必 須是c string, 即 {\ttfa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:須 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... & {\em str} & 要輸出的字串, 必須 是c string, 即 {\ttfamil... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ... {\em str} & 要輸出的字串, 必須是 c string, 即 {\ttfamily c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:即 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...要輸出的字串, 必須是c string, 即 {\ttfamily char} {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:型 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...ttfamily char} {\ttfamily const$\ast$} 型 態 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:態 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.63 ...amily char} {\ttfamily const$\ast$} 型態 \\ Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 66 [][][] [] ! Package inputenc Error: Unicode char \u8:無 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.67 無 Your command was ignored. Type I to replace it with another command, or to continue without it. Underfull \hbox (badness 10000) detected at line 69 [][][] [] ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 這 是一個 {\bfseries macro} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 這是 一個 {\bfseries macro} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 這是一 個 {\bfseries macro} Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.70 這是一個 {\bfseries macro} Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./Vector_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ) (./ObjArray_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--11 [] [255] ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 純 粹把 {\ttfamily std\-::vecto... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 純粹 把 {\ttfamily std\-::vecto... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...n{DoxyCompactList}\small\item\em 純粹把 {\ttfamily std\-::vector}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...em 純粹把 {\ttfamily std\-::vector} 包 起來, 變成繼承自 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...純粹把 {\ttfamily std\-::vector} 包起 來, 變成繼承自 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...粹把 {\ttfamily std\-::vector} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ... {\ttfamily std\-::vector} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...\ttfamily std\-::vector} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...family std\-::vector} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ily std\-::vector} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ... std\-::vector} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./ObjBase_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--7 [] ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 一 切物件的\-Base, 並要求... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:切 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 \begin{DoxyCompactList}\small\item\em 一切 物件的\-Base, 並要求... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...n{DoxyCompactList}\small\item\em 一切物 件的\-Base, 並要求每... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...oxyCompactList}\small\item\em 一切物件 的\-Base, 並要求每個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...CompactList}\small\item\em 一切物件的 \-Base, 並要求每個物... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:並 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...}\small\item\em 一切物件的\-Base, 並 要求每個物件都要... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...mall\item\em 一切物件的\-Base, 並要 求每個物件都要有re... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:求 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...l\item\em 一切物件的\-Base, 並要求 每個物件都要有read,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:每 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...tem\em 一切物件的\-Base, 並要求每 個物件都要有read, wr... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...\em 一切物件的\-Base, 並要求每個 物件都要有read, write... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:物 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ... 一切物件的\-Base, 並要求每個物 件都要有read, write, c... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:件 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...切物件的\-Base, 並要求每個物件 都要有read, write, crea... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:都 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...物件的\-Base, 並要求每個物件都 要有read, write, create,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...件的\-Base, 並要求每個物件都要 有read, write, create, ..... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:有 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...的\-Base, 並要求每個物件都要有 read, write, create, ... ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:等 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...件都要有read, write, create, ... 等 功能 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:功 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...都要有read, write, create, ... 等功 能 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:能 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.11 ...要有read, write, create, ... 等功能 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./ObjDictionary_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--11 [] ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 純 粹把 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 純粹 把 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...n{DoxyCompactList}\small\item\em 純粹把 {\ttfamily std\-::map} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...em\em 純粹把 {\ttfamily std\-::map} 包 起來, 變成繼承自 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...em 純粹把 {\ttfamily std\-::map} 包起 來, 變成繼承自 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...純粹把 {\ttfamily std\-::map} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...把 {\ttfamily std\-::map} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ... {\ttfamily std\-::map} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...\ttfamily std\-::map} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...family std\-::map} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ily std\-::map} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./ObjProperties_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--6 [] [256] ! Package inputenc Error: Unicode char \u8:目 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 \begin{DoxyCompactList}\small\item\em 目 前擺爛中 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:前 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 \begin{DoxyCompactList}\small\item\em 目前 擺爛中 \end{DoxyCompactL... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擺 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...n{DoxyCompactList}\small\item\em 目前擺 爛中 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:爛 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...oxyCompactList}\small\item\em 目前擺爛 中 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.10 ...CompactList}\small\item\em 目前擺爛中 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./ObjSelector_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--11 [] ! Package inputenc Error: Unicode char \u8:利 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 利 用register的概念, 達到ru... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 \begin{DoxyCompactList}\small\item\em 利用 register的概念, 達到ru... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...mpactList}\small\item\em 利用register的 概念, 達到runtime用st... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:概 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ctList}\small\item\em 利用register的概 念, 達到runtime用strin... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:念 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ist}\small\item\em 利用register的概念 , 達到runtime用string... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:達 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...small\item\em 利用register的概念, 達 到runtime用string選擇... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ll\item\em 利用register的概念, 達到 runtime用string選擇要n... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ... 利用register的概念, 達到runtime用 string選擇要new的class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:選 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...gister的概念, 達到runtime用string選 擇要new的class \end{Dox... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:擇 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...ter的概念, 達到runtime用string選擇 要new的class \end{DoxyCo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:要 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...的概念, 達到runtime用string選擇要 new的class \end{DoxyCompa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.15 ...念, 達到runtime用string選擇要new的 class \end{DoxyCompactList... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./ObjTypes_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--8 [] ! Package inputenc Error: Unicode char \u8:純 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 純 粹把給定的 {\ttfamily Typ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:粹 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 \begin{DoxyCompactList}\small\item\em 純粹 把給定的 {\ttfamily Typ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:把 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...n{DoxyCompactList}\small\item\em 純粹把 給定的 {\ttfamily Type}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...oxyCompactList}\small\item\em 純粹把給 定的 {\ttfamily Type} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...CompactList}\small\item\em 純粹把給定 的 {\ttfamily Type} 包... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...pactList}\small\item\em 純粹把給定的 {\ttfamily Type} 包起... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:包 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...em 純粹把給定的 {\ttfamily Type} 包 起來, 變成繼承自 \h... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:起 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...純粹把給定的 {\ttfamily Type} 包起 來, 變成繼承自 \hype... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...粹把給定的 {\ttfamily Type} 包起來 , 變成繼承自 \hyperli... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:變 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...給定的 {\ttfamily Type} 包起來, 變 成繼承自 \hyperlink{cl... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...定的 {\ttfamily Type} 包起來, 變成 繼承自 \hyperlink{class... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:繼 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...的 {\ttfamily Type} 包起來, 變成繼 承自 \hyperlink{classmeo... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:承 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ... {\ttfamily Type} 包起來, 變成繼承 自 \hyperlink{classmeow_1... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.12 ...\ttfamily Type} 包起來, 變成繼承自 \hyperlink{classmeow_1_1O... Your command was ignored. Type I to replace it with another command, or to continue without it. [257]) (./Register__Implement_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--6 [] ) (./Register__Implement_8hpp.tex Underfull \hbox (badness 10000) in paragraph at lines 4--5 [] ) (./Self_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--5 [] ) (./Usage_8h.tex Underfull \hbox (badness 10000) in paragraph at lines 4--10 [] [258] ! Package inputenc Error: Unicode char \u8:管 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 管 理參數設置, 自訂usage d... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:理 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 \begin{DoxyCompactList}\small\item\em 管理 參數設置, 自訂usage d... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:參 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...n{DoxyCompactList}\small\item\em 管理參 數設置, 自訂usage doc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...oxyCompactList}\small\item\em 管理參數 設置, 自訂usage docume... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:設 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...CompactList}\small\item\em 管理參數設 置, 自訂usage document,... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:置 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...pactList}\small\item\em 管理參數設置 , 自訂usage document, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:自 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...ist}\small\item\em 管理參數設置, 自 訂usage document, 分析a... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:訂 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...}\small\item\em 管理參數設置, 自訂 usage document, 分析argc... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:分 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...理參數設置, 自訂usage document, 分 析argc, argv \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:析 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.14 ...參數設置, 自訂usage document, 分析 argc, argv \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ) (./Usage_8hpp.tex Underfull \hbox (badness 10000) in paragraph at lines 4--12 [] ) (./utility_8hpp.tex Underfull \hbox (badness 10000) in paragraph at lines 4--13 [] ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 \begin{DoxyCompactList}\small\item\em 類 似\-C的printf, 不過是將... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:似 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 \begin{DoxyCompactList}\small\item\em 類似 \-C的printf, 不過是將... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...oxyCompactList}\small\item\em 類似\-C的 printf, 不過是將格式... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...ist}\small\item\em 類似\-C的printf, 不 過是將格式化的字... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...}\small\item\em 類似\-C的printf, 不過 是將格式化的字串... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...mall\item\em 類似\-C的printf, 不過是 將格式化的字串丟... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...l\item\em 類似\-C的printf, 不過是將 格式化的字串丟到 {... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:格 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...tem\em 類似\-C的printf, 不過是將格 式化的字串丟到 {\tt... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...\em 類似\-C的printf, 不過是將格式 化的字串丟到 {\ttfam... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:化 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ... 類似\-C的printf, 不過是將格式化 的字串丟到 {\ttfamily... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...似\-C的printf, 不過是將格式化的 字串丟到 {\ttfamily st... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...\-C的printf, 不過是將格式化的字 串丟到 {\ttfamily std\-... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...C的printf, 不過是將格式化的字串 丟到 {\ttfamily std\-::s... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:丟 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...printf, 不過是將格式化的字串丟 到 {\ttfamily std\-::stri... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:到 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...intf, 不過是將格式化的字串丟到 {\ttfamily std\-::string}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:裡 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...字串丟到 {\ttfamily std\-::string} 裡 回傳 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:回 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...串丟到 {\ttfamily std\-::string} 裡回 傳 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:傳 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.22 ...丟到 {\ttfamily std\-::string} 裡回傳 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 \begin{DoxyCompactList}\small\item\em 將 輸入字串中的某個patter... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:輸 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 \begin{DoxyCompactList}\small\item\em 將輸 入字串中的某個patter... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:入 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...n{DoxyCompactList}\small\item\em 將輸入 字串中的某個pattern... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...oxyCompactList}\small\item\em 將輸入字 串中的某個pattern取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...CompactList}\small\item\em 將輸入字串 中的某個pattern取代... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...pactList}\small\item\em 將輸入字串中 的某個pattern取代成... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...tList}\small\item\em 將輸入字串中的 某個pattern取代成另... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:某 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...st}\small\item\em 將輸入字串中的某 個pattern取代成另一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...\small\item\em 將輸入字串中的某個 pattern取代成另一個p... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...m\em 將輸入字串中的某個pattern取 代成另一個pattern \en... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:代 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...m 將輸入字串中的某個pattern取代 成另一個pattern \end{D... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:成 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...輸入字串中的某個pattern取代成 另一個pattern \end{Doxy... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:另 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...入字串中的某個pattern取代成另 一個pattern \end{DoxyCom... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...字串中的某個pattern取代成另一 個pattern \end{DoxyCompac... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.24 ...串中的某個pattern取代成另一個 pattern \end{DoxyCompactLi... Your command was ignored. Type I to replace it with another command, or to continue without it. [259] ! Package inputenc Error: Unicode char \u8:檢 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 \begin{DoxyCompactList}\small\item\em 檢 查給定字串的結尾是否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:查 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 \begin{DoxyCompactList}\small\item\em 檢查 給定字串的結尾是否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...n{DoxyCompactList}\small\item\em 檢查給 定字串的結尾是否... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...oxyCompactList}\small\item\em 檢查給定 字串的結尾是否符... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...CompactList}\small\item\em 檢查給定字 串的結尾是否符合... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...pactList}\small\item\em 檢查給定字串 的結尾是否符合給... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...tList}\small\item\em 檢查給定字串的 結尾是否符合給定... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:結 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...st}\small\item\em 檢查給定字串的結 尾是否符合給定的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:尾 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...\small\item\em 檢查給定字串的結尾 是否符合給定的數... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:是 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...all\item\em 檢查給定字串的結尾是 否符合給定的數個pa... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:否 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...\item\em 檢查給定字串的結尾是否 符合給定的數個patte... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:符 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...em\em 檢查給定字串的結尾是否符 合給定的數個patterns... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:合 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...em 檢查給定字串的結尾是否符合 給定的數個patterns中... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:給 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...檢查給定字串的結尾是否符合給 定的數個patterns中的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:定 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...查給定字串的結尾是否符合給定 的數個patterns中的一... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...給定字串的結尾是否符合給定的 數個patterns中的一個... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...定字串的結尾是否符合給定的數 個patterns中的一個 \e... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...字串的結尾是否符合給定的數個 patterns中的一個 \end{... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:中 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...尾是否符合給定的數個patterns中 的一個 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...是否符合給定的數個patterns中的 一個 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:一 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...否符合給定的數個patterns中的一 個 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.26 ...符合給定的數個patterns中的一個 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 將 兩個字串用人類習慣的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:兩 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 \begin{DoxyCompactList}\small\item\em 將兩 個字串用人類習慣的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...n{DoxyCompactList}\small\item\em 將兩個 字串用人類習慣的... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:字 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...oxyCompactList}\small\item\em 將兩個字 串用人類習慣的檔... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:串 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...CompactList}\small\item\em 將兩個字串 用人類習慣的檔名... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...pactList}\small\item\em 將兩個字串用 人類習慣的檔名排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:人 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...tList}\small\item\em 將兩個字串用人 類習慣的檔名排序... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:類 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...st}\small\item\em 將兩個字串用人類 習慣的檔名排序方... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:習 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\small\item\em 將兩個字串用人類習 慣的檔名排序方式... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:慣 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...all\item\em 將兩個字串用人類習慣 的檔名排序方式排... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...\item\em 將兩個字串用人類習慣的 檔名排序方式排序 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:檔 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...em\em 將兩個字串用人類習慣的檔 名排序方式排序 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:名 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...em 將兩個字串用人類習慣的檔名 排序方式排序 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...將兩個字串用人類習慣的檔名排 序方式排序 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...兩個字串用人類習慣的檔名排序 方式排序 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:方 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...個字串用人類習慣的檔名排序方 式排序 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:式 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...字串用人類習慣的檔名排序方式 排序 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:排 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...串用人類習慣的檔名排序方式排 序 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:序 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.40 ...用人類習慣的檔名排序方式排序 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 只 將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 \begin{DoxyCompactList}\small\item\em 只將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\small\item\em 只將 {\ttfamily sigs} 個 標準差以內的數據... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...all\item\em 只將 {\ttfamily sigs} 個標 準差以內的數據拿... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...\item\em 只將 {\ttfamily sigs} 個標準 差以內的數據拿來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...em\em 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...em 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...只將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均 \... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...將 {\ttfamily sigs} 個標準差以內的 數據拿來取平均 \end... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ... {\ttfamily sigs} 個標準差以內的數 據拿來取平均 \end{Do... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...ttfamily sigs} 個標準差以內的數據 拿來取平均 \end{DoxyC... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...amily sigs} 個標準差以內的數據拿 來取平均 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...ly sigs} 個標準差以內的數據拿來 取平均 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...sigs} 個標準差以內的數據拿來取 平均 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...s} 個標準差以內的數據拿來取平 均 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.44 ...個標準差以內的數據拿來取平均 \end{DoxyCompactList}\item Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:只 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 只 將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:將 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 \begin{DoxyCompactList}\small\item\em 只將 {\ttfamily sigs} 個標準... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:個 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...\small\item\em 只將 {\ttfamily sigs} 個 標準差以內的數據... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:標 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...all\item\em 只將 {\ttfamily sigs} 個標 準差以內的數據拿... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:準 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...\item\em 只將 {\ttfamily sigs} 個標準 差以內的數據拿來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:差 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...em\em 只將 {\ttfamily sigs} 個標準差 以內的數據拿來取... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:以 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...em 只將 {\ttfamily sigs} 個標準差以 內的數據拿來取平... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:內 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...只將 {\ttfamily sigs} 個標準差以內 的數據拿來取平均, ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:的 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...將 {\ttfamily sigs} 個標準差以內的 數據拿來取平均, 不... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:數 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ... {\ttfamily sigs} 個標準差以內的數 據拿來取平均, 不過... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:據 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ttfamily sigs} 個標準差以內的數據 拿來取平均, 不過這... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:拿 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...amily sigs} 個標準差以內的數據拿 來取平均, 不過這次... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...ly sigs} 個標準差以內的數據拿來 取平均, 不過這次用... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:取 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...sigs} 個標準差以內的數據拿來取 平均, 不過這次用 {\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...s} 個標準差以內的數據拿來取平 均, 不過這次用 {\ttf... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...個標準差以內的數據拿來取平均 , 不過這次用 {\ttfami... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:不 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...準差以內的數據拿來取平均, 不 過這次用 {\ttfamily p}... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:過 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...差以內的數據拿來取平均, 不過 這次用 {\ttfamily p} ... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:這 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...以內的數據拿來取平均, 不過這 次用 {\ttfamily p} 來... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:次 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...內的數據拿來取平均, 不過這次 用 {\ttfamily p} 來加... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:用 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...的數據拿來取平均, 不過這次用 {\ttfamily p} 來加權... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:來 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...平均, 不過這次用 {\ttfamily p} 來 加權平均 \end{DoxyComp... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:加 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...均, 不過這次用 {\ttfamily p} 來加 權平均 \end{DoxyCompact... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:權 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ..., 不過這次用 {\ttfamily p} 來加權 平均 \end{DoxyCompactLis... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:平 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...不過這次用 {\ttfamily p} 來加權平 均 \end{DoxyCompactList}\... Your command was ignored. Type I to replace it with another command, or to continue without it. ! Package inputenc Error: Unicode char \u8:均 not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.46 ...過這次用 {\ttfamily p} 來加權平均 \end{DoxyCompactList}\end... Your command was ignored. Type I to replace it with another command, or to continue without it. ) No file refman.ind. Package atveryend Info: Empty hook `BeforeClearDocument' on input line 205. [260] Package atveryend Info: Empty hook `AfterLastShipout' on input line 205. (./refman.aux) Package atveryend Info: Executing hook `AtVeryEndDocument' on input line 205. Package atveryend Info: Executing hook `AtEndAfterFileList' on input line 205. Package rerunfilecheck Warning: File `refman.out' has changed. (rerunfilecheck) Rerun to get outlines right (rerunfilecheck) or use package `bookmark'. Package rerunfilecheck Info: Checksums for `refman.out': (rerunfilecheck) Before: (rerunfilecheck) After: D66100530AFFCDCECB34ACC40CF592AA;209974. LaTeX Warning: There were undefined references. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. Package atveryend Info: Empty hook `AtVeryVeryEnd' on input line 205. ) Here is how much of TeX's memory you used: 19428 strings out of 494715 379024 string characters out of 6174135 298959 words of memory out of 5000000 18710 multiletter control sequences out of 15000+600000 82965 words of font info for 168 fonts, out of 8000000 for 9000 102 hyphenation exceptions out of 8191 41i,11n,58p,1852b,1428s stack positions out of 5000i,500n,10000p,200000b,80000s pdfTeX warning (dest): name{classint32__t} has been referenced but does not e xist, replaced by a fixed one pdfTeX warning (dest): name{classdouble} has been referenced but does not exist , replaced by a fixed one pdfTeX warning (dest): name{classint} has been referenced but does not exist, r eplaced by a fixed one {/usr/share/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc} Output written on refman.pdf (261 pages, 1001471 bytes). PDF statistics: 9138 PDF objects out of 10688 (max. 8388607) 8701 compressed objects within 88 object streams 3567 named destinations out of 3580 (max. 500000) 171 words of extra memory for PDF output out of 10000 (max. 10000000)